Designated Trades and Restricted Activities Regulation

(Consolidated up to 70/2026) alberta regulation 161/2022 Skilled Trades and Apprenticeship Education Act DESIGNATED TRADES AND RESTRICTED ACTIVITIES REGULATION Table of Contents 1 Definitions Part 1 Designated Trades and Restricted Activities 2 Designated trades 3 Restricted activities Part 2 Alberta Board of Skilled Trades 4 Board member term of office 5 Board bylaws 6 Additional functions of the Board 7 Committee member term of office 8 Committee member remuneration and expenses Part 3 Administrator 9 Alberta Journeyperson Certificate 10 Endorsements 11 Issuance of endorsements 12 Additional functions of the Administrator 13 Authorization to perform restricted activities 14 Factory mass production, in‑plant assembly operations and in‑plant processing of natural resources 14.1 Suspension of trade certificates or endorsements 14.2 Revocation of trade certificates or endorsements 14.3 Service of Administrator decisions 14.4 Additional reconsideration rights 15 Reconsideration process 16 Review of reconsiderations 17 Suspension of trade certificates or endorsements 18 Revocation of trade certificates or endorsements Part 4 General 19 Coming into force Schedules Definitions 1 (1) In this Regulation, (a) “Act” means the Skilled Trades and Apprenticeship Education Act ; (a.1) “ Apprenticeship Education and Industry Training Programs Regulation ” means the Apprenticeship Education and Industry Training Programs Regulation (AR 160/2022); (b) “employer” means a person who employs an individual to perform restricted activities within a designated trade or branch of a designated trade; (c) “student work training program” means a program (i) under which an individual receives work experience and training in a designated trade or branch of a designated trade, (ii) that is offered to the individual by or on behalf of (A) a board as defined in the Education Act , (B) an operator of a school that is a charter school as defined in the Education Act , (C) a person responsible for the operation of an independent school as defined in the Education Act , (D) a university as defined in the Post‑secondary Learning Act , (E) a comprehensive community college as defined in the Post‑secondary Learning Act , (F) a polytechnic institution as defined in the Post‑secondary Learning Act , or (G) a person licensed to provide vocational training under the Private Vocational Training Act , and (iii) that is recognized by the Registrar under section 6(2)(a) and (b) of the Act as being the equivalent of (A) classroom instruction or on‑the‑job instruction that is required as part of an apprenticeship education program, or (B) training that is required as part of an industry training program. (2) For the purposes of sections 14.3, 14.4, 15 and 16, an affected person in relation to an authorization under section 13 includes an employer who has applied for the authorization but does not include any employees of that employer. AR 161/2022 s1;121/2023;136/2025;70/2026 Part 1 Designated Trades and Restricted Activities Designated trades 2 (1) The trades that are listed in Schedule 1 are designated trades under the Act. (2) A designated trade includes any branches of the designated trade that are listed in Schedule 1. Restricted activities 3 Where there are activities within a designated trade or branch of a designated trade that are restricted activities under the Act, those restricted activities and the classes of individuals who may perform those restricted activities are set out in Schedule 2. Part 2 Alberta Board of Skilled Trades Board member term of office 4 (1) The term of an appointment as a member of the Board shall not exceed 3 years and an individual shall not hold office as a member of the Board for a continuous period exceeding 9 years. (2) A member of the Board shall not hold a designation as chair of the Board under section 13(2) of the Act for a continuous period exceeding 6 years. (3) An individual who has held office as a member of the Board for the maximum continuous period allowed by subsection (1) may not hold office as a member of the Board in the following 3‑year period. (4) The term of an appointment as a member of the Board or of a designation as chair of the Board continues, if applicable, after the end of the actual term for which the appointment or designation was made, regardless of the 9‑year limitation under subsection (1) or the 6‑year limitation under subsection (2), until the earliest of (a) the effective date of the appointment or reappointment replacing that appointment or the designation or redesignation replacing that designation, (b) any other event that terminates the appointment or designation, and (c) 3 months after the actual term of the appointment or designation ends. Board bylaws 5 (1) With the approval of the Minister, the Board shall make bylaws respecting (a) the conduct of the business and affairs of the Board in carrying out its duties and exercising its powers, and (b) the calling and conducting of and the procedures governing meetings of the Board. (2) For greater certainty, and without limiting the generality of section 14(3) of the Act, the Regulations Act does not apply to bylaws made by the Board under subsection (1). Additional functions of the Board 6 (1) The additional functions of the Board referred to in section 14(1)(e) of the Act are (a) to promote the establishment and maintenance of welcoming and inclusive work environments for designated trades, (b) to advise the Minister on matters related to endorsements, (c) to advise the Administrator on suspensions or revocations of trade certificates or endorsements, (d) to advise the Registrar on competencies for apprenticeship education programs and industry training programs related to designated trades, and (e) if the Board considers it appropriate to do so, to designate one member of a committee established by the Board under section 15 of the Act as chair of the committee and one or more other members of the committee to act in the place of the chair when the chair is absent or is otherwise unable to carry out the duties of the chair. (2) For greater certainty, and without limiting the generality of section 14(3) of the Act, the Regulations Act does not apply in respect of any documentation prepared by or on behalf of the Board relating to the carrying out of any functions under subsection (1). Committee member term of office 7 (1) The term of an appointment as a member of a committee established by the Board under section 15 of the Act shall not exceed 3 years and an individual shall not hold office as a member of such a committee for a continuous period exceeding 9 years. (2) A member of a committee established by the Board under section 15 of the Act shall not hold a designation as chair of the committee under section 6(1)(e) for a continuous period exceeding 6 years. (3) An individual who has held office as a member of a committee established by the Board under section 15 of the Act for the maximum continuous period allowed by subsection (1) may not hold office as a member of the committee in the following 3‑year period. (4) The term of an appointment as a member of a committee established by the Board under section 15 of the Act or of a designation as chair of such a committee continues, if applicable, after the end of the actual term for which the appointment or designation was made, regardless of the 9‑year limitation under subsection (1) or the 6‑year limitation under subsection (2), until the earliest of (a) the effective date of the appointment or reappointment replacing that appointment or the designation or redesignation replacing that designation, (b) any other event that terminates the appointment or designation, and (c) 3 months after the actual term of the appointment or designation ends. Committee member remuneration and expenses 8 Members of a committee established by the Board under section 15 of the Act, other than any members who are employees of the Government of Alberta, are entitled to be paid (a) remuneration for the carrying out of their duties as members in accordance with section 1 of Part B of Schedule 1 to the Committee Remuneration Order in Appendix 3 to Order in Council numbered O.C. 466/2007, even where the member holds a designation as chair of the committee under section 6(1)(e), and (b) travelling and living expenses necessarily incurred in the carrying out of their duties as members in accordance with any directive issued by the Treasury Board respecting travel, meal and hospitality expenses, as though the members were employees as defined in the Public Service Act . Part 3 Administrator Alberta Journeyperson Certificate 9 A trade certificate (a) referred to in section 1(r)(i) of the Act, and (b) issued by the Administrator under section 18(1)(c)(i) of the Act to an individual in a designated trade or branch of a designated trade shall be known as an Alberta Journeyperson Certificate. Endorsements 10 (1) For the purposes of the Act and the regulations made under the Act, “endorsement”, in respect of a designated trade or branch of a designated trade, means the following: (a) a Red Seal Endorsement issued by the Administrator under section 18(1)(c)(i) of the Act and in accordance with section 11 of this Regulation; (b) a document issued outside of Alberta to an individual and recognized by the Administrator under section 12(d)(iv) as being the equivalent of an endorsement referred to in clause (a); (c) a Red Seal Endorsement recognized under subsection (2). (2) For the purposes of the Act and the regulations made under the Act, a Red Seal Endorsement that was issued or recognized under the Apprenticeship and Industry Training Act , RSA 2000 cA‑42, is recognized as being the equivalent of an endorsement referred to in subsection (1)(a). Issuance of endorsements 11 (1) The Administrator may issue under section 18(1)(c)(i) of the Act a Red Seal Endorsement in a designated trade or branch of a designated trade to an individual who has met the standards and requirements respecting that endorsement established by the Canadian Council of Directors of Apprenticeship under the Interprovincial Standards Red Seal Program. (2) Only an individual who holds a trade certificate with the Red Seal Endorsement in a designated trade or branch of a designated trade may, in accordance with the standards and requirements established by the Canadian Council of Directors of Apprenticeship under the Interprovincial Standards Red Seal Program, use the “RSE” acronym (Red Seal Endorsement). Additional functions of the Administrator 12 The additional functions of the Administrator referred to in section 18(1)(g) of the Act are (a) to administer the standards and requirements, respecting the Red Seal Endorsement in a designated trade or branch of a designated trade, established by the Canadian Council of Directors of Apprenticeship under the Interprovincial Standards Red Seal Program, (b) to carry out the functions in section 13 with respect to authorizations to perform restricted activities within a designated trade or branch of a designated trade, (i) grant the authorization if the Administrator is satisfied that all applicable requirements for the authorization are met, or (ii) reject the application and refuse to grant the authorization if the Administrator is not satisfied that all applicable requirements for the authorization are met, (c) to determine whether a committee process is appropriate to evaluate the skills and knowledge in a designated trade or branch of a designated trade of an individual who, in the opinion of the Administrator, may have failed to demonstrate the skills and knowledge in the designated trade or branch of the designated trade expected of an individual who holds a trade certificate or, if applicable, an endorsement in the designated trade or branch of the designated trade and, if the Administrator determines that such a process is appropriate, to establish such a process, and (d) if the Administrator considers it appropriate to do so, (i) to suspend or revoke an endorsement under section 14.1 or 14.2, (ii) to award credit, in the form of time in an amount determined by the Administrator, for an individual’s work experience in a designated trade or branch of a designated trade, which credit shall apply towards the individual’s satisfaction of the standards and requirements for certification in the designated trade or branch of the designated trade established by order of the Board under section 14(2)(b) of the Act, (iii) to recognize an education or training program, other than an apprenticeship education program or an industry training program, as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate, (iv) to recognize a document that is issued outside of Alberta to an individual as being the equivalent of an endorsement referred to in section 10(1)(a), and (v) with respect to recognitions under clause (iv), to suspend or revoke a recognition under section 14.1 or 14.2. AR 161/2022 s12;121/2023 Authorization to perform restricted activities 13 (1) On application and subject to subsection (6), the Administrator may issue an authorization to perform a restricted activity within a designated trade or branch of a designated trade to an individual or a group of individuals who are not otherwise permitted to perform a restricted activity within the designated trade or branch of the designated trade. (1.1) The Administrator may issue an authorization on application or on the Administrator’s own motion. (2) The Administrator may impose any terms and conditions on an authorization issued under subsection (1) that the Administrator considers appropriate in the circumstances. (3) At any time that the Administrator considers it appropriate in the circumstances, the Administrator may do the following: (a) revoke an authorization issued under subsection (1); (b) impose, alter or revoke any terms and conditions on an authorization issued under subsection (1). (4) An individual who is performing a restricted activity within a designated trade or branch of a designated trade under an authorization issued under subsection (1) shall not perform the restricted activity except in accordance with the authorization. (5) The Regulations Act does not apply in respect of any authorization issued by the Administrator under subsection (1) or documentation prepared by or on behalf of the Administrator relating to an authorization issued under subsection (1). (6) The Administrator shall take into account the following factors when deciding whether to issue an authorization to an individual or a group of individuals under subsection (1): (a) the degree of risk resulting from the restricted activity to the public, the individual or group of individuals and the coworkers of the individual or group of individuals; (b) whether, at the time that the individual or group of individuals are to perform the restricted activity, the individual or group of individuals will have sufficient training (i) to ensure proper and safe handling or application of any dangerous substances, destructive equipment or dangerous techniques or practices that the individual or group of individuals will use to perform the restricted activity, and (ii) to maintain a standard of quality and skill satisfactory to the Administrator in the performance of the restricted activity; (c) the potential benefit to the individual or group of individuals resulting from the authorization; (d) whether the restricted activity relates to the carrying out of warranty work; (e) the rationale for having the individual or group of individuals, instead of an apprentice or individual who holds a trade certificate or, if applicable, an endorsement in the designated trade or branch of the designated trade, perform the restricted activity; (f) the period of time during which the authorization is to be in effect; (g) any efforts to encourage the individual or group of individuals to meet the standards and requirements for issuance of a trade certificate or, if applicable, an endorsement in the designated trade or branch of the designated trade within a specified period of time; (h) any consultation between employee or employer groups affected by the authorization; (i) the potential effect of the authorization, or a refusal to issue the authorization, on the following: (i) the designated trade or branch of the designated trade; (ii) the operation, productivity and economic competitiveness and prosperity of a plant or business operation; (iii) the economic competitiveness and prosperity of (A) the Province of Alberta, and (B) competitors in the industry in which the restricted activity is to be performed; (j) any other factors that, in the opinion of the Administrator, are relevant. AR 161/2022 s13;121/2023 Factory mass production, in‑plant assembly operations and in‑plant processing of natural resources 14 (1) In subsection (4), “shutdown” means the complete or partial stoppage of (a) the operation of a component or part of a component in a plant, (b) a piece of equipment in a plant, (c) a section of a plant or process within a plant, or (d) an entire plant to allow for the expansion of a plant, the installation of new equipment in a plant or to upgrade or repair existing components or equipment in a plant. (2) Subject to subsection (4) and any orders made by the Administrator under subsection (5), an individual may perform a restricted activity within a designated trade or branch of a designated trade if the individual is engaged in work that consists primarily of factory mass production or in‑plant assembly operations where products or components are produced or assembled (a) through a pre‑defined and documented set of steps, (b) in a controlled environment in a permanent facility, (c) by individuals who are trained appropriately in the opinion of the Administrator, and (d) under supervision and inspections that are appropriate in the opinion of the Administrator. (3) Subject to subsection (4) and any orders made by the Administrator under subsection (5), an individual may perform a restricted activity within a designated trade or branch of a designated trade if the individual is engaged in in‑plant processing, or operations supporting in‑plant processing, of natural resources through the collection, refinement and transformation of these resources into a final product where the work consists of recurring or repetitive, documented operations and is performed (a) on site in a processing plant, along a pipeline or at an extraction, collection or harvesting site, (b) by individuals who are trained appropriately in the opinion of the Administrator, and (c) under supervision and inspections that are appropriate in the opinion of the Administrator. (4) The construction or modification of (a) a component or part of a component in a plant, (b) a piece of equipment in a plant, (c) a process within a plant, (d) a section of a plant, or (e) an entire plant during new construction or plant shutdown periods does not qualify as a type of work to which subsection (2) or (3) applies unless it already was occurring regularly while the plant was operational. (5) Where a type of work referred to in subsection (2) or (3) is being carried out or is purportedly being carried out, the Administrator may, at any time, by order declare that subsection (2) or (3), as applicable, does not apply to the work and revoke or deny permission for the individual to perform a restricted activity within a designated trade or branch of a designated trade under subsection (2) or (3), as applicable, if the Administrator is of the opinion that (a) the training, supervision and inspections respecting the work are not appropriate, or (b) the work is not a type of work to which subsection (2) or (3) applies. (6) The Administrator shall rescind an order made under subsection (5) if the Administrator is satisfied that (a) the training, supervision and inspections respecting the work that is the subject of the order are appropriate, and (b) if applicable, the work that is the subject of the order has been modified so that it is a type of work to which subsection (2) or (3) applies. (7) The Regulations Act does not apply in respect of any order made by the Administrator under subsection (5) or documentation prepared by or on behalf of the Administrator relating to an order made under subsection (5). Suspension of trade certificates or endorsements 14.1 (1) Under section 19 of the Act, the Administrator may suspend (a) an Alberta Journeyperson Certificate held by an individual, and (b) in respect of an individual, a recognition under section 14(2)(c) of the Act of a document issued outside of Alberta to an individual as being the equivalent of an Alberta Journeyperson Certificate in accordance with subsection (3). (2) In accordance with subsection (3), the Administrator may suspend, on any terms and conditions the Administrator considers appropriate in the circumstances, (a) an endorsement referred to in section 10(1)(a) or (c) held by an individual, and (b) in respect of an individual, a recognition under section 12(d)(iv) of a document issued outside of Alberta to an individual as being the equivalent of an endorsement referred to in section 10(1)(a). (3) The Administrator may only order a suspension under section 19 of the Act or subsection (2) if there is an inspection in progress related to (a) compliance by the individual with the Act or regulations made under the Act, or (b) failure by the individual to demonstrate the skills and knowledge in a designated trade or branch of a designated trade expected of an individual who holds a trade certificate or, if applicable, an endorsement in the designated trade or branch of the designated trade. (4) If, in the opinion of the Administrator, the individual has failed to demonstrate the skills and knowledge in a designated trade or branch of a designated trade expected of an individual who holds a trade certificate or, if applicable, an endorsement in the designated trade or branch of the designated trade, a suspension under section 19 of the Act or subsection (2) may continue after the completion of an inspection referred to in subsection (3)(b). (5) If an individual is the subject of a subsisting suspension, the individual shall not perform restricted activities within the designated trade or branch of the designated trade to which the suspension relates except under the supervision of an individual who holds a trade certificate or, if applicable, an endorsement in the designated trade or branch of the designated trade. AR 121/2023 s8 Revocation of trade certificates or endorsements 14.2 (1) Under section 19 of the Act, the Administrator may revoke (a) an Alberta Journeyperson Certificate held by an individual, and (b) a recognition under section 14(2)(c) of the Act of a document issued outside of Alberta to an individual as being the equivalent of an Alberta Journeyperson Certificate in accordance with subsection (3). (2) In accordance with subsection (3), the Administrator may revoke (a) an endorsement referred to in section 10(1)(a) or (c) held by an individual, and (b) a recognition under section 12(d)(iv) of a document issued outside of Alberta to an individual as being the equivalent of an endorsement referred to in section 10(1)(a). (3) The Administrator may only order a revocation under section 19 of the Act or subsection (2) if, in the opinion of the Administrator, (a) the individual has failed to comply with the Act or regulations made under the Act, (b) the individual has failed to demonstrate the skills and knowledge in a designated trade or branch of a designated trade expected of an individual who holds a trade certificate or, if applicable, an endorsement in the designated trade or branch of the designated trade, (c) the Alberta Journeyperson Certificate held by the individual, the endorsement referred to in section 10(1)(a) or (c) held by the individual or the recognition or document referred to in subsection (1)(b) or (2)(b), as applicable, (i) has been altered in any manner, (ii) was obtained by means of misrepresentation or fraud, (iii) was issued due to an administrative or other error, or (iv) has been used (A) for any purpose other than the purpose for which it was issued, or (B) by any individual other than the individual to whom it was issued, (d) there has been an irregularity in the taking of an assessment required under the Act, or (e) the document referred to in subsection (1)(b) or (2)(b), as applicable, was revoked or cancelled by the issuing jurisdiction. AR 121/2023 s8 Service of Administrator decisions 14.3 (1) If the Administrator has made a decision under (a) section 18(1)(c)(ii) of the Act refusing to issue a trade certificate or endorsement, (b) section 19 of the Act suspending or revoking a trade certificate or the recognition of a document issued outside Alberta as being the equivalent of a trade certificate, (c) section 13 (i) revoking or refusing to issue an authorization, or (ii) imposing, altering or revoking terms and conditions of an authorization, (d) section 14(5) revoking or denying permission for an individual to perform a restricted activity within a designated trade or branch of a designated trade, (e) section 14.1(2) suspending an endorsement or a recognition of a document issued outside Alberta as being the equivalent of an endorsement, or (f) section 14.2(2) revoking an endorsement or a recognition of a document issued outside Alberta as being the equivalent of an endorsement, the Administrator shall comply with the requirements in subsection (2). (2) If this subsection applies, the Administrator shall serve on the affected person (a) the written decision of the Administrator, (b) reasons for the decision, and (c) a statement of the right of the person to request a reconsideration of the decision of the Administrator under section 15. AR 121/2023 s8 Additional reconsideration rights 14.4 If the Administrator has made a decision listed in section 14.3(1)(b) to (f), an affected person may request, under section 20(c) of the Act, that the Administrator reconsider the decision. AR 121/2023 s8 Reconsideration process 15 (1) A request for reconsideration under section 20 of the Act must be made by application. (2) An application for the Registrar to reconsider a decision must (a) be in writing, (b) be served on the Administrator within 30 days of the date the person is served with the written decision, and (c) include the following: (i) the name and mailing address of the person; (ii) the phone number or email address of the person; (iii) the decision to be reconsidered; (iv) the reason for requesting the reconsideration; (v) if applicable, any other information (A) requested by the Administrator, or (B) that the person wishes the Administrator to take into account in the reconsideration. (3) Repealed AR 121/2023 s9. (4) On being served an application that complies with subsection (3), the Administrator (a) may decide to confirm, reverse or vary the decision that is the subject of the reconsideration, and (b) within 60 days of being served the application, shall serve on the person the decision of the Administrator to confirm, reverse or vary the decision that is the subject of the reconsideration. (5) A decision of the Administrator under subsection (4) must be in writing and include (a) reasons for confirming, reversing or varying the decision that is the subject of the reconsideration, and (b) a statement of the right of the person to request a review by the Minister under section 16 of the decision of the Administrator to confirm, reverse or vary the decision that is the subject of the reconsideration. (6) A deputy Administrator does not have authority to exercise any of the powers of the Administrator in this section, and the Administrator shall not delegate any of the powers or functions of the Administrator under this section to any person. AR 161/2022 s15;121/2023 Review of reconsiderations 16 (1) If the Administrator has made a reconsideration decision under section 15(4), an affected person may request, by application, a review by the Minister of the reconsideration decision of the Administrator. (2) Repealed AR 121/2023 s10. (3) An application under subsection (1) must (a) be in writing, (b) be served on the Minister and the Administrator within 45 days of the date shown on the reconsideration decision of the Administrator, and (c) include the following: (i) the name and mailing address of the person; (ii) the phone number or email address of the person; (iii) the reconsideration decision to be reviewed; (iv) the reason for requesting the review; (v) if applicable, any other information (A) requested by the Minister, or (B) that the person wishes the Minister to take into account in the review. (4) On being served an application that complies with subsection (3), the Minister may decide to confirm, reverse or vary the reconsideration decision of the Administrator. (5) A decision of the Minister under subsection (4) must be in writing and include reasons for confirming, reversing or varying the reconsideration decision of the Administrator. (6) A decision of the Minister under this section is final. AR 161/2022 s16;121/2023 17 and 18 Repealed AR 121/2023 s11. Part 4 General Coming into force 19 This Regulation comes into force on the coming into force of section 22(2) of the Skilled Trades and Apprenticeship Education Act . Schedule 1 Designated Trades 1 The following trades are designated trades under the Act: (a) agricultural equipment technician; (b) appliance service technician, including the (i) appliance service technician branch, and (ii) commercial appliance service technician branch of the trade; (c) auto body technician, including the (i) auto body prepper branch, (ii) auto body refinisher branch, (iii) auto body repairer branch, and (iv) auto body technician branch of the trade; (d) automotive service technician; (e) baker; (f) boilermaker; (g) bricklayer; (h) cabinetmaker; (i) carpenter; (j) cathodic protection technician, including the (i) level one branch, and (ii) level two branch of the trade; (k) communication technician; (l) concrete finisher; (m) construction craft worker; (n) cook; (o) crane and hoisting equipment operator, including the (i) boom truck operator branch, (ii) mobile crane operator branch, (iii) tower crane operator branch, and (iv) wellhead boom truck operator branch of the trade; (p) electric motor systems technician; (q) electrician, including the (i) construction electrician branch, and (ii) industrial electrician branch of the trade; (r) elevator constructor; (s) field heat treatment technician; (t) floorcovering installer; (u) gas utility operator; (v) gasfitter, including the (i) gasfitter (class A) branch, and (ii) gasfitter (class B) branch of the trade; (w) glazier; (x) hairstylist, including the (i) barber branch, and (ii) hairstylist branch of the trade; (y) heavy equipment technician, including the (i) heavy duty equipment mechanic (off road) branch, (ii) heavy equipment technician branch, (iii) transport trailer mechanic branch, and (iv) truck and transport mechanic branch of the trade; (z) industrial construction crew supervisor; (aa) industrial mechanic (millwright); (bb) instrumentation and control technician; (cc) insulator (heat and frost); (dd) ironworker, including the (i) repealed AR 121/2023 s13, (ii) ironworker (metal building systems erector) branch, (iii) ironworker (reinforcing) branch, and (iv) ironworker (structural/ornamental) branch of the trade; (ee) landscape horticulturist; (ff) lather (interior systems mechanic); (gg) locksmith; (hh) machinist; (ii) metal fabricator (fitter); (jj) motorcycle mechanic; (kk) natural gas compression technician; (ll) oil and gas transportation services, including the (i) bed truck operator branch, (ii) bulk haul operator branch, (iii) multi‑wheel truck operator branch, (iv) supervisor branch, and (v) winch truck operator branch of the trade; (mm) outdoor power equipment technician, including the (i) power equipment branch, and (ii) recreational equipment branch of the trade; (nn) overhead door technician, including the (i) level one branch, and (ii) level two branch of the trade; (oo) painter and decorator; (pp) parts technician, including the (i) materials technician branch, and (ii) parts technician branch of the trade; (qq) plumber; (rr) power system electrician; (ss) powerline technician; (tt) recreation vehicle service technician; (uu) refrigeration and air conditioning mechanic; (vv) residential construction site manager; (ww) roofer; (xx) sheet metal worker; (yy) slickline services, including the (i) assistant operator branch, (ii) level one operator branch, (iii) level two operator branch, and (iv) level three operator branch of the trade; (zz) snubbing services, including the (i) assistant operator branch, (ii) level one operator branch, (iii) level two operator branch, (iv) level three operator branch, (v) level one supervisor branch, and (vi) level two supervisor branch of the trade; (aaa) sprinkler systems installer; (bbb) steamfitter‑pipefitter; (ccc) steel detailer, including the (i) level one branch, (ii) level two branch, and (iii) level three branch of the trade; (ddd) transport refrigeration technician; (eee) water well driller, including the (i) earth loop technician branch, and (ii) water well driller branch of the trade; (fff) welder, including the (i) welder branch, and (ii) wire process operator branch of the trade; (ggg) well testing services supervisor, including the (i) level three branch, (ii) level four branch, and (iii) level five branch of the trade. AR 161/2022 Sched 1;121/2023;70/2026 Schedule 2 Restricted Activities and Classes of Individuals Agricultural Equipment Technician Restricted activities 1 (1) In this section, (a) “agricultural equipment” means any self‑propelled, towed or stationary agricultural machinery used in farming, including any equipment and components required for the operation of the machinery, and includes the following: (i) internal combustion engines and components, both stationary and mobile; (ii) rubber tired and rubber or steel tracked towing equipment, commonly called tractors; (iii) towed primary and secondary tillage equipment commonly called ploughs (mouldboard, disk, chisel) and cultivators; (iv) towed and self‑propelled equipment commonly called seeders, inclusive of all crops; (v) towed or self‑propelled equipment commonly called sprayers or broadcasters; (vi) towed and self‑propelled harvesting equipment commonly called balers, swathers, windrowers, combines or forage harvesters; (vii) miscellaneous equipment and components required in the production, distribution and transportation of farm produce; (b) “undertakings of the designated trade” means the repair, maintenance and service of agricultural equipment. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of agricultural equipment technician: (a) repairing, maintaining and servicing of agricultural equipment, parts and components, including the following: (i) internal combustion engines and components; (ii) power trains; (iii) electrical and electronic systems; (iv) hydraulic systems; (v) steering systems; (vi) braking systems; (vii) wheels and tracked undercarriages; (viii) heating and air conditioning systems; (ix) soil preparation systems; (x) harvesting systems; (xi) spraying systems; (xii) grain handling equipment; (xiii) miscellaneous equipment and systems used in the production, distribution and transportation of farm produce; (b) with respect to gasoline and diesel internal combustion 2‑ and 4‑stroke cycle engines, (i) inspecting and testing engines and components before and after repair using a variety of hand and power tools and measuring and testing equipment, (ii) inspecting, testing, repairing and replacing components of the following: (A) liquid cooling systems; (B) air cooling filters or screening systems; (C) engine lubrication systems; (D) gasoline engine fuel systems; (E) diesel engine fuel systems; (F) air‑induction systems on diesel engines, (iii) inspecting, adjusting and replacing gasoline engine ignition components, (iv) inspecting, testing, adjusting, repairing and replacing elements of engine governor systems, (v) inspecting and replacing elements of engine exhaust systems, (vi) dismantling, repairing, replacing and reassembling damaged or worn components of cylinder heads, and (vii) dismantling, cleaning, inspecting, rebuilding and reassembling the various types of cylinder block assemblies; (c) with respect to engine starting systems, inspecting, testing, replacing and repairing components of electric starter circuits; (d) with respect to electrical systems, (i) inspecting, testing, servicing and replacing storage batteries, (ii) testing, rebuilding, adjusting and replacing components of electrical charging systems, and (iii) testing, overhauling, adjusting and replacing components of lighting, warning and safety electrical systems; (e) with respect to clutches, hydraulic couplings, transmissions and transfer cases, (i) inspecting, adjusting or replacing the following: (A) clutches and components; (B) components of hydraulic couplings; (C) components of manual shift transmissions; (D) automatic gear change transmissions; (E) single and multiple speed transfer cases, (ii) repairing clutches and components, (iii) rebuilding the following: (A) components of manual shift transmissions; (B) automatic gear change transmissions; (C) single and multiple speed transfer cases; (D) power shift transmissions, and (iv) installing single and multiple speed transfer cases; (f) with respect to drivelines, rear and front axle assemblies and differential and final drives, (i) inspecting and replacing the following: (A) drive shafts and universal joints and components; (B) components of front and rear differentials; (C) components of front and rear axles and final drives; (D) tires, wheels and components, (ii) adjusting components of front and rear differentials, and (iii) adjusting components of front and rear axles and final drives; (g) with respect to steering systems, (i) inspecting components of the following: (A) manually operated steering systems; (B) hydraulic and electronically assisted steering systems; (C) controlled differential (pivot) and articulated steering, (ii) reconditioning and replacing components of manually operated steering systems, (iii) testing, repairing, adjusting and replacing components of hydraulic and electronically assisted steering systems, and (iv) testing, repairing, replacing and adjusting components of controlled differential (pivot) and articulated steering; (h) with respect to braking systems and power take‑offs, (i) inspecting, replacing, repairing and adjusting components of the following: (A) mechanical braking systems; (B) vehicle hydraulic braking systems; (C) air and electric braking systems, (ii) testing components of mechanical braking systems, (iii) rebuilding components of vehicle hydraulic braking systems, and (iv) repairing and replacing power take‑offs; (i) with respect to cabs, canopies and cab heating systems and air conditioning systems, (i) inspecting, repairing, replacing, installing and adjusting components of cabs or canopies and cab heating systems, and (ii) inspecting, repairing, replacing, and adjusting components of cab air conditioning systems; (j) operating tow trucks and related recovery equipment to assist in repair or moving equipment to a location where repairs can be performed; (k) with respect to agricultural equipment, inspecting, adjusting, aligning, repairing and replacing components of the following: (i) ploughs; (ii) spreaders; (iii) harrows; (iv) potato planters and grain drills; (v) sprayers; (vi) grain and pea combines; (vii) potato harvesters; (viii) balers; (ix) forage harvesters; (l) testing, removing and rebuilding components of grain and pea combines; (m) testing, removing and rebuilding components of potato harvesters. Classes of individuals 2 Only the following classes of individuals may perform a restricted activity within the designated trade of agricultural equipment technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Appliance Service Technician — Appliance Service Technician Branch Restricted activities 3 (1) In this section, (a) “appliance” means the following: (i) a device or machine operated by electricity or gas that is designed and used or intended to be used for (A) the preparation, cooking or baking of food, (B) the washing or drying of dishes, utensils and cooking and baking equipment, (C) the washing or drying of clothes, (D) the disposal of garbage, (E) the filtration of air, or (F) the heating of water, including the following: (G) electric and gas ranges; (H) hood fans; (I) microwave ovens; (J) dishwashers; (K) waste compactors and waste disposers; (L) clothes washers; (M) electric and gas clothes dryers; (N) electric hot water heaters; (O) electronic air filters; (ii) a device or machine operated by electricity or gas that is designed and manufactured as a self‑contained, stand‑alone unit used or intended to be used for (A) the cooling of food or of a space, (B) the making of ice, or (C) the dehumidification of air, including the following: (D) electric and gas refrigerators; (E) ice makers; (F) electric and gas freezers; (G) air conditioners; (H) dehumidifiers; (b) “commercial appliance” means a device or machine operated by electricity or gas that is designed and used or intended to be used for (i) the preparation, cooking or baking of food, (ii) the washing or drying of dishes, utensils and cooking and baking equipment, (iii) the washing or drying of clothes, (iv) the disposal of garbage, (v) the filtration of air, or (vi) the heating of water, and includes the following: (vii) electric and gas ranges; (viii) hood fans; (ix) microwave ovens; (x) dishwashers; (xi) waste compactors and waste disposers; (xii) clothes washers; (xiii) electric and gas clothes dryers; (xiv) electronic air filters; (xv) electric hot water heaters; (c) “undertakings of the branch of the designated trade” means the installation, service, maintenance, repair, removal and replacement of appliances and commercial appliances and their related parts and components. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the appliance service technician branch of the designated trade of appliance service technician: (a) installing appliances and commercial appliances, excluding initial installations governed by electrical, gas and plumbing codes and regulations; (b) servicing, maintaining and repairing of appliances and commercial appliances; (c) installing, removing, repairing and replacing parts and components of appliances and commercial appliances; (d) diagnosing problems respecting appliances and commercial appliances; (e) using hand tools, power tools and refrigeration tools while working on appliances and commercial appliances;

(f) using, in relation to appliances and commercial appliances, electrical and other measuring and testing devices; (g) soldering and brazing on or in relation to appliances and commercial appliances; (h) wiring or installing or removing wiring in appliances and commercial appliances; (i) installing, removing or repairing hoses and piping in appliances and commercial appliances; (j) splicing similar and dissimilar metals used in or in relation to appliances and commercial appliances; (k) installing and removing gases and liquids used in appliances and commercial appliances. Classes of individuals 4 Only the following classes of individuals may perform a restricted activity within the appliance service technician branch of the designated trade of appliance service technician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Appliance Service Technician — Commercial Appliance Service Technician Branch Restricted activities 5 (1) In this section, (a) “commercial appliance” has the same meaning as in section 3(1)(b); (i) the cooking or baking of food, (ii) the washing or drying of dishes, utensils and cooking and baking equipment, (iii) the washing or drying of clothes, (iv) the disposal of garbage, (v) the filtration of air, or (vi) the heating of water, and includes the following: (vii) electric and gas ranges; (viii) hood fans; (ix) microwave ovens; (x) dishwashers; (xi) waste compactors and waste disposers; (xii) clothes washers; (xiii) electric and gas clothes dryers; (xiv) electronic air filters; (xv) electric hot water heaters; (b) “undertakings of the branch of the designated trade” means the installation, service, maintenance, repair, removal and replacement of commercial appliances and their related parts and components. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the commercial appliance service technician branch of the designated trade of appliance service technician: (a) installing commercial appliances, excluding initial installations governed by electrical, gas and plumbing codes and regulations; (b) servicing, maintaining and repairing of commercial appliances; (c) installing, removing, repairing and replacing parts and components of commercial appliances; (d) diagnosing problems respecting commercial appliances; (e) using hand tools, power tools and refrigeration tools while working on commercial appliances; (f) using, in relation to commercial appliances, electrical and other measuring and testing devices; (g) wiring or installing or removing wiring in commercial appliances; (h) installing, removing or repairing hoses and piping in commercial appliances; (i) splicing similar and dissimilar metals used in or in relation to commercial appliances. Classes of individuals 6 Only the following classes of individuals may perform a restricted activity within the commercial appliance service technician branch of the designated trade of appliance service technician: (a) any individual who holds a trade certificate in the branch of the designated trade or the appliance service technician branch of the designated trade; (b) any individual who holds an endorsement in the appliance service technician branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the appliance service technician branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the appliance service technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the appliance service technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the appliance service technician branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the appliance service technician branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Auto Body Technician — Auto Body Prepper Branch Restricted activities 7 (1) In this section, (a) “substrate” means any surface of a motor vehicle to which paint or other coatings may be applied; (b) “undertakings of the branch of the designated trade” means the following: (i) the preparation of a substrate for a finish or topcoat application where the damage is not greater than 3 mm in depth; (ii) the removal and installation of non‑structural components of the body, unibody or frame to repair collision damage to the motor vehicle. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the auto body prepper branch of the designated trade of auto body technician: (a) preparing a substrate for a finish or topcoat application where the damage is not greater than 3 mm in depth; (b) removing and installing non‑structural components of the body, unibody or frame to repair collision damage to the motor vehicle; (c) using hand, power and auto body tools to perform the restricted activities set out in this section; (d) recognizing substrate; (e) filling and sanding substrate; (f) protecting surfaces from the unintended application of a primer product, finish or topcoat; (g) removing and installing trim and non‑structural glass; (h) mixing paint and primer products; (i) applying primer, primer‑surfacer, undercoating or corrosion protection material; (j) polishing, washing and cleaning substrate. Classes of individuals 8 Only the following classes of individuals may perform a restricted activity within the auto body prepper branch of the designated trade of auto body technician: (a) any individual who holds a trade certificate in any branch of the designated trade; (b) any individual who holds an endorsement in the auto body refinisher branch or the auto body technician branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in any branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in any branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in any branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in any branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in any branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Auto Body Technician — Auto Body Refinisher Branch Restricted activities 9 (1) In this section, (a) “substrate” means any surface of a motor vehicle to which paint or other coatings may be applied; (b) “undertakings of the branch of the designated trade” means the following: (i) the preparation of a substrate for a finish or topcoat application; (ii) the application of a finish or topcoat to a substrate; (iii) the removal and installation of non-structural components of the body, unibody or frame to repair collision damage to the motor vehicle. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the auto body refinisher branch of the designated trade of auto body technician: (a) preparing a substrate for a finish or topcoat application; (b) applying a finish or topcoat to a substrate; (c) removing and installing of non‑structural components of the body, unibody or frame to repair collision damage to the motor vehicle; (d) using hand, power and auto body tools to perform the restricted activities set out in this section; (e) performing paint damage analyses and preparing refinishing estimates; (f) recognizing substrate; (g) managing paint and paint related materials and inventories; (h) filling and sanding substrate; (i) protecting surfaces from the unintended application of a primer product, finish or topcoat; (j) removing and installing trim and non‑structural glass; (k) mixing paint and primer products; (l) applying primer, primer‑surfacer, undercoating or corrosion protection material; (m) colour match paint; (n) applying a finish or topcoat; (o) polishing, washing and cleaning substrate. Classes of individuals 10 Only the following classes of individuals may perform a restricted activity within the auto body refinisher branch of the designated trade of auto body technician: (a) any individual who holds a trade certificate in the branch of the designated trade or the auto body technician branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade or the auto body technician branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the auto body technician branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the auto body technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the auto body technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the auto body technician branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the auto body technician branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Auto Body Technician — Auto Body Repairer Branch Restricted activities 11 (1) In this section, (a) “substrate” means any surface of a motor vehicle to which paint or other coatings may be applied; (b) “support system” means any part of a motor vehicle, excluding the chassis, body, unibody, frame or substrate; (c) “undertakings of the branch of the designated trade” means the following: (i) the preparation of a substrate for a finish or topcoat application; (ii) the repair of the following components of a motor vehicle: (A) the chassis or frame; (B) the body or unibody; (C) a support system damaged in a collision. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the auto body repairer branch of the designated trade of auto body technician: (a) preparing a substrate for a finish or topcoat application; (b) repairing of the following components of a motor vehicle: (i) the chassis or frame; (ii) the body or unibody; (iii) a support system damaged in a collision; (c) using hand, power and auto body tools to perform the restricted activities set out in this section; (d) performing body damage analyses and preparing repair estimates; (e) welding and cutting metal sections; (f) attaching components by welding or using adhesives or fasteners; (g) straightening, measuring or aligning motor vehicle components; (h) recognizing substrate; (i) filling and sanding substrate; (j) protecting surfaces from the unintended application of a primer product, finish or topcoat; (k) removing and installing trim and glass; (l) mixing paint and primer products; (m) applying primer, primer‑surfacer, undercoating or corrosion protection material; (n) polishing, washing and cleaning substrate. Classes of individuals 12 Only the following classes of individuals may perform a restricted activity within the auto body repairer branch of the designated trade of auto body technician: (a) any individual who holds a trade certificate in the branch of the designated trade or the auto body technician branch of the designated trade; (b) any individual who holds an endorsement in the auto body technician branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the auto body technician branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the auto body technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the auto body technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the auto body technician branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the auto body technician branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Auto Body Technician — Auto Body Technician Branch Restricted activities 13 (1) In this section, (a) “substrate” means any surface of a motor vehicle to which paint or other coatings may be applied; (b) “support system” means any part of a motor vehicle, excluding the chassis, body, unibody, frame or substrate; (c) “undertakings of the branch of the designated trade” means the following: (i) the preparation of a substrate for a finish or topcoat application; (ii) the application of a finish or topcoat to a substrate; (iii) the repair of the following components of a motor vehicle: (A) the chassis or frame; (B) the body or unibody; (C) a support system damaged in a collision. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the auto body technician branch of the designated trade of auto body technician: (a) preparing a substrate for a finish or topcoat application; (b) applying a finish or topcoat to a substrate; (c) repairing the following components of a motor vehicle: (i) the chassis or frame; (ii) the body or unibody; (iii) a support system damaged in a collision; (d) using hand, power and auto body tools to perform the restricted activities set out in this section; (e) performing body damage analyses and prepare repair estimates; (f) welding and cutting metal sections; (g) attaching components by welding or using adhesives or fasteners; (h) straightening, measuring or aligning motor vehicle components; (i) performing paint damage analyses and preparing refinishing estimates; (j) recognizing substrate; (k) filling and sanding substrates; (l) managing paint and related materials and inventories; (m) protecting surfaces from the unintended application of a primer product, finish or topcoat; (n) removing and installing trim and glass; (o) mixing paint and primer products; (p) applying primer, primer‑surfacer, undercoating or corrosion protection material; (q) colour match paint; (r) applying a finish or topcoat; (s) polishing, washing and cleaning substrate. Classes of individuals 14 Only the following classes of individuals may perform a restricted activity within the auto body technician branch of the designated trade of auto body technician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Automotive Service Technician Restricted activities 15 (1) In this section, (a) “motor vehicle” means a vehicle that (i) is propelled by any power other than muscular power, (ii) is equipped with 2 or 3 axles, (iii) is not equipped with air brakes, (iv) may be registered to operate on a public highway, and (v) contains one or more vehicle systems and related components, but does not include a motorcycle as defined in section 91; (b) “undertakings of the designated trade” means the diagnosis of problems and the repair of motor vehicles, including all vehicle systems and related components; (c) “vehicle systems” includes the following: (i) vehicle propulsion systems; (ii) fuel systems; (iii) emission control systems; (iv) braking systems; (v) steering systems; (vi) suspension systems; (vii) drive train systems; (viii) vehicle management systems; (ix) electrical systems; (x) heating, ventilating and air conditioning systems; (xi) occupant restraint systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of automotive service technician: (a) diagnosing problems with motor vehicles, including vehicle systems and related components; (b) inspecting, testing, analyzing and repairing motor vehicles, including vehicle systems and utility trailers without air brakes; (c) heating and cutting with oxyfuel equipment; (d) operating and maintaining shop equipment and tools of the designated trade. Classes of individuals 16 Only the following classes of individuals may perform a restricted activity within the designated trade of automotive service technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing a restricted activity within the designated trade in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Baker Restricted activities 17 (1) In this section, (a) “baked goods” means breads, cakes, pies, pastries, cookies, doughnuts and specialty baked foods and includes any baked goods that are leavened mechanically, chemically or biologically; (b) “undertakings of the designated trade” means the preparation and the production of baked goods in commercial quantities for public consumption. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of baker: (a) sanitizing equipment and workspace; (b) applying computer knowledge, bookkeeping and trade terminology; (c) applying knowledge of the statutes and regulations pertaining to the food industry; (d) selecting, operating and maintaining tools and non‑mechanized equipment; (e) selecting, operating and maintaining mechanized and computerized equipment; (f) developing and applying production techniques respecting the following: (i) freezer technology; (ii) par‑baked products; (iii) pre‑mixes and bases; (g) preparing doughs and batters; (h) preparing creams, icings, fillings, toppings, desserts, confections and ice cream; (i) applying good management techniques; (j) scaling and mixing ingredients; (k) practising baking methods; (l) applying one’s knowledge with respect to the following: (i) properties of food; (ii) micro‑organisms associated with foods; (iii) causes, effect and control of food borne illnesses; (iv) nutrients; (m) product labelling, including listing known allergens. Classes of individuals 18 Only the following classes of individuals may perform a restricted activity within the designated trade of baker: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade;

(h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Boilermaker Restricted activities 19 (1) In this section, (a) “boilers, heat exchangers, pressure vessels and related equipment” means the following: (i) water tube boilers; (ii) fire tube boilers; (iii) heat exchangers; (iv) condensers; (v) distillation towers; (vi) stacks and stack liners; (vii) storage tanks; (viii) penstocks; (ix) furnaces; (x) dust, air, steam, liquid tight containers and other equipment not referred to in subclauses (i) to (ix); (xi) platforms, ladders, walkways, floors, roofs, support structures or other structures related to or used in respect of the items referred to in subclauses (i) to (x); (b) “undertakings of the designated trade” means the following: (i) the fabrication, assembly, erection, repair, maintenance, inspection, servicing, preparation and testing of boilers, heat exchangers, pressure vessels and related equipment; (ii) the stress relieving of vessels and ancillary equipment. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of boilermaker: (a) fabricating, assembling and erecting of boilers, heat exchangers, pressure vessels and related equipment; (b) repairing, maintaining, inspecting and servicing of boilers, heat exchangers, pressure vessels and related equipment; (c) preparing and testing of boilers, heat exchangers, pressure vessels and related equipment; (d) stress relieving of vessels and ancillary equipment; (e) using detailed drawings and other specifications; (f) using all related standards, codes and regulations; (g) using hand tools, power tools and shop equipment, including post drills, radial drills, angle rolls, plate rolls, punches, shears, brakes and presses; (h) using, setting up and assembling of rigging equipment, including wire rope, block and tackle, gin poles, cranes, derricks, hoisting and jacking equipment and scaffolds; (i) using cutting and arc tack welding equipment in heat straightening, cutting and joining metals; (j) using fiberglass‑reinforced plastics (i) in respect of air handling systems, including scrubbers, ducting, breeching and stacks, and (ii) in respect of tanks, hoppers and vessels; (k) using new technology related to the restricted activities set out in this section. Classes of individuals 20 Only the following classes of individuals may perform a restricted activity within the designated trade of boilermaker: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Bricklayer Restricted activities 21 (1) In this section, (a) “masonry” includes the following: (i) all types of bricks; (ii) all types of blocks; (iii) all types of stone, including cut and dressed stone; (iv) structural tiles; (v) precast concrete components; (vi) mortars; (vii) waterproofing and damp‑proofing materials; (viii) refractory systems and materials; (ix) prefabricated panels constructed of any materials referred to in subclauses (i) to (viii); (b) “undertakings of the designated trade” means the erection, installation, repair and maintenance of masonry. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of bricklayer: (a) erecting, installing, repairing and maintaining masonry; (b) using detailed drawings, blueprints and other specifications; (c) using hand tools, power tools, levels and explosive actuated tools; (d) using mixers, masonry saws and forklifts; (e) using various mortars, units and accessories for bonding; (f) using, setting up and assembling rigging and hoisting equipment, ladders and scaffolds; (g) using any new innovative technological changes in the designated trade that relate to materials or methods of construction; (h) laying masonry; (i) installing anchoring systems; (j) placing steel reinforcing and grouts in cavities or cores; (k) pointing and cleaning masonry; (l) lining or relining chimneys, ovens, boilers and other vessels; (m) lining or relining combustion chambers in fireplaces, furnaces and kilns; (n) installing and caulking precast concrete products and prefabricated masonry panels; (o) installing insulation, waterproofing and damp‑proofing materials and air‑vapour barriers. Classes of individuals 22 Only the following classes of individuals may perform a restricted activity within the designated trade of bricklayer: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Cabinetmaker Restricted activities 23 (1) In this section, (a) “millwork” means millwork of all types and includes the following: (i) joinery; (ii) framework; (iii) architectural fixture work, including the following: (A) stair work and balustrades; (B) special design doors and windows; (C) custom dining rooms, lounges and lobbies; (D) other similar work; (iv) custom millwork, including the following: (A) carcase units; (B) kitchen cabinets; (C) vanities, screens and planters; (D) shelf units; (E) other similar work; (v) custom furniture, including the following: (A) tables and chairs; (B) commercial furniture; (C) institutional furniture; (D) other similar work; (b) “undertakings of the designated trade” means the fabrication and installation of millwork. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of cabinetmaker: (a) fabricating and installing millwork; (b) setting up and operating woodworking machines and equipment; (c) making layouts and patterns; (d) cutting, shaping, moulding and assembling components of wood and wood substitutes in accordance with varying specifications; (e) using fasteners and adhesive; (f) using machines and equipment; (g) using laminating procedures; (h) using hardware; (i) building and installing doors, door frames and stairs; (j) interpreting blueprints; (k) developing production drawings using manual and computer‑aided design (CAD); (l) packaging and shipping millwork; (m) using manual and computer design and layout; (n) using and maintaining hand and portable power‑operated tools; (o) machining furniture and cabinet components; (p) bending and laminating cabinet and furniture components; (q) veneering, inlaying and applying laminated plastics; (r) sanding cabinets and furniture components; (s) fastening, clipping, glueing or otherwise applying non‑wood materials to millwork pieces; (t) performing sub‑assembly, final assembly and pre‑finishing of cabinets, furniture and millwork; (u) preparing and applying finishes; (v) installing millwork and cabinets on site; (w) remodeling and refinishing furniture; (x) using and programming computer numerical controlled (CNC) machines, computer‑aided design (CAD) and computer‑aided manufacturing (CAM) processes. Classes of individuals 24 Only the following classes of individuals may perform a restricted activity within the designated trade of cabinetmaker: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Carpenter Restricted activities 25 (1) In this section, (a) “building envelope system” means the components of a building that separate heated space from unheated space or that are in contact with the exterior air or the ground; (b) “concrete reinforcement materials” includes metal or steel strands, wires, bars, mesh or sheets; (c) “structure” includes any type of residential, commercial, industrial, institutional or agricultural structure; (d) “undertakings of the designated trade” means the construction, installation and repair of structures or components of structures made of wood, concrete or other materials; (e) “wood” includes any by‑product of wood, wood substitutes and similar materials. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of carpenter: (a) working with or making things with wood in the construction, installation or repair of structures or components of structures; (b) preparing site and building layouts; (c) constructing foundations and concrete structures; (d) framing structures; (e) applying interior and exterior finishes; (f) reviewing and interpreting construction drawings, plans, specifications, building codes and related documentation; (g) inspecting sub‑soil excavations of structures; (h) operating hand and power tools related to the designated trade; (i) shoring and underpinning of existing structures, parts of structures or excavations; (j) laying out and erecting batter boards, building lines and setting elevations; (k) installing, using and dismantling personnel handling devices, scaffolds, ropes, slings, hoists on rigging installations, ladders, shoring, covered walkways and barricades; (l) assembling, erecting, installing and dismantling structures; (m) setting up hoarding and other temporary structures; (n) framing the following: (i) exterior walls and interior partitions; (ii) architectural features; (iii) post and beam construction and timber framing; (iv) plank walls; (v) roof systems; (vi) blocking, nailers and firestops; (vii) ceiling and floor systems; (o) installing the following: (i) preserved wood foundations; (ii) sill plates on foundation walls; (iii) drainage tile and pipe; (iv) beams and columns; (v) floor frames; (vi) wood stairways and railings; (vii) metal stud non‑loadbearing walls; (viii) suspended ceiling systems; (ix) engineered pre‑fabricated roof systems; (x) roof coverings; (xi) exterior and interior doors and windows; (xii) insulation materials in ceilings, walls and floors; (xiii) air and vapour barriers; (xiv) caulking, adhesion and sealant materials; (xv) exterior wall finishes; (xvi) building envelope systems; (xvii) gypsum and non‑gypsum products on interior walls and ceilings; (xviii) interior cabinets, display cases, mirrors, counters, laminates, panelling, mouldings and trim; (xix) prefabricated fireplaces; (xx) exterior attachments to structures, including additions, porches, stoops and verandas; (xxi) timber bents to support ramps, platforms and heavy piping; (xxii) timber culverts; (p) placement of precast concrete panels; (q) building and stripping forms for the following: (i) beams and girders; (ii) piers and columns; (r) building forms, installing concrete reinforcement materials, placing and consolidating concrete and stripping forms for the following: (i) footings; (ii) walls; (iii) floors; (iv) sidewalks, driveways and curbs; (v) stairs; (vi) built‑in‑place concrete manholes, catch basins, utility vaults and other underground service boxes; (vii) tilt‑up precast concrete panels; (viii) void forms for grade or subterranean concrete. Classes of individuals 26 Only the following classes of individuals may perform a restricted activity within the designated trade of carpenter: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Communication Technician Restricted activities 27 (1) In this section, (a) “communication system” means any type of industrial, commercial or domestic electrical, fibre or wireless communication system and includes transmission equipment, switching equipment and network management control equipment for the following: (i) video; (ii) voice; (iii) data; (iv) signaling; (b) “undertakings of the designated trade” means the installation, repair, maintenance and upgrade of communication systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of communication technician: (a) installing, repairing, maintaining and upgrading communication systems; (b) using hand tools, power tools, testing equipment and tools required by the designated trade; (c) installing, terminating and testing copper and fibre optic cables in communication systems; (d) installing and laying out raceways and supporting framework for communication systems; (e) installing, troubleshooting, maintaining and commissioning equipment and apparatus used in communication systems; (f) interpreting and applying the provisions of the Safety Codes Act and the regulations under that Act; (g) interpreting communications systems drawings and prints. Classes of individuals 28 Only the following classes of individuals may perform a restricted activity within the designated trade of communication technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Concrete Finisher Restricted activities 29 (1) In this section, (a) “concrete” means cement products and includes the following: (i) cements; (ii) concrete; (iii) aggregate; (iv) grouts; (v) patching materials; (vi) toppings; (vii) admixtures; (viii) agents; (ix) epoxies; (x) protective coatings; (b) “undertakings of the designated trade” means the placing, finishing, restoring and repairing of concrete. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of concrete finisher: (a) placing of concrete; (b) handling of concrete; (c) finishing concrete; (d) restoring concrete; (e) repairing and resurfacing concrete; (f) applying curing treatments to concrete; (g) applying surface treatments to concrete; (h) consolidating and compacting concrete; (i) edging, jointing and grooving concrete; (j) producing various finishes on concrete surfaces; (k) applying treatments to concrete; (l) cutting and coring hardened concrete; (m) scarifying concrete; (n) applying dry, wet and epoxy grouts; (o) using detailed drawings, blueprints and other specifications; (p) using hand tools, power tools, levels and explosive actuated tools; (q) using mixers, wall sawing, floor sawing, grooving, coring and grinding equipment; (r) using power consolidating, power screeding and power trowelling equipment; (s) using, setting up and assembling rigging and hoisting equipment, ladders and scaffolds; (t) using any new innovative technological changes in the designated trade in relation to the restricted activities set out in this section. Classes of individuals 30 Only the following classes of individuals may perform a restricted activity within the designated trade of concrete finisher: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Cook Restricted activities 31 (1) In this section, “undertakings of the designated trade” means the preparation and the cooking of a variety of full course meals, including appetizers, starches, main courses, vegetables and desserts in commercial quantities for public consumption. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of cook: (a) maintaining personal hygiene and applying sanitation and safe food handling techniques; (b) operating and maintaining kitchen tools and equipment; (c) identifying and preparing different types of food; (d) maintaining and applying cooking principles and methods with respect to all aspects of cooking from basic cooking to advanced cooking; (e) cleaning, preparing and cooking vegetables, fruits and fungi; (f) preparing stocks, sauces and soups; (g) using seasonings, herbs and spices; (h) preparing egg and dairy products; (i) preparing and cooking starches, farinaceous foods and cereals; (j) preparing, cooking and dressing fish and seafood; (k) preparing and cooking meats, poultry, game and variety meats; (l) producing baked pastry and dessert products; (m) preparing cold foods and buffets; (n) preparing and cooking value‑added products; (o) applying nutritional values and meeting special dietary needs; (p) using cooking and chilling systems; (q) preparing, cooking and storing food items for preservation; (r) applying purchasing and management control; (s) applying management skills. Classes of individuals 32 Only the following classes of individuals may perform a restricted activity within the designated trade of cook: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual;

(l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Crane and Hoisting Equipment Operator — Boom Truck Operator Branch Restricted activities 33 (1) In this section, (a) “boom truck” means a crane consisting of a rotating superstructure operating machinery on a centre post or turntable that (i) has one or more operator stations mounted on a frame attached to a commercial truck chassis or trailer chassis, (ii) typically retains a payload hauling capacity and has a power source capable of powering the crane, and (iii) is equipped with (A) a boom that is capable of swinging, hoisting and booming up and down and that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (B) a telescoping boom that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (C) an articulating boom possessing live lines that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), or (D) an articulating boom without live lines that has a lifting capacity greater than 8 tons (7.3 tonnes) and equal to or less than 65 tons (59 tonnes); (b) “crane and hoisting equipment” means a mobile crane, a tower crane, a boom truck or a wellhead boom truck, but does not include (i) an overhead bridge‑type crane, (ii) a crane that is used exclusively for raising, lowering and towing motor vehicles, (iii) a crane that is mounted on a motor vehicle that is used exclusively for firefighting, (iv) a machine, commonly known as a side‑boom or pipe layer, that is used for pipeline work to lower pipes into a trench, (v) an aerial device that is commonly known as a personnel lift or personnel hoist, (vi) a mobile lifting device designed exclusively for use in power line and electric utility services, such as digger derricks and radial boom derricks used to auger holes and to set utility poles and place associated equipment, (vii) equipment designed exclusively to move earth, (viii) a crane that (A) is operated at a mine site, (B) is used with a special attachment to move earth or material, and (C) meets the requirements of and is operated in accordance with the Occupational Health and Safety Act and the regulations under that Act, (ix) an aerial material handling device with or without live lines, or (x) equipment designed exclusively for drilling or driving piles and casings; (c) “hydraulic mobile crane” means any device or structure that (i) incorporates a hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a telescoping boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater, and (v) may incorporate a ring assembly or a strand jacking system for hoisting; (d) “lattice boom mobile crane” means any device or structure that (i) incorporates a friction or hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a lattice boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, and (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater; (e) “lifting capacity” means the highest capacity at the shortest lifting radius, as defined by the load chart installed on the mobile crane, tower crane, boom truck or wellhead boom truck; (f) “mobile crane” means (i) a hydraulic mobile crane or a lattice boom mobile crane, and (ii) a boom truck or a wellhead boom truck that has a lifting capacity greater than 65 tons (59 tonnes); (g) “routine maintenance” means the maintenance activities recommended by the manufacturer for the crane or hoisting equipment in question; (h) “testing” means a procedure, used in the course of normal operation only, to determine that the crane or hoisting equipment in question is functioning, and does not include routine maintenance or repair activities; (i) “tower crane” means any mechanical device or structure that (i) is designed to incorporate a power driven drum and cable or rope and a vertical mast or tower and a jib, (ii) is of the travelling, fixed, climbing or self‑erecting type, and (iii) is used exclusively for raising, lowering or moving material; (j) “undertakings of the branch of the designated trade” means the operation, testing and routine maintenance of boom trucks and wellhead boom trucks but does not include the installation or repair of crane and hoisting equipment by persons other than the operators of crane and hoisting equipment; (k) “wellhead boom truck” means a boom truck that is used for one or more of the following: (i) wellhead pumping operations; (ii) wireline operations; (iii) perforating operations; (iv) coiled tubing operations; (v) snubbing operations; (vi) the rig up and rig out of slant service rigs. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the boom truck operator branch of the designated trade of crane and hoisting equipment operator: (a) operating, testing and performing routine maintenance of boom trucks or wellhead boom trucks; (b) using hand tools, power tools and specialized equipment while maintaining and operating boom trucks and related equipment; (c) recognizing and identifying malfunctions relating to boom trucks and related equipment or their operation and the proper procedures to be applied when recognizing and identifying such malfunctions; (d) recognizing and identifying conditions that are potentially hazardous to safe machine operation; (e) interpreting and applying visual and audio communications; (f) communicating with management, signallers and riggers using visual and audio systems; (g) inspecting and maintaining boom cranes and related equipment to determine that the crane or hoisting equipment in question is functioning, excluding routine maintenance or repair activities; (h) performing rigging related to the designated trade; (i) carrying out pre‑lift planning and pre‑lift tasks when preparing for lifts; (j) performing the restricted activities of the wellhead boom truck operator branch of the designated trade as set out in section 39. Classes of individuals 34 Only the following classes of individuals may perform a restricted activity within the boom truck operator branch of the designated trade of crane and hoisting equipment operator: (a) any individual who holds a trade certificate in any of the following: (i) the branch of the designated trade; (ii) the mobile crane operator branch of the designated trade; (iii) the boom truck craft of the designated trade issued before September 1, 2018; (iv) the conventional mobile crane craft of the designated trade issued before September 1, 2018; (v) the hydraulic mobile crane craft of the designated trade issued before September 1, 2018; (vi) the mobile crane branch of the designated trade issued before September 1, 2018; (b) subject to the original conditions set out in the identification card, any individual who, on September 1, 2018, held an identification card in respect of an approved training program under the Boom Truck Operator Exception Regulation (AR 87/2002); (c) any individual who holds an endorsement in the mobile crane operator branch of the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the mobile crane operator branch of the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the mobile crane operator branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the mobile crane operator branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (g) any individual who is registered in a student work training program in the branch of the designated trade or the mobile crane operator branch of the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the mobile crane operator branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Crane and Hoisting Equipment Operator — Mobile Crane Operator Branch Restricted activities 35 (1) In this section, (a) “boom truck” means a crane consisting of a rotating superstructure operating machinery on a centre post or turntable that (i) has one or more operator stations mounted on a frame attached to a commercial truck chassis or trailer chassis, (ii) typically retains a payload hauling capacity and has a power source capable of powering the crane, and (iii) is equipped with (A) a boom that is capable of swinging, hoisting and booming up and down and that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (B) a telescoping boom that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (C) an articulating boom possessing live lines that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), or (D) an articulating boom without live lines that has a lifting capacity greater than 8 tons (7.3 tonnes) and equal to or less than 65 tons (59 tonnes); (b) “crane and hoisting equipment” means a mobile crane, a tower crane, a boom truck or a wellhead boom truck, but does not include (i) an overhead bridge‑type crane, (ii) a crane that is used exclusively for raising, lowering and towing motor vehicles, (iii) a crane that is mounted on a motor vehicle that is used exclusively for firefighting, (iv) a machine, commonly known as a side‑boom or pipe layer, that is used for pipeline work to lower pipes into a trench, (v) an aerial device that is commonly known as a personnel lift or personnel hoist, (vi) a mobile lifting device designed exclusively for use in power line and electric utility services, such as digger derricks and radial boom derricks used to auger holes and to set utility poles and place associated equipment, (vii) equipment designed exclusively to move earth, (viii) a crane that (A) is operated at a mine site, (B) is used with a special attachment to move earth or material, and (C) meets the requirements of and is operated in accordance with the Occupational Health and Safety Act and the regulations under that Act, (ix) an aerial material handling device with or without live lines, or (x) equipment designed exclusively for drilling or driving piles and casings; (c) “hydraulic mobile crane” means any device or structure that (i) incorporates a hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a telescoping boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater, and (v) may incorporate a ring assembly or a strand jacking system for hoisting; (d) “lattice boom mobile crane” means any device or structure that (i) incorporates a friction or hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a lattice boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, and (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater; (e) “lifting capacity” means the highest capacity at the shortest lifting radius, as defined by the load chart installed on the mobile crane, tower crane, boom truck or wellhead boom truck; (f) “mobile crane” means (i) a hydraulic mobile crane or a lattice boom mobile crane, and (ii) a boom truck or a wellhead boom truck that has a lifting capacity greater than 65 tons (59 tonnes); (g) “routine maintenance” means the maintenance activities recommended by the manufacturer for the crane or hoisting equipment in question; (h) “testing” means a procedure, used in the course of normal operation only, to determine that the crane or hoisting equipment in question is functioning, and does not include routine maintenance or repair activities; (i) “tower crane” means any mechanical device or structure that (i) is designed to incorporate a power driven drum and cable or rope and a vertical mast or tower and a jib, (ii) is of the travelling, fixed, climbing or self‑erecting type, and (iii) is used exclusively for raising, lowering or moving material; (j) “undertakings of the branch of the designated trade” means the operation, testing and routine maintenance of mobile cranes, boom trucks and wellhead boom trucks but does not include the installation or repair of crane and hoisting equipment by persons other than the operators of crane and hoisting equipment; (k) “wellhead boom truck” means a boom truck that is used for one or more of the following: (i) wellhead pumping operations; (ii) wireline operations; (iii) perforating operations; (iv) coiled tubing operations; (v) snubbing operations; (vi) the rig up and rig out of slant service rigs. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the mobile crane operator branch of the designated trade of crane and hoisting equipment operator: (a) operating, testing and performing routine maintenance of mobile cranes, boom trucks, and wellhead boom trucks; (b) using hand tools, power tools and specialized equipment while maintaining and operating mobile cranes and related equipment; (c) recognizing and identifying malfunctions relating to mobile cranes and related equipment or their operation and the proper procedures to be applied when recognizing and identifying such malfunctions; (d) recognizing and identifying conditions that are potentially hazardous to safe machine operation; (e) interpreting and applying visual and audio communications; (f) communicating with management, signallers and riggers using visual and audio systems; (g) inspecting and maintaining mobile cranes and related equipment; (h) performing rigging related to the designated trade; (i) carrying out pre‑lift planning and pre‑lift tasks when preparing for lifts; (j) assembling mobile cranes and related equipment for lifts; (k) disassembling mobile cranes for transport; (l) performing the restricted activities of the boom truck operator branch of the designated trade as set out in section 33; (m) performing the restricted activities of the wellhead boom truck operator branch of the designated trade as set out in section 39. Classes of individuals 36 Only the following classes of individuals may perform a restricted activity within the mobile crane operator branch of the designated trade of crane and hoisting equipment operator: (a) any individual who holds a trade certificate in any of the following: (i) the branch of the designated trade; (ii) the conventional mobile crane craft of the designated trade issued before September 1, 2018; (iii) the hydraulic mobile crane craft of the designated trade issued before September 1, 2018; (iv) the mobile crane branch of the designated trade issued before September 1, 2018; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Crane and Hoisting Equipment Operator — Tower Crane Operator Branch Restricted activities 37 (1) In this section, (a) “boom truck” means a crane consisting of a rotating superstructure operating machinery on a centre post or turntable that (i) has one or more operator stations mounted on a frame attached to a commercial truck chassis or trailer chassis, (ii) typically retains a payload hauling capacity and has a power source capable of powering the crane, and (iii) is equipped with (A) a boom that is capable of swinging, hoisting and booming up and down and that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (B) a telescoping boom that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (C) an articulating boom possessing live lines that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), or (D) an articulating boom without live lines that has a lifting capacity greater than 8 tons (7.3 tonnes) and equal to or less than 65 tons (59 tonnes); (b) “crane and hoisting equipment” means a mobile crane, a tower crane, a boom truck or a wellhead boom truck, but does not include (i) an overhead bridge‑type crane, (ii) a crane that is used exclusively for raising, lowering and towing motor vehicles, (iii) a crane that is mounted on a motor vehicle that is used exclusively for firefighting, (iv) a machine, commonly known as a side‑boom or pipe layer, that is used for pipeline work to lower pipes into a trench, (v) an aerial device that is commonly known as a personnel lift or personnel hoist, (vi) a mobile lifting device designed exclusively for use in power line and electric utility services, such as digger derricks and radial boom derricks used to auger holes and to set utility poles and place associated equipment, (vii) equipment designed exclusively to move earth, (viii) a crane that (A) is operated at a mine site, (B) is used with a special attachment to move earth or material, and (C) meets the requirements of and is operated in accordance with the Occupational Health and Safety Act and the regulations under that Act, (ix) an aerial material handling device with or without live lines, or (x) equipment designed exclusively for drilling or driving piles and casings; (c) “hydraulic mobile crane” means any device or structure that (i) incorporates a hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a telescoping boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater, and (v) may incorporate a ring assembly or a strand jacking system for hoisting; (d) “lattice boom mobile crane” means any device or structure that (i) incorporates a friction or hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a lattice boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, and (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater; (e) “lifting capacity” means the highest capacity at the shortest lifting radius, as defined by the load chart installed on the mobile crane, tower crane, boom truck or wellhead boom truck; (f) “mobile crane” means (i) a hydraulic mobile crane or a lattice boom mobile crane, and (ii) a boom truck or a wellhead boom truck that has a lifting capacity greater than 65 tons (59 tonnes); (g) “routine maintenance” means the maintenance activities recommended by the manufacturer for the crane or hoisting equipment in question; (h) “testing” means a procedure, used in the course of normal operation only, to determine that the crane or hoisting equipment in question is functioning, and does not include routine maintenance or repair activities; (i) “tower crane” means any mechanical device or structure that (i) is designed to incorporate a power driven drum and cable or rope and a vertical mast or tower and a jib, (ii) is of the travelling, fixed, climbing or self‑erecting type, and (iii) is used exclusively for raising, lowering or moving material; (j) “undertakings of the branch of the designated trade” means the operation, testing and routine maintenance of tower cranes but does not include the installation or repair of crane and hoisting equipment by persons other than the operators of crane and hoisting equipment; (k) “wellhead boom truck” means a boom truck that is used for one or more of the following: (i) wellhead pumping operations; (ii) wireline operations; (iii) perforating operations; (iv) coiled tubing operations; (v) snubbing operations; (vi) the rig up and rig out of slant service rigs. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the tower crane operator branch of the designated trade of crane and hoisting equipment operator: (a) operating, testing and performing routine maintenance of tower cranes; (b) using hand tools, power tools and specialized equipment while maintaining and operating tower cranes and related equipment; (c) recognizing and identifying malfunctions relating to tower cranes and related equipment or their operation and the proper procedures to be applied when recognizing and identifying such malfunctions; (d) recognizing and identifying conditions that are potentially hazardous to safe machine operation; (e) interpreting and applying visual and audio communications; (f) communicating with management, signallers and riggers using visual and audio systems; (g) inspecting and maintaining tower cranes and related equipment to determine that the crane or hoisting equipment in question is functioning, excluding routine maintenance or repair activities; (h) performing rigging related to the designated trade; (i) carrying out pre‑lift planning and pre‑lift tasks when preparing for lifts; (j) assembling tower cranes and related equipment for lifts; (k) disassembling tower cranes for transport. Classes of individuals 38 Only the following classes of individuals may perform a restricted activity within the tower crane operator branch of the designated trade of crane and hoisting equipment operator: (a) any individual who holds a trade certificate in any of the following: (i) the branch of the designated trade; (ii) the boom truck craft of the designated trade issued before September 1, 2018; (iii) the conventional mobile crane craft of the designated trade issued before September 1, 2018; (iv) the hydraulic mobile crane craft of the designated trade issued before September 1, 2018; (v) the mobile crane branch of the designated trade issued before September 1, 2018; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Crane and Hoisting Equipment Operator — Wellhead Boom Truck Operator Branch Restricted activities 39 (1) In this section, (a) “boom truck” means a crane consisting of a rotating superstructure operating machinery on a centre post or turntable that (i) has one or more operator stations mounted on a frame attached to a commercial truck chassis or trailer chassis, (ii) typically retains a payload hauling capacity and has a power source capable of powering the crane, and (iii) is equipped with (A) a boom that is capable of swinging, hoisting and booming up and down and that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (B) a telescoping boom that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), (C) an articulating boom possessing live lines that has a lifting capacity greater than 5 tons (4.5 tonnes) and equal to or less than 65 tons (59 tonnes), or (D) an articulating boom without live lines that has a lifting capacity greater than 8 tons (7.3 tonnes) and equal to or less than 65 tons (59 tonnes); (b) “crane and hoisting equipment” means a mobile crane, a tower crane, a boom truck or a wellhead boom truck, but does not include (i) an overhead bridge‑type crane, (ii) a crane that is used exclusively for raising, lowering and towing motor vehicles, (iii) a crane that is mounted on a motor vehicle that is used exclusively for firefighting, (iv) a machine, commonly known as a side‑boom or pipe layer, that is used for pipeline work to lower pipes into a trench, (v) an aerial device that is commonly known as a personnel lift or personnel hoist, (vi) a mobile lifting device designed exclusively for use in power line and electric utility services, such as digger derricks and radial boom derricks used to auger holes and to set utility poles and place associated equipment, (vii) equipment designed exclusively to move earth, (viii) a crane that (A) is operated at a mine site, (B) is used with a special attachment to move earth or material, and (C) meets the requirements of and is operated in accordance with the Occupational Health and Safety Act and the regulations under that Act, (ix) an aerial material handling device with or without live lines, or (x) equipment designed exclusively for drilling or driving piles and casings; (c) “hydraulic mobile crane” means any device or structure that (i) incorporates a hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a telescoping boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater, and (v) may incorporate a ring assembly or a strand jacking system for hoisting; (d) “lattice boom mobile crane” means any device or structure that (i) incorporates a friction or hydraulic driven drum and cable or rope used for raising, lowering or moving material, (ii) is equipped with a lattice boom capable of moving in the vertical plane, (iii) is mounted on a pedestal, base or chassis, either crawler, trailer or wheel mounted, to provide mobility, and (iv) has a lifting capacity of 15 tons (13.6 tonnes) or greater; (e) “lifting capacity” means the highest capacity at the shortest lifting radius, as defined by the load chart installed on the mobile crane, tower crane, boom truck or wellhead boom truck; (f) “mobile crane” means (i) a hydraulic mobile crane or a lattice boom mobile crane, and (ii) a boom truck or a wellhead boom truck that has a lifting capacity greater than 65 tons (59 tonnes); (g) “routine maintenance” means the maintenance activities recommended by the manufacturer for the crane or hoisting equipment in question; (h) “testing” means a procedure, used in the course of normal operation only, to determine that the crane or hoisting equipment in question is functioning, and does not include routine maintenance or repair activities; (i) “tower crane” means any mechanical device or structure that (i) is designed to incorporate a power driven drum and cable or rope and a vertical mast or tower and a jib, (ii) is of the travelling, fixed, climbing or self‑erecting type, and (iii) is used exclusively for raising, lowering or moving material; (j) “undertakings of the branch of the designated trade” means the operation, testing and routine maintenance of wellhead boom trucks but does not include the installation or repair of crane and hoisting equipment by persons other than the operators of crane and hoisting equipment; (k) “wellhead boom truck” means a boom truck that is used for one or more of the following: (i) wellhead pumping operations; (ii) wireline operations; (iii) perforating operations; (iv) coiled tubing operations; (v) snubbing operations; (vi) the rig up and rig out of slant service rigs. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the wellhead boom truck operator branch of the designated trade of crane and hoisting equipment operator: (a) operating, testing and performing routine maintenance of wellhead boom trucks; (b) using hand tools, power tools and specialized equipment while maintaining wellhead boom trucks and related equipment; (c) recognizing and identifying malfunctions relating to wellhead boom trucks and related equipment and the proper procedures to be applied when recognizing and identifying such malfunctions; (d) recognizing and identifying conditions that are potentially hazardous to safe machine operation; (e) interpreting and applying visual and audio communications; (f) communicating with management, signallers and riggers using visual and audio systems; (g) inspecting and maintaining wellhead boom trucks and related equipment to determine that the crane or hoisting equipment in question is functioning, excluding routine maintenance or repair activities; (h) performing rigging related to the designated trade; (i) carrying out pre‑lift planning and pre‑lift tasks when preparing for lifts. Classes of individuals 40 Only the following classes of individuals may perform a restricted activity within the wellhead boom truck operator branch of the designated trade of crane and hoisting equipment operator: (a) any individual who holds a trade certificate in any of the following: (i) the branch of the designated trade; (ii) the boom truck operator branch of the designated trade; (iii) the mobile crane operator branch of the designated trade; (iv) the boom truck craft of the designated trade issued before September 1, 2018; (v) the conventional mobile crane craft of the designated trade issued before September 1, 2018; (vi) the hydraulic mobile crane craft of the designated trade issued before September 1, 2018; (vii) the mobile crane branch of the designated trade issued before September 1, 2018; (viii) the wellhead boom truck craft of the designated trade issued before September 1, 2018; (b) subject to the original conditions set out in the identification card, any individual who, on September 1, 2018, held an identification card in respect of an approved training program under the Boom Truck Operator Exception Regulation (AR 87/2002); (c) any individual who holds an endorsement in the mobile crane operator branch of the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the mobile crane operator branch or boom truck operator branch of the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the mobile crane operator branch or boom truck operator branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the mobile crane operator branch or boom truck operator branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (g) any individual who is registered in a student work training program in the branch of the designated trade or the mobile crane operator branch or boom truck operator branch of the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the mobile crane operator branch or boom truck operator branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ;

(m) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Electric Motor Systems Technician Restricted Activities 41 (1) In this section, (a) “electrical machines, systems and equipment” means the following: (i) electrical measuring devices; (ii) electrical machine components; (iii) all types of electro‑mechanical equipment whether or not it is (A) gear driven, (B) belt driven, or (C) direct coupled; (iv) electrical switching circuits; (v) electrical fans, blowers and pumps; (vi) transformers; (vii) single phase motors; (viii) magnetic switches and control circuits; (ix) phase converters; (x) three phase motors, starters and controllers; (xi) synchronous machines; (xii) industrial electronic controls; (xiii) electric welders; (xiv) eddy current clutches, couplings and brakes; (xv) inverter and vector drives; (xvi) static and dynamic balancing; (xvii) programmable controllers; (b) “undertakings of the designated trade” means the repair, installation, replacement, modification and testing of electrical machines, systems and equipment. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of electric motor systems technician: (a) installing electrical machines, systems and equipment; (b) repairing, replacing, modifying and testing of electrical machines, systems and equipment; (c) testing, repairing and reconditioning electric machines, motors and generators and AC and DC welders; (d) modifying motors, including windings, electrical connections and bearings; (e) rigging and hoisting related to the designated trade; (f) performing power measurement; (g) reconditioning and repairing motor‑generator sets; (h) reconditioning and repairing transformers; (i) reconditioning and repairing electrical control components; (j) manufacturing, testing and repairing electrical control panels; (k) disconnecting, servicing and reconnecting electrical fans, blowers, pumps or electrical devices from existing consumer power supplies; (l) examining, testing and lubricating mechanical components of motors and generators; (m) examining, testing and checking the operation of electrical components of motors, generators, transformers and control equipment; (n) determining the need, extent and type of repairs required and preparing reports for time and costs estimations; (o) examining, servicing and aligning or replacing couplings; (p) performing predictive and preventative maintenance services; (q) examining, servicing or replacing bearings, seals and gaskets; (r) repairing or replacing stators and motor windings in AC and DC motors and generators and welders; (s) repairing, replacing or reconditioning commutators and slip ring assemblies; (t) assembling and testing motors and generators for correct operation; (u) examining and testing controls and indicating instruments to determine the nature and extent of repairs required; (v) repairing or replacing control components and indicating instruments; (w) performing minor tune‑ups of gasoline engines used for generator and welder drives; (x) inspecting and testing to establish condition of transformers; (y) removing transformer cores and coils from transformer housings; (z) repairing damaged insulators and insulating material in respect of transformers; (aa) repairing and replacing coil connections in respect of transformers; (bb) removing and rewinding primary windings and installing primary windings; (cc) removing and rewinding secondary windings and installing secondary windings; (dd) repairing or replacing tap changing switches; (ee) checking and repairing transformer cores; (ff) repairing transformer housings; (gg) testing, removing and replacing transformer oil; (hh) assembling transformers and placing in transformer housings; (ii) inspecting and testing condition of control components, including relays, solenoids, contactors and similar components; (jj) dismantling, repairing and rewinding components and assembling and testing for correct operation; (kk) interpreting and evaluating customers’ requirements, drawings and specifications; (ll) preparing and laying out materials for and manufacturing and assembling enclosures and panels; (mm) determining locations of components and installing and wiring the components in enclosures and panels; (nn) testing control panels for correct operation according to drawings and specifications; (oo) inspecting control panels for damage and faulty components; (pp) repairing and verifying certification of electrical equipment and components used in hazardous locations; (qq) painting and refinishing electrical apparatus. Classes of individuals 42 Only the following classes of individuals may perform a restricted activity within the designated trade of electric motor systems technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual; (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Electrician — Construction Electrician Branch Restricted activities 43 (1) In this section, (a) “construction electrical system” means any type of residential, commercial, institutional or industrial building or structural electrical system and includes the following: (i) systems providing power; (ii) generation systems, including photovoltaic; (iii) distribution systems; (iv) electromechanical systems; (v) grounding and bonding systems; (vi) power conversion systems; (vii) measuring and metering systems; (viii) storage systems, including dry cell and storage batteries and storage battery systems; (ix) control systems; (x) lighting systems; (xi) heating, cooling and ventilation systems; (xii) communication, fibre optic and data systems; (xiii) fire alarm systems, including security systems, intrusion alarms, access control, card key lock systems or similar equipment; (xiv) signal systems; (xv) security systems; (xvi) protection systems; (xvii) cathodic systems; (xviii) all related electrical system equipment and electrical components related to construction electrical systems; (b) “external electrical circuit” means the components of an impressed current cathodic protection system that are down line of the rectifier; (c) “impressed current cathodic protection system” means a construction electrical system that reduces the corrosion of a metal surface by making the metal surface into the cathode of an electrochemical cell by means of direct current supplied by a power source; (d) “rectifier” means the component of an impressed current cathodic protection system that starts with the input terminal of the internal breaker and includes all wiring, connections and components up to and including the output terminals and the enclosure; (e) “undertakings of the designated trade” means the installation, alteration, repair, inspection, verification, commissioning, maintenance and operation of construction electrical systems. (2) When performed within undertakings of the branch of the designated trade, preparing, installing, altering, repairing, inspecting, verifying, commissioning, troubleshooting, maintaining, operating and energizing construction electrical systems are restricted activities within the construction electrician branch of the designated trade of electrician. (3) For greater certainty, the following activities are not restricted activities within the construction electrician branch of the designated trade of electrician: (a) installing, commissioning, monitoring, evaluating, maintaining, repairing and decommissioning the external electrical circuit portion of an impressed current cathodic protection system; (b) troubleshooting and replacing components of a rectifier that is not installed. Classes of individuals 44 (1) In this section, (a) “Canadian Electrical Code” means the CSA Standard C22.1, Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations declared in force, as amended or replaced from time to time, by the Electrical Code Regulation (AR 209/2006); (b) “disconnecting means” means a disconnecting means as defined in the Canadian Electrical Code; (c) “impressed current cathodic protection system” means a construction electrical system, as defined in section 43, that reduces the corrosion of a metal surface by making the metal surface into the cathode of an electrochemical cell by means of direct current supplied by a power source; (d) “installed” means a state of being physically connected to a power source; (e) “locked out and tagged out” means a state in which the power source has been securely de energized in accordance with industry practice; (f) “rectifier” means the component of an impressed current cathodic protection system that starts with the input terminal of the internal breaker and includes all wiring, connections and components up to and including the output terminals and the enclosure; (g) “VAC” means volts of alternating current. (2) Only the following classes of individuals may perform a restricted activity within the construction electrician branch of the designated trade of electrician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity; (m) any individual who is performing the following restricted activities in respect of the installation, commissioning, maintenance and repair on impressed current cathodic protection systems if the individual holds a trade certificate in the designated trade of cathodic protection technician: (i) with respect to a rectifier that is installed, (A) taking output readings and making output adjustments, (B) connecting and disconnecting the output terminations of the rectifier, (C) troubleshooting, (D) installing and removing current interrupters, (E) measuring input voltage (I) if the rectifier has a disconnecting means installed in compliance with the Canadian Electrical Code, up to a maximum of 600 VAC, and (II) in any other case, up to a maximum of 240 VAC, and (F) performing commissioning; (ii) with respect to a rectifier that is locked out and tagged out, replacing rectifier components and performing decommissioning checks. (3) For greater certainty, only the classes of individuals set out in subsection (2)(a) to (l) may install or uninstall the power source wiring to a rectifier. Electrician — Industrial Electrician Branch Restricted activities 44.1 (1) In this section, (a) “external electrical circuit” means the components of an impressed current cathodic protection system that are down line of the rectifier; (b) “impressed current cathodic protection system” means an industrial electrical system that reduces the corrosion of a metal surface by making the metal surface into the cathode of an electrochemical cell by means of direct current supplied by a power source; (c) “industrial electrical system” means any type of industrial building or structural electrical system and includes the following: (i) systems providing power; (ii) generation systems, including photovoltaic; (iii) distribution systems; (iv) electromechanical systems; (v) grounding and bonding systems; (vi) power conversion systems; (vii) measuring and metering systems; (viii) storage systems, including dry cell and storage batteries and storage battery systems; (ix) control systems; (x) lighting systems; (xi) heating, cooling and ventilation systems; (xii) communication, fibre optic and data systems; (xiii) fire alarm systems, including security systems, intrusion alarms, access control, card key lock systems or similar equipment; (xiv) signal systems; (xv) security systems; (xvi) protection systems; (xvii) cathodic systems; (xviii) all related electrical system equipment and electrical components related to industrial electrical systems; (d) “rectifier” means the component of an impressed current cathodic protection system that starts with the input terminal of the internal breaker and includes all wiring, connections and components up to and including the output terminals and the enclosure; (e) “undertakings of the branch of the designated trade” means the installation, alteration, repair, inspection, verification, commissioning, maintenance and operation of industrial electrical systems. (2) When performed within undertakings of the branch of the designated trade, preparing, installing, altering, repairing, inspecting, verifying, commissioning, troubleshooting, maintaining, operating and energizing industrial electrical systems are restricted activities within the industrial electrician branch of the designated trade of electrician. (3) For greater certainty, the following activities are not restricted activities within the industrial electrician branch of the designated trade of electrician: (a) installing, commissioning, monitoring, evaluating, maintaining, repairing and decommissioning the external electrical circuit portion of an impressed current cathodic protection system; (b) troubleshooting and replacing components of a rectifier that is not installed. Classes of individuals 44.2 (1) In this section, (a) “Canadian Electrical Code” means the CSA Standard C22.1, Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations declared in force, as amended or replaced from time to time, by the Electrical Code Regulation (AR 209/2006); (b) “disconnecting means” means a disconnecting means as defined in the Canadian Electrical Code; (c) “impressed current cathodic protection system” means an industrial electrical system, as defined in section 44.1, that reduces the corrosion of a metal surface by making the metal surface into the cathode of an electrochemical cell by means of direct current supplied by a power source; (d) “installed” means a state of being physically connected to a power source; (e) “locked out and tagged out” means a state in which the power source has been securely de‑energized in accordance with industry practice; (f) “rectifier” means the component of an impressed current cathodic protection system that starts with the input terminal of the internal breaker and includes all wiring, connections and components up to and including the output terminals and the enclosure; (g) “VAC” means volts of alternating current. (2) Only the following classes of individuals may perform a restricted activity within the industrial electrician branch of the designated trade of electrician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity; (m) any individual who is performing the following restricted activities in respect of the installation, commissioning, maintenance and repair on impressed current cathodic protection systems if the individual holds a trade certificate in the designated trade of cathodic protection technician: (i) with respect to a rectifier that is installed, (A) taking output readings and making output adjustments, (B) connecting and disconnecting the output terminations of the rectifier, (C) troubleshooting, (D) installing and removing current interrupters, (E) measuring input voltage (I) if the rectifier has a disconnecting means installed in compliance with the Canadian Electrical Code, up to a maximum of 600 VAC, and (II) in any other case, up to a maximum of 240 VAC, and (F) performing commissioning; (ii) with respect to a rectifier that is locked out and tagged out, replacing rectifier components and performing decommissioning checks. (3) For greater certainty, only the classes of individuals set out in subsection (2)(a) to (l) may install or uninstall the power source wiring to a rectifier. Elevator Constructor Restricted activities 45 (1) In this section, (a) “elevator system” includes the following: (i) electric elevators; (ii) hydraulic elevators; (iii) escalators; (iv) workers’ passenger hoists or lifts; (v) dumbwaiters; (vi) hand operated elevators; (vii) parking garage elevators; (viii) moving walkways; (ix) stagelifts; (x) lifts for persons with physical disabilities; (xi) residential elevators; (xii) elevator entrances; (xiii) elevator doors and door operating equipment; (xiv) electrical wiring and conduits from controllers to (A) signals, (B) operating circuits, and (C) remote panels or signals; (xv) fireman service; (xvi) signal, lighting and control systems; (xvii) piping relative to hydraulic elevators; (b) “undertakings of the designated trade” means the following: (i) the installation, removal, alteration, repair, modification and maintenance of elevator systems and (A) motors, drives and motor controllers, and (B) emergency power systems and security systems associated with elevator systems; (ii) the operation of temporary and incomplete elevator systems; (iii) the testing of elevator systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of elevator constructor: (a) installing, removing, altering, repairing, modifying and maintaining elevator systems and (i) motors, drives and motor controllers, and (ii) emergency power systems and security systems associated with elevator systems; (b) operating temporary and incomplete elevator systems; (c) testing elevator systems; (d) using hand tools, power tools, testing equipment and specialty tools required by the designated trade; (e) applying elevator, electrical and mechanical theory to the carrying out of the restricted activities set out in this section; (f) drawing, pulling, terminating and testing of conductors or cables into controller or panel systems pertaining to elevators or escalators; (g) installing and laying out hoistways, raceways, conduits, cable trays or troughs, wireways and fittings in elevator systems; (h) installing, troubleshooting, testing and laying out controllers and remote panels in elevator systems; (i) interpreting electrical and mechanical drawings and prints; (j) interpreting safety codes for elevators, escalators, dumbwaiters, moving walks and freight platform lifts; (k) coordinating elevator work with other construction trades; (l) installing all rail guides, beams, sheaves, templates, overhead work and all material used for mounting elevator systems in the machine room or below the machine room; (m) installing scaffolding for the erection of elevator systems; (n) installing and assembling elevator cabs and panels; (o) welding, drilling and rigging; (p) handling and hoisting elevator and escalator material. Classes of individuals 46 Only the following classes of individuals may perform a restricted activity within the designated trade of elevator constructor: (a) any individual who holds a trade certificate in the designated trade; (b) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (c) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate in the designated trade; (d) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who is registered in a student work training program in the designated trade; (f) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (h) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (i) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (j) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (k) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Floorcovering Installer Restricted activities 47 (1) In this section, (a) “floorcovering” means resilient floorcoverings, carpets and cushion and other types of underlayments and includes the following: (i) linoleum; (ii) inlaid sheet vinyls; (iii) roto vinyls; (iv) tiles; (v) solid polyvinyl chloride; (vi) prefinished hardwood flooring; (vii) laminate flooring; (viii) accessories used in respect of floorcoverings; (b) “undertakings of the designated trade” means the preparation of floors and the lay out, fitting, installation, service, maintenance and repair of floorcoverings and accessories. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of floorcovering installer: (a) preparing of floors; (b) laying out, fitting and installing floorcoverings and accessories; (c) servicing, maintaining and repairing floorcoverings and accessories; (d) using detailed drawings, blueprints and other specifications; (e) using hand tools and power tools to perform the restricted activities set out in this section; (f) using shop equipment, including air tools, floor grinders, sanders, polishers, table saws, miter saws, power stretchers and explosive actuated tools; (g) conducting moisture tests; (h) using any new innovative technological changes in the designated trade that relate to materials or methods of construction. Classes of individuals 48 Only the following classes of individuals may perform a restricted activity within the designated trade of floorcovering installer: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Gasfitter — Gasfitter (Class A) Branch Restricted activities 49 (1) In this section, (a) “A gas system” means any kind of residential, commercial or industrial gas system, including any gas appliance regardless of the BTU rating of the gas appliance, and the associated piping, fittings, air supply and venting, and includes the following: (i) low and high pressure natural gas supply systems; (ii) low and high pressure propane gas supply systems; (iii) gas fired appliances and equipment; (iv) natural draft ventilation systems; (v) power assisted ventilation systems; (vi) propane and natural gas dispensing systems; (vii) propane bulk storage systems; (b) “B gas system” means any kind of residential, commercial or industrial gas system, including any gas appliance that does not exceed a rating of 400 000 BTUs, and the associated piping, fittings, air supply and venting, and includes the following: (i) low and high pressure natural gas supply systems; (ii) low and high pressure propane gas supply systems; (iii) gas fired appliances and equipment; (iv) natural draft ventilation systems; (v) power assisted ventilation systems; (vi) propane and natural gas dispensing systems; (vii) propane bulk storage systems; (c) “undertakings of the branch of the designated trade” means the fabrication, installation, alteration, adjustment, maintenance, repair and replacement of A gas systems and B gas systems. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the gasfitter (class A) branch of the designated trade of gasfitter: (a) fabricating and installing A and B gas systems; (b) altering, adjusting and maintaining A and B gas systems; (c) repairing and replacing A and B gas systems; (d) determining, from prints and specifications, matters concerning location, size and material required in respect of A and B gas systems; (e) compiling material breakdown and takeoff; (f) identifying and using tools and special equipment that are used to carry out restricted activities in the designated trade; (g) applying codes to installation and maintenance requirements; (h) rigging equipment and piping components; (i) installing and maintaining appliances, controls, equipment, piping and hangers; (j) examining and testing gas systems. Classes of individuals 50 Only the following classes of individuals may perform a restricted activity within the gasfitter (class A) branch of the designated trade of gasfitter: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual;

(k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Gasfitter — Gasfitter (Class B) Branch Restricted activities 51 (1) In this section, (a) “B gas system” means any kind of residential, commercial or industrial gas system, including any gas appliance that does not exceed a rating of 400 000 BTUs, and the associated piping, fittings, air supply and venting, and includes the following: (i) low and high pressure natural gas supply systems; (ii) low and high pressure propane gas supply systems; (iii) gas fired appliances and equipment; (iv) natural draft ventilation systems; (v) power assisted ventilation systems; (vi) propane and natural gas dispensing systems; (vii) propane bulk storage systems; (b) “undertakings of the branch of the designated trade” means the fabrication, installation, alteration, adjustment, maintenance, repair and replacement of B gas systems. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the gasfitter (class B) branch of the designated trade of gasfitter: (a) fabricating and installing B gas systems; (b) altering, adjusting and maintaining B gas systems; (c) repairing and replacing B gas systems; (d) determining, from prints and specifications, matters concerning location, size and material required in respect of B gas systems; (e) coupling material breakdown and takeoff; (f) identifying and using tools and special equipment that are used to carry out restricted activities in the designated trade; (g) applying codes to installation and maintenance requirements; (h) rigging equipment and piping components; (i) installing and maintaining appliances, controls, equipment, piping and hangers; (j) examining and testing gas systems. Classes of individuals 52 Only the following classes of individuals may perform a restricted activity within the gasfitter (class B) branch of the designated trade of gasfitter: (a) any individual who holds a trade certificate in the branch of the designated trade or the gasfitter (class A) branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade or the gasfitter (class A) branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade, the gasfitter (class A) branch of the designated trade, the designated trade of plumber or the designated trade of sheet metal worker; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the gasfitter (class A) branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade, the gasfitter (class A) branch of the designated trade, the designated trade of plumber or the designated trade of sheet metal worker if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade, the gasfitter (class A) branch of the designated trade, the designated trade of plumber or the designated trade of sheet metal worker; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the gasfitter (class A) branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Glazier Restricted activities 53 (1) In this section, (a) “glass” means any type of commercial, residential, decorative or auto glass or related material and includes (i) curtain walls, (ii) skylites and sloped glazing, (iii) frames and doors, (iv) automatic doors, (v) manual doors, and (vi) mirrors; (b) “undertakings of the designated trade” means the following: (i) the glazing, setting, attachment, installation and removal of all types of glass on buildings, fixtures and other uses; (ii) the installation, fitting, fabrication and attachment of architectural metals or related products for all types of buildings; (iii) the cutting, preparation, fabrication or any other handling of glass for buildings, fixtures and other uses. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of glazier: (a) diagnosing problems and making repairs related to glazing; (b) carrying out damaged lite removal procedures and installing and sealing new components; (c) storing and handling glass; (d) preparing and fabricating glass to specifications; (e) selecting, cutting and fitting glass; (f) cutting, etching and installing mirrors; (g) installing glass into window frames; (h) installing and renovating residential windows, tub enclosures, shower doors and related products; (i) interpreting drawings and specifications; (j) preparing, fabricating, installing and maintaining aluminum and glass doors, windows, storefronts, screens and associated hardware; (k) fabricating and installing curtain walls; (l) fabricating and installing skylites, sloped glazing, barrel vaults, solariums and other support structures; (m) preparing and installing building envelope materials and sealants; (n) installing structural glass, balustrades, handrails and smoke baffles; (o) installing and maintaining automatic and revolving doors; (p) operating hand and power operated equipment that is used in the designated trade. Classes of individuals 54 Only the following classes of individuals may perform a restricted activity within the designated trade of glazier: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Hairstylist — Barber Branch Restricted activities 55 (1) In this section, (a) “hair” means the hair on a human head and includes (i) beards, (ii) mustaches, (iii) wigs, and (iv) hairpieces; (b) “undertakings of the branch of the designated trade” means the cutting, shaving and trimming of hair. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the barber branch of the designated trade of hairstylist: (a) cutting, shaving and trimming of hair; (b) using hand and power‑operated equipment in respect of hair; (c) testing and analyzing the hair and scalp for treatment; (d) using hand manipulation in respect of scalp treatments. Classes of individuals 56 Only the following classes of individuals may perform a restricted activity within the barber branch of the designated trade of hairstylist: (a) any individual who holds a trade certificate in the branch of the designated trade or the hairstylist branch of the designated trade; (b) any individual who holds an endorsement in the hairstylist branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the hairstylist branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the hairstylist branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the hairstylist branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the hairstylist branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the hairstylist branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Hairstylist — Hairstylist Branch Restricted activities 57 (1) In this section, (a) “hair” means the hair on a human head and includes (i) beards, (ii) mustaches, (iii) wigs, and (iv) hairpieces; (b) “undertakings of the branch of the designated trade” means the following: (i) the cutting, shaving and trimming of hair; (ii) the waving, curling and straightening of hair; (iii) altering the natural colour of hair; (iv) the styling of hair; (v) facial and scalp treatment and massage; (vi) the servicing of wigs and hairpieces. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the hairstylist branch of the designated trade of hairstylist: (a) cutting, shaving and trimming of hair; (b) waving, curling and straightening of hair; (c) altering the natural colour of hair; (d) styling of hair; (e) performing facial and scalp treatment and massage; (f) servicing of wigs and hairpieces; (g) using hand and power‑operated equipment in respect of hair; (h) using rinses, tints, bleaches, heat and chemicals in respect of hair; (i) testing and analyzing the hair and scalp for treatment; (j) using hand manipulation in respect of scalp treatments; (k) repealed AR 121/2023 s14. Classes of individuals 58 Only the following classes of individuals may perform a restricted activity within the hairstylist branch of the designated trade of hairstylist: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2) (c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Heavy Equipment Technician — Heavy Duty Equipment Mechanic (Off Road) Branch Restricted activities 59 (1) In this section, (a) “off‑road equipment” means industrial vehicles, engines, equipment and attachments; (b) “on‑road equipment” means on‑highway truck and transport vehicles designed primarily for commercial use or for hauling bulk goods; (c) “transport trailer” means a commercial transport device connected to or moved by on‑road or off‑road equipment and does not include (i) transport trailer bodies, or (ii) mobile refrigeration and heating equipment as defined in section 123; (d) “undertakings of the branch of the designated trade” means the maintenance, component replacement, diagnosis and repair of off-road equipment and transport trailers. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the heavy duty equipment mechanic (off road) branch of the designated trade of heavy equipment technician: (a) maintaining, replacing components, diagnosing problems and repairing off‑road equipment and transport trailers; (b) selecting, inspecting, using and maintaining various shop equipment and tools; (c) retrieving and inputting applicable information using service‑related computer software programs; (d) inspecting, maintaining, diagnosing and repairing internal combustion engines and engine auxiliary systems and accessories; (e) inspecting, maintaining, diagnosing and repairing power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives and steering clutches and axles; (f) inspecting, maintaining, diagnosing and repairing electrical system components and circuits; (g) inspecting, maintaining, diagnosing and repairing hydraulic and hydrostatic systems and components; (h) inspecting, maintaining, diagnosing and repairing air systems and components; (i) inspecting, maintaining, diagnosing and repairing steering, braking and suspension systems and components; (j) inspecting, maintaining, diagnosing and repairing frames, chassis, supporting structures, wheels, undercarriages, cabs and accessories, heating and air conditioning systems, canopies and protective structures; (k) inspecting, maintaining, diagnosing and repairing attachments, ground engaging and working tools, booms, structural members, cables, hooks and slings; (l) with respect to preventive maintenance, operational safety and equipment economy, (i) identifying and evaluating equipment failures and malfunctions relating to machine maintenance, (ii) identifying unsafe operating practices, and (iii) communicating (A) advice on maintenance to be performed, (B) maintenance safety precautions, (C) correct procedures for equipment inspections, operation, towing, loading, hauling, parking and storage, and (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. Classes of individuals 60 Only the following classes of individuals may perform a restricted activity within the heavy duty equipment mechanic (off road) branch of the designated trade of heavy equipment technician: (a) any individual who holds a trade certificate in the branch of the designated trade or the heavy equipment technician branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the heavy equipment technician branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the heavy equipment technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the heavy equipment technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the heavy equipment technician branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the heavy equipment technician branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Heavy Equipment Technician — Heavy Equipment Technician Branch Restricted activities 61 (1) In this section, (a) “off‑road equipment” means industrial vehicles, engines, equipment and attachments; (b) “on‑road equipment” means on‑highway truck and transport vehicles designed primarily for commercial use or for hauling bulk goods; (c) “transport trailer” means a commercial transport device connected to or moved by on‑road or off‑road equipment and does not include (i) transport trailer bodies, or (ii) mobile refrigeration and heating equipment as defined in section 123; (d) “undertakings of the branch of the designated trade” means the maintenance, component replacement, diagnosis and repair of off-road equipment, on-road equipment and transport trailers. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the heavy equipment technician branch of the designated trade of heavy equipment technician: (a) maintaining, diagnosing problems and repairing off‑road equipment, on‑road equipment and transport trailers; (b) replacing components on off‑road equipment, on‑road equipment and transport trailers; (c) selecting, inspecting, using and maintaining various shop equipment and tools; (d) retrieving and inputting applicable information using service‑related computer software programs; (e) inspecting, maintaining, diagnosing and repairing internal combustion engines and engine auxiliary systems and accessories; (f) inspecting, maintaining, diagnosing and repairing power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives and steering clutches and axles; (g) inspecting, maintaining, diagnosing and repairing electrical system components and circuits; (h) inspecting, maintaining, diagnosing and repairing hydraulic and hydrostatic systems and components; (i) inspecting, maintaining, diagnosing and repairing air systems and components; (j) inspecting, maintaining, diagnosing and repairing steering, braking and suspension systems and components; (k) inspecting, maintaining, diagnosing and repairing frames, chassis, supporting structures, wheels, undercarriages, cabs and accessories, heating and air conditioning systems, canopies and protective structures; (l) inspecting, maintaining, diagnosing and repairing attachments, ground engaging and working tools, booms, structural members, cables, hooks and slings; (m) with respect to preventive maintenance, operational safety and equipment economy, (i) identifying and evaluating equipment failures and malfunctions relating to machine maintenance, (ii) identifying unsafe operating practices, and (iii) communicating (A) advice on maintenance to be performed, (B) maintenance safety precautions, (C) correct procedures for equipment inspections, operation, towing, loading, hauling, parking and storage, and (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. Classes of individuals 62 Only the following classes of individuals may perform a restricted activity within the heavy equipment technician branch of the designated trade of heavy equipment technician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (c) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (d) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (e) any individual who is registered in a student work training program in the branch of the designated trade; (f) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (g) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (h) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (i) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (j) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (k) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Heavy Equipment Technician — Transport Trailer Mechanic Branch Restricted activities 63 (1) In this section, (a) “off‑road equipment” means industrial vehicles, engines, equipment and attachments; (b) “on‑road equipment” means on‑highway truck and transport vehicles designed primarily for commercial use or for hauling bulk goods; (c) “transport trailer” means a commercial transport device connected to or moved by on‑road or off‑road equipment and does not include (i) transport trailer bodies, or (ii) mobile refrigeration and heating equipment as defined in section 123; (d) “undertakings of the branch of the designated trade” means the maintenance, component replacement, diagnosis and repair of transport trailers. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the transport trailer mechanic branch of the designated trade of heavy equipment technician: (a) maintaining, diagnosing problems and repairing transport trailers; (b) replacing components on transport trailers; (c) retrieving and inputting applicable information using service‑related computer software programs; (d) inspecting, maintaining, diagnosing and repairing (i) suspensions, undercarriages and frames, (ii) braking systems, (iii) trailer couplers and hitches, (iv) landing gear, (v) electrical systems, and (vi) hydraulic systems. Classes of individuals 64 Only the following classes of individuals may perform a restricted activity within the transport trailer mechanic branch of the designated trade of heavy equipment technician: (a) any individual who holds a trade certificate in any branch of the designated trade; (b) any individual who holds an endorsement in the truck and transport mechanic branch or the heavy duty equipment mechanic (off road) branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in any branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in any branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in any branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in any branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in any branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity.

Heavy Equipment Technician — Truck and Transport Mechanic Branch Restricted activities 65 (1) In this section, (a) “off‑road equipment” means industrial vehicles, engines, equipment and attachments; (b) “on‑road equipment” means on‑highway truck and transport vehicles designed primarily for commercial use or for hauling bulk goods; (c) “transport trailer” means a commercial transport device connected to or moved by on‑road or off‑road equipment and does not include (i) transport trailer bodies, or (ii) mobile refrigeration and heating equipment as defined in section 123; (d) “undertakings of the branch of the designated trade” means the maintenance, component replacement, diagnosis and repair of on-road equipment and transport trailers. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the truck and transport mechanic branch of the designated trade of heavy equipment technician: (a) maintaining, diagnosing problems and repairing on‑road equipment and transport trailers; (b) replacing components on‑road equipment and transport trailers; (c) selecting, inspecting, using and maintaining various shop equipment and tools; (d) retrieving and inputting applicable information using service‑related computer software programs; (e) inspecting, maintaining, diagnosing and repairing internal combustion engines and engine auxiliary systems and accessories; (f) inspecting, maintaining, diagnosing and repairing power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives and steering clutches and axles; (g) inspecting, maintaining, diagnosing and repairing electrical system components and circuits; (h) inspecting, maintaining, diagnosing and repairing hydraulic systems and components; (i) inspecting, maintaining, diagnosing and repairing air systems and components; (j) inspecting, maintaining, diagnosing and repairing steering, braking and suspension systems and components; (k) inspecting, maintaining, diagnosing and repairing frames, chassis, supporting structures and components; (l) inspecting, maintaining, diagnosing and repairing attachments and working tools, structural members, cables, hooks and slings; (m) with respect to preventive maintenance, operational safety and equipment economy, (i) identifying and evaluating equipment failures and malfunctions relating to machine maintenance, (ii) identifying unsafe operating practices, and (iii) communicating (A) advice on maintenance to be performed, (B) maintenance safety precautions, (C) correct procedures for equipment inspections, operation, towing, loading, hauling, parking and storage, and (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. Classes of individuals 66 Only the following classes of individuals may perform a restricted activity within the truck and transport mechanic branch of the designated trade of heavy equipment technician: (a) any individual who holds a trade certificate in the branch of the designated trade or the heavy equipment technician branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the heavy equipment technician branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the heavy equipment technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the heavy equipment technician branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the heavy equipment technician branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the heavy equipment technician branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Industrial Mechanic (Millwright) Restricted activities 67 (1) In this section, (a) “stationary rotating equipment” means any type of plant, industrial machinery or mechanical equipment and includes the following: (i) stationary and industrial engines; (ii) steam and gas turbines; (iii) pumps; (iv) heat exchangers; (v) conveyor systems; (vi) gears and speed changers; (vii) mining equipment; (viii) logging equipment; (ix) compressors; (x) fluid power systems; (xi) air blowers and vacuum pumps and fans; (xii) gas and air dryers; (xiii) refrigeration; (xiv) power transmissions; (xv) couplings and clutches; (xvi) prime movers; (b) “undertakings of the designated trade” means the following: (i) the installation, maintenance, repair, removal and replacement of stationary rotating equipment; (ii) the diagnosis of problems relating to stationary rotating equipment. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of industrial mechanic (millwright): (a) installing, maintaining, repairing, removing and replacing stationary rotating equipment; (b) dismantling, assembling and repairing parts and components in stationary rotating equipment; (c) removing and installing electric motors, excluding the electrical disconnecting or hookup of electric motors; (d) diagnosing problems relating to stationary rotating equipment; (e) fitting, aligning and testing parts and components in stationary rotating equipment; (f) condition monitoring, vibration analysis and laser alignment of stationary rotating equipment; (g) fitting bearings, aligning gears and shafts, attaching motors and connecting couplings and belts in relation to stationary rotating equipment; (h) using hand, power and other tools of the designated trade while working on stationary rotating equipment; (i) interpreting drawings and plans and laying out and developing projects according to specifications; (j) using precision instruments to measure, assemble and fit complex plant or industrial machinery or other related equipment; (k) setting up and operating standard machine tools, including saws, drill presses, lathes and milling machines, and their attachments, to facilitate the efficient completion of the assembly and repair of stationary rotating equipment; (l) using measuring and testing instruments and devices in relation to stationary rotating equipment; (m) using rigging equipment in relation to stationary rotating equipment; (n) heating and cutting with oxyfuel equipment; (o) tack welding with welding equipment. Classes of individuals 68 Only the following classes of individuals may perform a restricted activity within the designated trade of industrial mechanic (millwright): (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Instrumentation and Control Technician Restricted activities 69 (1) In this section, (a) “instrument” means any type of industrial, commercial or domestic instrumentation and includes the following: (i) temperature, pressure, flow, analytical and level indicators, recorders, controllers and sensors; (ii) density indicators and sensors; (iii) weight indicators and sensors; (iv) viscosity and consistency indicators and sensors; (v) pH indicators and sensors; (vi) oxidation reduction potential indicators and sensors; (vii) oxygen analysis equipment; (viii) gas analyzers; (ix) turbidity and smoke density analyzers; (x) moisture and humidity sensing and indicating systems; (xi) electrical conductivity sensing and indicating systems; (xii) sensors and indicators for measurement of speed, position, proximity and time; (xiii) gas and liquid chromatographs; (xiv) spectrophotometer analyzers; (xv) spectrometers; (xvi) pneumatic, fluidic, robotic, fibre‑optic, hydraulic and electronic control devices and systems; (xvii) pneumatic, fluidic, robotic, fibre‑optic, hydraulic and electronic transmitters; (xviii) pneumatic, fluidic, robotic, fibre‑optic, hydraulic and electronic transducers; (xix) pneumatic, fluidic, robotic, fibre‑optic, hydraulic and electronic recorders; (xx) digital to analog and analog to digital converters; (xxi) data acquisition systems, telemetric systems, supervisory control and data acquisition (SCADA) systems, programmable logic controller systems and distributed control and display systems; (xxii) monitoring devices and alarm systems; (xxiii) valve positioners; (xxiv) electrical and pneumatic valve actuators; (xxv) control valves and final control elements; (xxvi) vibration sensing systems; (xxvii) ultra‑violet and infra‑red fire detection systems; (b) “undertakings of the designated trade” means the installation, calibration, testing and maintenance of instruments. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of instrumentation and control technician: (a) installing, calibrating, testing and maintaining the following: (i) process measurement sensing and indicating systems; (ii) analytical instrumentation; (iii) signal conversion and transmission devices; (iv) data acquisition and display systems; (v) monitoring devices and alarm systems; (vi) control devices and systems; (vii) final control elements; (b) installing, servicing, calibrating and maintaining equipment for calibration, reference or comparison standards; (c) installing, inspecting, testing, disconnecting and connecting electrical wiring to instrument installations; (d) maintaining, installing and testing air distribution systems; (e) installing, inspecting, testing, servicing and removing instruments; (f) installing and removing pneumatic tubing, process tubing and piping; (g) using hand tools, power tools, testing equipment and specialty tools required by the designated trade; (h) incorporating modifications to systems and components; (i) applying knowledge and understanding of operating processes and their interrelationship with instrumentation. Classes of individuals 70 Only the following classes of individuals may perform a restricted activity within the designated trade of instrumentation and control technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Insulator (Heat and Frost) Restricted activities 71 (1) In this section, (a) “insulation items” means the following: (i) insulation materials, reinforcing fabrics, metal lath and hexagonal wire; (ii) adhesives and fasteners; (iii) finishing materials; (iv) metal claddings, canvas, PVC, pit wrap, paint, finishing cement and other similar over insulation applications not referred to in subclauses (i) to (iii); (v) noise control materials; (vi) firestopping and fireproofing materials; (vii) utilidors; (b) “undertakings of the designated trade” means the following: (i) the installation, service, maintenance, repair and removal of insulation items; (ii) the abatement and removal of asbestos. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of insulator (heat and frost): (a) installing, servicing, maintaining, repairing and removing insulation items; (b) abating and removing asbestos; (c) using detailed drawings, blueprints and other specifications; (d) using all related standards, safety regulations and building codes and regulations; (e) working with insulation items and related equipment; (f) using hand tools, power tools, shop equipment and stud welding equipment; (g) cleaning up and removing insulation items; (h) assembling, erecting, installing and removing insulation materials and handling devices, scaffolds, ropes and slings; (i) estimating, preparing, scheduling and worksite planning; (j) handling, laying out, preparing, fabricating and assembling insulation items and all protective coatings and coverings; (k) using new technology relating to the restricted activities set out in this section. Classes of individuals 72 Only the following classes of individuals may perform a restricted activity within the designated trade of insulator (heat and frost): (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. 73 and 74 Repealed AR 121/2023 s14. Ironworker — Ironworker (Metal Building Systems Erector) Branch Restricted activities 75 (1) In this section, (a) “Alberta Building Code” means the code declared in force with respect to buildings by section 1 of the Building Code Regulation (AR 5/2024); (b) “metal building systems” means buildings that (i) are non‑residential, prefabricated metal structures, not more than 2 storeys, that meet Alberta Building Code requirements for certification by the Canadian Standards Association, (ii) are constructed of an interior load‑bearing framework and an outer non‑load‑bearing cladding, and (iii) are erected, assembled and installed in accordance with the manufacturer’s instructions without modification to the manufacturer’s specifications, but does not include Quonsets or other frameless metal buildings; (c) repealed AR 70/2026 s4; (d) “storey” has the meaning assigned to it in the Alberta Building Code; (e) repealed AR 70/2026 s4; (f) “undertakings of the branch of the designated trade” means the assembly, erection and disassembly of metal building systems. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the ironworker (metal building systems erector) branch of the designated trade of ironworker: (a) assembling metal building systems; (b) erecting metal building systems; (c) disassembling metal building systems; (d) using detailed drawings, blueprints and other specifications; (e) using hand tools, power tools and shop equipment; (f) using, setting up or assembling rigging equipment; (g) using oxyfuel cutting and arc tack welding equipment in heat straightening, cutting and joining metals; (h) using new technology in relation to the restricted activities set out in this section; (i) using and maintaining fall protection systems; (j) installing exterior and interior doors and windows; (k) installing caulking, adhesives and sealant materials. Classes of individuals 76 Only the following classes of individuals may perform a restricted activity within the ironworker (metal building systems erector) branch of the designated trade of ironworker: (a) any individual who holds a trade certificate in any of the following: (i) the branch of the designated trade; (ii) the ironworker (generalist) branch of the designated trade issued before October 1, 2023; (iii) the ironworker (structural/ornamental) branch of the designated trade; (iv) the ironworker branch of the designated trade issued before September 1, 2017; (v) the metal building systems erector branch of the designated trade issued before September 1, 2017; (vi) the structural/ornamental branch of the designated trade issued before September 1, 2017; (b) any individual who holds an endorsement in the ironworker (generalist) branch or the ironworker (structural/ornamental) branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the ironworker (structural/ornamental) branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the ironworker (structural/ornamental) branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the ironworker (structural/ornamental) branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the ironworker (structural/ornamental) branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the ironworker (structural/ornamental) branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Ironworker — Ironworker (Reinforcing) Branch Restricted activities 77 (1) In this section, (a) “Alberta Building Code” means the code declared in force with respect to buildings by section 1 of the Building Code Regulation (AR 5/2024); (b) “concrete reinforcement” means metal, steel or synthetic strands, wires, mesh, fabric, bars or sheets, placed into concrete structures for the purpose of reinforcing, pre‑tensioning or post‑tensioning of concrete structures; (c) repealed AR 70/2026 s4; (d) “reinforced concrete” means concrete that is cast in place or precast and is reinforced with concrete reinforcement materials; (e) “storey” has the meaning assigned to it in the Alberta Building Code; (f) “structures” means the following: (i) any type of residential, commercial, industrial, civil or agricultural structure; (ii) bridges, including abutments, decks, girders, beams, diaphragms, piers and permanent guard rails; (iii) buildings that are engineered and constructed of reinforced concrete, other than buildings constructed using insulated concrete forms; (g) “undertakings of the branch of the designated trade” means the erection, placement, attachment, prestressing and post-tensioning of concrete reinforcement materials. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the ironworker (reinforcing) branch of the designated trade of ironworker: (a) erecting concrete reinforcement materials; (b) placing concrete reinforcement materials; (c) attaching concrete reinforcement materials; (d) performing post‑tensioning; (e) performing prestressing; (f) using detailed drawings, blueprints and other specifications; (g) using hand tools, power tools and shop equipment; (h) using, setting up and assembling rigging equipment; (i) using oxyfuel cutting and arc tack welding equipment in heat straightening, cutting and joining metals; (j) using new technology in relation to the restricted activities set out in this section; (k) using and maintaining fall protection systems. Classes of individuals 78 Only the following classes of individuals may perform a restricted activity within the ironworker (reinforcing) branch of the designated trade of ironworker: (a) any individual who holds a trade certificate in any of the following: (i) the branch of the designated trade; (ii) the ironworker (generalist) branch of the designated trade issued before October 1, 2023; (iii) the ironworker branch of the designated trade issued before September 1, 2017; (iv) the reinforcing branch of the designated trade issued before September 1, 2017; (b) any individual who holds an endorsement in the branch of the designated trade or the ironworker (generalist) branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Ironworker — Ironworker (Structural/Ornamental) Branch Restricted activities 79 (1) In this section, (a) “Alberta Building Code” means the code declared in force with respect to buildings by section 1 of the Building Code Regulation (AR 5/2024); (b) “metal building systems” means buildings that (i) are non‑residential, prefabricated metal structures, not more than 2 storeys, that meet Alberta Building Code requirements for certification by the Canadian Standards Association, (ii) are constructed of an interior load‑bearing framework and an outer non‑load‑bearing cladding, and (iii) are erected, assembled and installed in accordance with the manufacturer’s instructions without modification to the manufacturer’s specifications, but does not include Quonsets or other frameless metal buildings; (c) “precast concrete component” means the following: (i) post‑tensioned precast panels; (ii) pre‑tensioned precast panels; (iii) architectural panels; (iv) tilt‑up panels; (v) precast abutments; (vi) precast slabs; (vii) precast beams; (viii) precast columns; (ix) precast piers; (x) precast permanent guard rails; (xi) precast free­standing walls; (xii) precast structural walls; (xiii) precast foundations; (xiv) precast floors; (d) “storey” has the meaning assigned to it in the Alberta Building Code; (e) “structures” means the following: (i) any type of residential, commercial, industrial, civil or agricultural structure; (ii) curtain walls; (iii) bridges, including abutments, decks, girders, beams, diaphragms, piers and permanent guard rails; (iv) metal building systems; (v) buildings that are engineered and constructed of metal, steel or precast concrete components, other than buildings constructed using insulated concrete forms; (f) “undertakings of the branch of the designated trade” means the following: (i) the field fabrication, assembly, erection and disassembly of structures, other than the demolition of structures; (ii) the service, maintenance and repair of structures; (iii) the field fabrication and erection of structural, miscellaneous and ornamental metal work; (iv) the erection and placement of precast concrete components or prestressed concrete structures. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the ironworker (structural/ornamental) branch of the designated trade of ironworker: (a) fabricating, assembling, erecting and disassembling of structures in the field; (b) servicing, maintaining and repairing of structures; (c) fabricating and erecting structural, miscellaneous and ornamental metal work in the field; (d) erecting and placing precast concrete components or prestressed concrete structures; (e) using detailed drawings, blueprints and other specifications; (f) using hand tools, power tools and shop equipment; (g) using, setting up or assembling rigging equipment; (h) using oxyfuel cutting and arc tack welding equipment in heat straightening, cutting and joining metals; (i) using new technology in relation to the restricted activities set out in this section; (j) placing mechanical equipment and components; (k) using and maintaining fall protection systems. Classes of individuals 80 Only the following classes of individuals may perform a restricted activity within the ironworker (structural/ornamental) branch of the designated trade of ironworker: (a) any individual who holds a trade certificate in any of the following: (i) the branch of the designated trade; (ii) the ironworker (generalist) branch of the designated trade issued before October 1, 2023; (iii) the ironworker branch of the designated trade issued before September 1, 2017; (iv) the structural/ornamental branch of the designated trade issued before September 1, 2017; (b) any individual who holds an endorsement in the branch of the designated trade or the ironworker (generalist) branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade;

(d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Landscape Horticulturist Restricted activities 81 (1) In this section, “undertakings of the designated trade” means the sale, growth, installation and maintenance of plant or related materials and includes the following: (a) landscape construction; (b) landscape maintenance; (c) the operation of greenhouses, nurseries and garden centres; (d) arboriculture; (e) tree moving; (f) the sale, growth, installation and maintenance of turf grasses; (g) designing, installing and maintaining irrigation systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of landscape horticulturist: (a) selling, growing, installing and maintaining plant or related materials; (b) applying principles of landscape design and construction; (c) constructing and installing landscape planters, walks and other accessories of various materials; (d) handling orders of plant and related materials; (e) operating and servicing the tools and machinery used in the designated trade; (f) applying the principles governing the following: (i) the operation of greenhouses, nurseries and garden centres; (ii) sod production; (iii) interior and exterior landscape maintenance; (iv) plant production; (v) the use of soils; (vi) the use of plant nutrients; (vii) the use of pesticides; (viii) the control of plant diseases and pests; (ix) tree care; (g) applying knowledge respecting botany and plant identification. Classes of individuals 82 Only the following classes of individuals may perform a restricted activity within the designated trade of landscape horticulturist: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Lather (Interior Systems Mechanic) Restricted activities 83 (1) In this section, (a) “lather interior systems” means any type of framework for gypsum materials in buildings and includes the following: (i) light gauge steel stud framing; (ii) load bearing steel stud wall and floor systems; (iii) unitized wall systems; (iv) demountable partitions; (v) suspended drywall ceilings; (vi) component ceilings; (vii) metal linear ceilings; (viii) specialized systems; (ix) drywall; (x) metal lath; (xi) radiation shielding; (xii) access floor systems; (xiii) membrane coatings; (xiv) thermal and acoustical systems; (xv) air and vapour barriers; (b) “undertakings of the designated trade” means the following: (i) the assembly and installation of lather interior systems; (ii) the cutting, shaping, bending, fastening and spot welding of metal components to build support bases for plaster, cement, fireproofing, radiation or soundproofing materials; (iii) the cutting, shaping, aligning and securing of components in lather interior systems for gypsum or other products; (iv) the construction of various types of walls and ceilings or other related structures and the application of exterior and interior trim of metal and other materials. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of lather (interior systems mechanic): (a) assembling and installing lather interior systems; (b) cutting, shaping, bending, fastening and spot welding metal components to build support bases for plaster, cement, fireproofing, radiation or soundproofing materials; (c) cutting, shaping, aligning and securing components in lather interior systems for gypsum or other products; (d) constructing various types of walls and ceilings or other related structures and applying exterior and interior trim of metal and other materials; (e) diagnosing and repairing any problems relating to the lather interior systems; (f) using all hand and power operated equipment required by the designated trade; (g) using blueprints, shop drawings and specifications; (h) applying gypsum lath, metal lath and stucco wire; (i) cutting, preparing, fastening, spot welding, fabricating or other handling of all lath materials. Classes of individuals 84 Only the following classes of individuals may perform a restricted activity within the designated trade of lather (interior systems mechanic): (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Locksmith Restricted activities 85 (1) In this section, (a) “locking device” means any mechanical or electrical device that provides a physical or psychological barrier preventing, delaying or inhibiting unauthorized entry; (b) “undertakings of the designated trade” means the following: (i) the installation, replacement, rebuilding, rearrangement, repair or adjustment of locking devices or safes and their components; (ii) the making of keys by impression, code or other means involving specialized knowledge of locking devices or safes; (iii) the circumvention of locking devices by means other than the use of a key or combination. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of locksmith: (a) handling orders for locks, safes and related equipment; (b) operating and servicing the tools and equipment used in the designated trade; (c) installing, replacing, rebuilding, rearranging, repairing and adjusting locking devices or safes, components and related equipment; (d) making keys by impression, code or other means; (e) circumventing locking devices by means other than use of key or combination; (f) identifying the operation of locking devices and safes; (g) identifying and applying the principles of locking devices; (h) identifying and applying the principles of safes and related equipment; (i) applying in‑depth knowledge of codes and specifications; (j) applying knowledge of master keying; (k) using any new innovative technological changes in the designated trade that relate to materials or methods of construction. Classes of individuals 86 Only the following classes of individuals may perform a restricted activity within the designated trade of locksmith: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Machinist Restricted activities 87 (1) In this section, (a) “parts” means any type of industrial or mass production parts; (b) “undertakings of the designated trade” means the following: (i) the set up or operation of metal removing machine tools to manufacture metals and other materials into precise shapes and sizes; (ii) the production of parts using mass production methods; (iii) the making and repair of parts, tools and machines made from metal, plastic or other materials. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of machinist: (a) setting up or operating metal removing machine tools to manufacture metals and other materials into precise shapes and sizes; (b) producing parts using mass production methods; (c) making and repairing parts, tools and machines made from metal, plastic or other material; (d) setting up and operating standard machine tools used in machine shops, including the following: (i) saws; (ii) drill presses; (iii) lathes; (iv) milling machines; (v) grinding machines; (vi) boring mills; (vii) shapers; (viii) attachments and accessories to any item referred to in subclauses (i) to (vii); (ix) computerized numerical control (CNC) machine tools; (e) interpreting technical drawings, charts, specification measurement and layout drawings and samples; (f) reading and interpreting the information and specifications presented on drawings and sketches, in respect of physical shape, size, material, heat treatment, finish, hardness and other pertinent data; (g) verifying dimensions with precision measuring instruments; (h) forging, heat treating, cutting and joining metals; (i) setting up and operating machine tools and supporting equipment, including oxyfuel welding, cutting and brazing equipment and electric arc welding equipment. Classes of individuals 88 Only the following classes of individuals may perform a restricted activity within the designated trade of machinist: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Metal Fabricator (Fitter) Restricted activities 89 (1) In this section, (a) “Alberta Building Code” means the code declared in force with respect to buildings by section 1 of the Building Code Regulation (AR 5/2024); (b) “structures” means the following: (i) metal railings, ladders and platforms; (ii) metal conventional and spiral stairs; (iii) welded or bolted beams and columns; (iv) girders, trusses and built‑up sections; (v) pressure vessels, multipurpose holding tanks and containers; (vi) structural metal or miscellaneous metal components that are subject to the Alberta Building Code; (c) “undertakings of the designated trade” means the following: (i) the fabrication, layout and assembly of structures; (ii) revisions to structures. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of metal fabricator (fitter): (a) fabricating structures; (b) laying out and assembling structures; (c) revising structures; (d) using detailed drawings, blueprints and other specifications; (e) using layout and fitting hand tools and air and electric powered tools; (f) using shop equipment, including overhead cranes, fork lifts, drilling and threading equipment, grinders, power saws, angle rolls, plate rolls, punches, shears, press brakes, power benders, ironworkers and presses; (g) using, setting up and assembling rigging equipment, including wire rope, synthetic slings, block and tackle, hoisting equipment and scaffolds; (h) using oxyfuel cutting and arc tack welding equipment in heat straightening, cutting and joining metals; (i) using new technology that is related to the designated trade. Classes of individuals 90 Only the following classes of individuals may perform a restricted activity within the designated trade of metal fabricator (fitter): (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Motorcycle Mechanic Restricted activities 91 (1) In this section, (a) “motorcycle” means a multi‑wheeled motor vehicle equipped with (i) astride seating for one or more persons, and (ii) handlebar controls, but does not include a moped as defined in the Use of Highway and Rules of the Road Regulation (AR 304/2002); (b) “undertakings of the designated trade” means the repair and maintenance of motorcycles. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of motorcycle mechanic: (a) repairing and maintaining the following: (i) internal combustion engines and components; (ii) transmissions and power trains; (iii) fuel systems; (iv) exhaust systems; (v) electrical and electronic systems; (vi) vehicle management systems; (vii) wheels and tires; (viii) chassis; (ix) suspension components; (x) steering systems; (xi) braking systems; (xii) sidecar attachments; (xiii) accessories that affect weight distribution and handling; (b) selecting, inspecting, using and maintaining various hand and power tools, measuring tools, testing equipment and shop equipment; (c) selecting, installing and removing fasteners, tubing, piping, couplings, fittings, hoses, electrical wiring and connectors; (d) selecting, installing, inspecting, adjusting and removing bearings, bushings and seals, belts, sheaves, pulleys, chains and sprockets; (e) selecting proper fuels, lubricants, coolants, sealants, adhesives, plastics and plastic metals for intended application; (f) accessing job‑related information from service publications, records, shop controls and other materials and communicating the findings to the proper source; (g) retrieving and inputting applicable information using service related computer software programs; (h) inspecting, monitoring the performance of and operating machinery and equipment; (i) assembling, testing, igniting and adjusting oxyfuel cutting and heating equipment and performing minor cutting and heating repairs; (j) assembling new motorcycles according to manufacturers’ specifications; (k) performing pre‑delivery inspections as per manufacturers’ specifications; (l) inspecting, replacing and servicing wheels and components; (m) inspecting, changing and servicing tires; (n) inspecting, testing, repairing, replacing and adjusting components of mechanical braking systems; (o) inspecting, testing, repairing, replacing, rebuilding, overhauling and adjusting components of hydraulic braking systems; (p) inspecting and testing 2‑ and 4‑cycle engines and components before and after using a variety of hand and power tools and measuring and testing equipment; (q) inspecting, testing and repairing components of the following: (i) liquid cooling systems; (ii) air induction systems; (iii) cooling, filter or screening systems; (iv) engine lubrication systems; (v) engine fuel systems; (vi) electric starter circuits; (r) inspecting, adjusting and replacing engine ignition components; (s) inspecting and replacing elements of engine exhaust systems; (t) dismantling, repairing, replacing and reassembling damaged or worn components of cylinder heads; (u) dismantling, cleaning, inspecting, rebuilding and reassembling various types of cylinder block assemblies; (v) inspecting, testing and replacing storage batteries; (w) testing, rebuilding, adjusting and replacing components of electrical charging systems; (x) testing, overhauling, adjusting and replacing components of lighting, warning and safety electrical systems; (y) inspecting, adjusting, repairing and replacing (i) clutches and components, (ii) kickstart systems and components, and (iii) primary drives, including simplex, duplex, triplex, hyvo chains and cush drives; (z) inspecting, adjusting and replacing (i) final drive components, including chains, belts, shaft drives and universal joints, and (ii) frames and suspension components, including forks, swing arms, and shock absorber units; (aa) installing, adjusting and testing sidecars and components; (bb) installing, adjusting and testing accessories and components that affect weight distribution and handling. Classes of individuals 92 Only the following classes of individuals may perform a restricted activity within the designated trade of motorcycle mechanic: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Natural Gas Compression Technician Restricted activities 93 (1) In this section, (a) “compression” means the act of decreasing the volume and increasing the pressure of gas by mechanical means; (b) “compressor” means a mechanical device used in the natural gas industry that increases the pressure of gas; (c) “natural gas compression” refers to the means and methods used to facilitate the delivery of natural gas from the well head to the end user via a series of specific separation, treatment, injection, disposal and compression processes; (d) “natural gas compression equipment” means any type of fixed or stationary equipment used to gather, store and transmit natural gas and includes the following: (i) stationary and reciprocating internal combustion engines; (ii) motors; (iii) compressors; (iv) pumps; (v) power generators; (vi) mixers and agitators; (vii) coolers, chillers and heat exchangers; (viii) separator systems; (ix) dehydration systems; (x) air and gas dryers; (xi) processing systems, including sweetening, treating and fractionation; (xii) artificial lift systems, including pump jacks and submersible pumps; (xiii) valves and valve controls; (xiv) equipment protection and monitoring systems; (xv) local panel controls; (xvi) low voltage electrical control loops; (xvii) electronic processor and control loops; (xviii) instrumentation control loops; (xix) gearboxes; (xx) clutches; (xxi) drive systems; (xxii) turbines; (e) “optimizing” means adjusting systems affecting the performance and efficiency of natural gas compression equipment; (f) “undertakings of the designated trade” means the installation, commissioning, maintenance and repair of natural gas compression equipment. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of natural gas compression technician: (a) reading and interpreting drawings, schematics, related technical information and materials lists; (b) performing the assembly, installation, inspection, maintenance, repair and overhaul of natural gas compression equipment, including the following: (i) complete ignition analysis, fuel, air, exhaust and engine management systems testing, fault diagnoses and repair; (ii) complete reciprocating and rotating machinery analysis to determine equipment condition, prediction of failure, corrective and preventive measures and equipment performance to design intent; (iii) performing visual walk‑around inspections to determine the external conditions and obvious operational or safety issues that need to be addressed; (c) using a variety of electrical, mechanical and specialty diagnostic test equipment to diagnose problems and adjust engine systems; (d) providing preventive and corrective field mechanical services on gas compression, processing and production equipment on site at client locations; (e) troubleshooting and diagnosing mechanical and general electronic control problems and all levels of compressor system failure; (f) repairing and rebuilding natural gas equipment; (g) inspecting malfunctioning or damaged equipment to determine the nature and scope of the problem using applied failure analysis principles; (h) performing combusted gas emissions measurement and extrapolating findings to correction requirement; (i) assessing technical reports to determine operation problems, future design improvements and production improvements and providing recommendations for improved service and operation procedures;

(j) rigging and hoisting using correct lifting procedures; (k) heating and cutting with oxyfuel equipment; (l) tack welding with electric arc welding equipment; (m) evaluating and optimizing the performance of natural gas compression equipment in respect of how the equipment is used and the conditions under which it operates; (n) performing reliability analysis; (o) performing risk assessments and applying learnings; (p) identifying and developing maintenance strategies based on reliability centred maintenance, condition‑based maintenance, and preventive maintenance concepts; (q) adhering to regulations and standards related to natural gas compression systems to ensure the safety of all workers, the environment and equipment. Classes of individuals 94 Only the following classes of individuals may perform a restricted activity within the designated trade of natural gas compression technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Outdoor Power Equipment Technician — Power Equipment Branch Restricted activities 95 (1) In this section, (a) “marine equipment” means (i) boats and trailers, (ii) jet drives in boats and personal water craft, (iii) outboard motors, (iv) inboard‑outboard engines, and (v) stern drives; (b) “power equipment” means equipment, other than marine equipment or recreational equipment, that in the designated trade of outdoor power equipment technician is commonly known as outdoor power equipment or turf equipment and includes the following: (i) aerators; (ii) air compressors; (iii) chippers and shredders; (iv) compaction equipment; (v) generators; (vi) lawn and garden tractors; (vii) lift equipment; (viii) pressure washers; (ix) pumps; (x) mowers; (xi) chain saws; (xii) seeders; (xiii) sprayers; (xiv) tillers; (xv) trimmers; (xvi) snow removal equipment; (xvii) golf carts; (xviii) utility vehicles specifically designed for use on or with respect to turf; (c) “recreational equipment” means vehicles, including trailers designed for the transportation of the vehicles, that are not defined as power equipment in this section and that in the designated trade of outdoor power equipment technician are commonly known as (i) snowmobiles, (ii) marine equipment, and (iii) outdoor recreational multi‑wheeled utility vehicles that are not required to be registered under the Traffic Safety Act unless they are operated on a highway, but not including (A) a motorcycle as defined in section 91, or (B) any vehicle referred to in section 59(1)(a) or (b), 61(1)(a) or (b), 63(1)(a) or (b) or 65(1)(a) or (b); (d) “undertakings of the branch of the designated trade” means the diagnosis and repair of power equipment. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the power equipment branch of the designated trade of outdoor power equipment technician: (a) diagnosing and repairing power equipment; (b) selecting, inspecting, using and maintaining various hand and power tools, shop equipment, measuring tools and testing equipment; (c) retrieving and inputting applicable information using various media, including service‑related computer software programs; (d) selecting, installing or removing fasteners, tubing, piping, couplings, fittings, hoses, electrical wiring and connectors; (e) selecting, installing, inspecting, adjusting and removing bearings, bushings, seals, belts, sheaves, pulleys, chains and sprockets; (f) selecting proper fuels, lubricants, coolants, sealants, adhesives, plastics and plastic metals for intended application; (g) inspecting, monitoring performance of and operating machinery and equipment; (h) assembling, testing, igniting and adjusting oxyfuel cutting and heating equipment and performing minor cutting and heating repairs; (i) repairing, maintaining and inspecting the following: (i) cutting systems and components; (ii) trailer couplers and hitches on unlicensed, off‑road trailers, with respect to the following: (A) coupling units; (B) fasteners, plungers, sliding fifth wheel plungers and control mechanisms and sliding racks; (C) air release cylinder lines, hoses and fittings; (D) fifth wheel saddles, bushings and pins, fifth wheel mounting components and fifth wheel compensators and components; (E) king pins and upper coupler assemblies and turntables; (F) rubber bushed hitch eyes, safety chains, cables and attachments, draw bars and attachments, pintle hooks and ball hitches; (iii) body units, with respect to structural integrity, including the following: (A) aluminum, steel and stainless steel components of body units; (B) doors, including door seals and rollers, tracks and hardware; (C) loose fasteners; (j) with respect to internal combustion 2‑ and 4‑cycle engines that use gasoline, diesel or alternative fuels, and engine auxiliary systems and accessories, (i) inspecting and testing the following: (A) engines and engine components and engine systems in and out of chassis, before and after service or repair; (B) engine lubrication systems; (C) engine liquid cooling systems; (D) engine air cooling systems and air filtering or screening systems; (E) engine intake and exhaust systems; (F) fuel systems; (G) engine control systems, (ii) diagnosing engine problems, (iii) diagnosing malfunctions, (iv) repairing or replacing components, (v) analyzing parts for failure and determining the causes of the failure, and (vi) removing and installing engines; (k) with respect to power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives and steering clutches and axles, (i) inspecting, testing and adjusting the following: (A) clutches; (B) fluid drives, fluid couplings, torque converters, hydraulic retarders and other connecting units; (C) manual transmissions; (D) variable speed transmissions, high‑low speed units, reverse units and hydrostatic transmissions and their control systems; (E) transfer drives; (F) drive shafts, u‑joints, belt, chain and gear drives, mechanical winch drives, power take‑offs and other drive lines; (G) front and rear differentials and axles; (H) steering clutches; (I) final drives, (ii) diagnosing malfunctions and irregular operation and performance, (iii) removing and installing the following: (A) complete components; (B) complete transmissions; (C) complete gear box drives; (D) complete assemblies, (iv) removing, inspecting, overhauling, repairing and replacing the following: (A) assemblies and their parts; (B) transmission parts and components; (C) transmission control systems and components, and (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (l) with respect to electrical systems and circuits, batteries, charging, starting, lighting and accessories systems, spark ignition systems, electronic systems and circuits, electronic monitoring systems and electronic control systems, (i) inspecting, testing, adjusting and replacing the following: (A) storage batteries; (B) components and circuits, (ii) diagnosing performance, (iii) isolating defects within the system or in another part of the machine, and (iv) analyzing failures and determining the causes of failures; (m) with respect to hydraulic and hydrostatic systems, open and closed centre hydraulic systems, open and closed loop hydrostatic systems and control systems, (i) inspecting, testing and adjusting the following: (A) open and closed centre main hydraulic working systems; (B) open and closed hydrostatic drive and propel systems; (C) hydraulic control systems, (ii) diagnosing malfunctions, (iii) removing and installing components as a unit, (iv) testing, overhauling, repairing and replacing parts and components, and (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (n) with respect to pneumatic systems and air supply and generating systems, (i) inspecting, testing and adjusting air systems, (ii) diagnosing malfunctions, (iii) removing and installing components as a unit, (iv) testing, overhauling, repairing and replacing parts and components, and (v) analyzing the failure of parts and determining the causes of failures and reusability of parts; (o) with respect to steering, braking and suspension systems, (i) inspecting, testing and adjusting the following: (A) manual steering systems; (B) manual braking systems and brake foundation assemblies; (C) hydraulic steering and braking systems; (D) electrical braking systems; (E) suspension systems, (ii) diagnosing malfunctions, (iii) removing and installing components as a unit, (iv) removing, testing, overhauling, repairing, replacing and installing parts and components, and (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (p) with respect to frames, chassis, supporting structures, wheels and tracked undercarriages, cabs, heating systems, canopies and protective structures, (i) inspecting, measuring, removing and installing the following: (A) frames, chassis, supporting structures and components of equipment and machinery; (B) wheels, rims and tires; (C) tracked undercarriages, components and parts; (D) cabs, canopies and protective structures, (ii) repairing and replacing the following: (A) frames, chassis, supporting structures and components of equipment and machinery; (B) wheels, rims and tires; (C) tracked undercarriages, components and parts, (iii) adjusting and aligning frames, chassis, supporting structures and components of equipment and machinery, (iv) adjusting and aligning wheels where applicable and tracked undercarriages, components and parts, (v) adjusting, aligning and repairing assemblies, (vi) inspecting and testing heating systems, (vii) diagnosing and isolating problems and determining causes, and (viii) replacing components and making repairs; (q) with respect to attachments, ground engaging and working tools, booms, structural members, cables, hooks and slings, (i) inspecting, adjusting, aligning, removing, installing, repairing and replacing equipment attachments and components, (ii) inspecting and measuring booms, arms, masts and structural members for signs of misalignment, cracking, loose bolts, metal fatigue and overloading, (iii) analyzing failures and determining causes and correcting where applicable or recommending speciality repair or welding, and (iv) inspecting, removing, installing and replacing equipment cables, hooks and slings; (r) with respect to preventive maintenance, operational safety and equipment economy, (i) identifying and evaluating equipment failures and malfunctions relating to machine maintenance, (ii) identifying unsafe operating practices, and (iii) communicating the following: (A) advice on maintenance to be performed; (B) maintenance safety precautions; (C) correct procedures for equipment inspections, operations, towing, loading, hauling, parking and storage; (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. Classes of individuals 96 Only the following classes of individuals may perform a restricted activity within the power equipment branch of the designated trade of outdoor power equipment technician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who does not hold a trade certificate in the branch of the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Outdoor Power Equipment Technician — Recreational Equipment Branch Restricted activities 97 (1) In this section, (a) “marine equipment” means (i) boats and trailers, (ii) jet drives in boats and personal water craft, (iii) outboard motors, (iv) inboard‑outboard engines, and (v) stern drives; (b) “power equipment” means equipment, other than marine equipment or recreational equipment, that in the designated trade of outdoor power equipment technician is commonly known as outdoor power equipment or turf equipment and includes the following: (i) aerators; (ii) air compressors; (iii) chippers and shredders; (iv) compaction equipment; (v) generators; (vi) lawn and garden tractors; (vii) lift equipment; (viii) pressure washers; (ix) pumps; (x) mowers; (xi) chain saws; (xii) seeders; (xiii) sprayers; (xiv) tillers; (xv) trimmers; (xvi) snow removal equipment; (xvii) golf carts; (xviii) utility vehicles specifically designed for use on or with respect to turf; (c) “recreational equipment” means vehicles, including trailers designed for the transportation of the vehicles, that are not defined as power equipment in this section and that in the designated trade of outdoor power equipment technician are commonly known as (i) snowmobiles, (ii) marine equipment, and (iii) outdoor recreational multi‑wheeled utility vehicles that are not required to be registered under the Traffic Safety Act unless they are operated on a highway, but not including (A) a motorcycle as defined in section 91, or (B) any vehicle referred to in section 59(1)(a) or (b), 61(1)(a) or (b), 63(1)(a) or (b) or 65(1)(a) or (b); (d) “undertakings of the branch of the designated trade” means the diagnosis and repair of recreational equipment. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the recreational equipment branch of the designated trade of outdoor power equipment technician: (a) diagnosing and repairing recreational equipment; (b) selecting, inspecting, using and maintaining various hand and power tools, shop equipment, measuring tools and testing equipment; (c) retrieving and inputting applicable information using various media, including service‑related computer software programs; (d) selecting, installing or removing fasteners, tubing, piping, couplings, fittings, hoses, electrical wiring and connectors; (e) selecting, installing, inspecting, adjusting and removing bearings, bushings, seals, belts, sheaves, pulleys, chains and sprockets; (f) selecting proper fuels, lubricants, coolants, sealants, adhesives, plastics and plastic metals for intended application; (g) inspecting, monitoring performance of and operating machinery and equipment; (h) assembling, testing, igniting and adjusting oxyfuel cutting and heating equipment and performing minor cutting and heating repairs; (i) with respect to internal combustion 2‑ and 4‑cycle engines that use gasoline, diesel or alternative fuels, and engine auxiliary systems and accessories, (i) inspecting and testing the following: (A) engines, engine components and engine systems in and out of chassis, before and after service or repair; (B) engine lubrication systems; (C) engine liquid cooling systems; (D) engine air cooling systems and air filtering or screening systems; (E) engine intake and exhaust systems; (F) fuel systems; (G) engine control systems, (ii) diagnosing engine problems, (iii) diagnosing malfunctions, (iv) repairing or replacing components, (v) analyzing parts for failure and determining the causes of the failure, and (vi) removing and installing engines; (j) with respect to power trains, clutches, fluid drives, transmissions, transfer drives, drive lines, differentials, final drives, axles, stern drives, lower units and inboard jet drive motors, (i) inspecting, testing and adjusting the following: (A) clutches; (B) fluid drives, fluid couplings, torque converters, hydraulic retarders and other connecting units; (C) manual transmissions; (D) power shift transmissions, high‑low speed units, reverse units and automatic transmissions and their control systems; (E) transfer drives; (F) drive shafts, u‑joints, belt, chain and gear drives, mechanical winch drives, power take‑offs and other drive lines; (G) front and rear differentials and axles, stern drives, lower units and inboard and jet drive motors, (ii) diagnosing malfunctions and irregular operation and performance, (iii) removing and installing the following: (A) complete components; (B) complete transmissions; (C) complete gear box drives; (D) complete assemblies, (iv) removing, inspecting, overhauling, repairing and replacing the following: (A) assemblies and their parts; (B) transmission parts and components; (C) transmission control systems and components, and (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (k) with respect to electrical systems and circuits, batteries, charging, starting, lighting and accessories systems, spark ignition systems, electronic systems and circuits, electronic monitoring systems and electronic control systems, (i) inspecting, testing, adjusting and replacing the following: (A) storage batteries; (B) components and circuits, (ii) diagnosing performance, (iii) isolating defects within the system or in another part of the machine, and (iv) analyzing failures and determining the causes of failures; (l) with respect to hydraulic and hydrostatic systems, open and closed centre hydraulic systems, open and closed loop hydrostatic systems and control systems, (i) inspecting, testing and adjusting, (ii) diagnosing malfunctions, (iii) removing and installing components as a unit, (iv) testing, overhauling, repairing and replacing parts and components, and (v) analyzing the failure of parts and determining the causes of failures and the reusability of parts; (m) with respect to pneumatic systems and air supply and generating systems, (i) inspecting, testing and adjusting air systems, (ii) diagnosing malfunctions, (iii) removing and installing components as a unit, (iv) testing, overhauling, repairing and replacing parts and components, and (v) analyzing the failure of parts and determining the causes of failures and reusability of parts; (n) with respect to steering, braking and suspension systems, inspecting, testing and adjusting the following: (i) manual steering systems; (ii) manual braking systems and brake foundation assemblies; (iii) hydraulic steering and braking systems; (iv) electrical braking systems; (v) suspension systems; (o) with respect to frames, chassis, supporting structures and components, (i) inspecting, repairing and replacing wheels, rims and tires, (ii) adjusting and aligning frames, chassis, supporting structures and components, (iii) adjusting and aligning wheels where applicable, (iv) adjusting, aligning and repairing assemblies, (v) inspecting and testing heating systems, (vi) diagnosing and isolating problems and determining causes, and (vii) replacing components and making repairs; (p) with respect to attachments and working tools, structural members, cables, hooks and slings, (i) inspecting, adjusting, aligning, removing, installing, repairing and replacing vehicle attachments and components, (ii) inspecting and measuring structural members for signs of misalignment, cracking, loose bolts, metal fatigue and overloading, (iii) analyzing failures and determining causes and correcting where applicable or recommending speciality repair or welding, and (iv) inspecting, removing, installing and replacing equipment cables, hooks and slings; (q) with respect to preventive maintenance, operational safety and vehicle economy, (i) identifying and evaluating component failures and malfunctions relating to vehicles, (ii) identifying unsafe operating practices, and (iii) communicating the following: (A) advice on maintenance to be performed; (B) maintenance safety precautions; (C) correct procedures for vehicle inspections, operations, towing, loading, hauling, parking and storage; (D) the importance of the use of proper fuel, lubricants, coolants, filters and similar items and providing advice in respect of those matters. Classes of individuals 98 Only the following classes of individuals may perform a restricted activity within the recreational equipment branch of the designated trade of outdoor power equipment technician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who does not hold a trade certificate in the branch of the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Painter and Decorator Restricted activities 99 (1) In this section, (a) “finishing materials” means any type of residential, commercial and industrial finishing or coating materials and includes the following: (i) paints, stains, varnishes and other liquid finishes; (ii) paper, natural and synthetic fibre wall coverings; (iii) special finishes; (iv) fire proof and fire retardant coatings; (b) “undertakings of the designated trade” means the preparation of surfaces to receive finishing materials and the application of finishing materials. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of painter and decorator: (a) using detailed drawings, blueprints and other specifications; (b) taping and crack filling drywall surfaces; (c) applying opaque and transparent liquid coatings by brush, roller, spray or dipping to interior and exterior surfaces of wood, metal, brick, concrete, plaster, stucco and stone; (d) applying wall coverings consisting of paper and natural or synthetic fibre to surfaces in buildings and other structures; (e) removing existing coatings of paper, fabrics, paints and varnishes to repair and prepare undersurfaces for refinishing; (f) transposing super graphics; (g) finishing surfaces using abrasive blasting or other mechanical methods for decorative or protective purposes; (h) diagnosing problems related to finishing materials; (i) using, setting up and assembling rigging equipment, including wire rope, block and tackle, hoisting equipment and portable and suspension scaffolding; (j) using and maintaining hand tools, power equipment and precision‑built machinery; (k) handling hazardous materials; (l) using new technology related to the restricted activities set out in this section. Classes of individuals 100 Only the following classes of individuals may perform a restricted activity within the designated trade of painter and decorator: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Parts Technician — Materials Technician Branch Restricted activities 101 (1) In this section, (a) “commodities” includes any product, substance or organism pertaining to the following: (i) consumer services or products; (ii) agricultural services or products; (iii) transportation services or products; (iv) natural resource products; (v) manufacturing products; (vi) services or products for all levels of government; (b) “undertakings of the branch of the designated trade” means the stock handling, inventory control, storing, securing, identifying, cataloguing, ordering, shipping, transporting, receiving, inspecting, pricing, purchasing, issuing, marketing and selling of commodities. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the materials technician branch of the designated trade of parts technician: (a) assessing customer requirements and providing the commodities necessary for service, repair or replacement; (b) using electronic and non‑electronic location systems, identification systems, communication systems and business procedures for the purpose of managing inventory and addressing customer needs; (c) selling and distributing commodities; (d) selecting, operating and basic maintenance of hand tools and material handling equipment; (e) wrapping, packaging, labelling and strapping commodities; (f) planning, maintaining and updating display areas; (g) operating and managing tool cribs. Classes of individuals 102 Only the following classes of individuals may perform a restricted activity within the materials technician branch of the designated trade of parts technician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who does not hold a trade certificate in the branch of the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Parts Technician — Parts Technician Branch Restricted activities 103 (1) In this section, (a) “parts” means any part, assembly or accessory pertaining to the following: (i) automobiles and trucks; (ii) aviation; (iii) electronics; (iv) heavy duty vehicles and equipment; (v) agricultural equipment; (vi) industrial equipment; (vii) military equipment; (viii) motorcycles; (ix) outdoor power equipment; (x) recreational vehicles and equipment; (xi) marine equipment; (xii) turf equipment; (xiii) appliances; (b) “undertakings of the branch of the designated trade” means the stock handling, inventory control, storing, securing, identifying, cataloguing, ordering, shipping, transporting, receiving, inspecting, pricing, purchasing, issuing, marketing and selling of parts. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the parts technician branch of the designated trade of parts technician: (a) assessing customer requirements and providing the parts necessary for service, repair or replacement; (b) using electronic and non‑electronic location systems, identification systems, communication systems and business procedures for the purpose of managing inventory and addressing customer needs; (c) selling and distributing parts; (d) selecting, operating and basic maintenance of hand tools and material handling equipment; (e) wrapping, packaging, labelling and strapping parts; (f) planning, maintaining and updating display areas; (g) operating and managing tool cribs. Classes of individuals 104 Only the following classes of individuals may perform a restricted activity within the parts technician branch of the designated trade of parts technician: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade;

(c) any individual who does not hold a trade certificate in the branch of the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the branch of the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (g) any individual who is registered in a student work training program in the branch of the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Plumber Restricted activities 105 (1) In this section, (a) “plumbing” means any kind of residential, commercial, institutional or industrial piping systems, including fixtures and fittings, and includes the following: (i) below ground storm and sanitary systems; (ii) above ground storm and sanitary systems; (iii) underground public water supply systems; (iv) water distribution systems; (v) fixtures, appliances and trim; (vi) water supply systems; (vii) hydronic systems; (viii) irrigation systems; (ix) compressed gas, medical gas, air and vacuum systems; (x) water treatment devices; (xi) fire protection systems other than commercial sprinkler systems; (xii) ornamental water systems; (xiii) fuel gas systems and appliances; (b) “undertakings of the designated trade” means the fabrication, installation, alteration, maintenance and repair of plumbing. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of plumber: (a) fabricating, installing, altering, maintaining and repairing plumbing; (b) determining location, size and material required from prints and specifications; (c) compiling material breakdown and takeoff; (d) using tools and special equipment; (e) applying codes to installation requirements; (f) rigging equipment and piping components; (g) designing, installing and maintaining hydronic systems; (h) examining, installing, fabricating, testing, maintaining and replacing (i) water treatment equipment, piping and controls, (ii) drain, waste and vent piping systems, (iii) private and public water supply systems, (iv) water distribution systems, (v) plumbing fixtures, appliances and trim, (vi) rain water leaders, and (vii) supports and hangers; (i) ensuring that all installations, fixtures, equipment and hydronic and water treatment systems (i) are properly sized, aligned, supported and graded, (ii) meet the requirements of the appropriate codes and permits, (iii) meet the environmental protection requirements, and (iv) meet the requirements as specified by the manufacturer of the fixtures, equipment and systems; (j) maintaining and servicing private sewage systems. Classes of individuals 106 Only the following classes of individuals may perform a restricted activity within the designated trade of plumber: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Power System Electrician Restricted activities 107 (1) In this section, (a) “power system” means any type of public or private electrical high voltage generation, transmission or distribution system and includes the following: (i) power system electrical equipment; (ii) power system metering apparatus; (iii) power system protection apparatus; (iv) power system control apparatus; (v) transportation control systems; (vi) electrical transportation systems; (vii) grounding and bonding systems; (b) “undertakings of the designated trade” means the installation, construction, maintenance, repair, monitoring and operation of power systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of power system electrician: (a) installing and constructing power systems; (b) maintaining and repairing power systems; (c) monitoring power systems; (d) operating power systems; (e) using tools, power tools, testing equipment, computers and specialty tools required by the designated trade; (f) installing, troubleshooting, maintaining and commissioning public or private power system equipment and apparatus; (g) interpreting and applying the provisions of the Safety Codes Act and the regulations under that Act for the purposes of carrying out the restricted activities set out in this section; (h) interpreting electrical drawings and prints. Classes of individuals 108 Only the following classes of individuals may perform a restricted activity within the designated trade of power system electrician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Powerline Technician Restricted activities 109 (1) In this section, (a) “power line electrical transmission and distribution systems” includes the following: (i) overhead and underground transmission and distribution systems; (ii) poles; (iii) towers; (iv) transformers; (v) switching equipment; (vi) capacitors; (vii) protective devices; (viii) metering equipment; (ix) voltage regulators; (x) portable generation systems; (xi) street lighting equipment; (xii) light rail transit and trolley systems; (b) “undertakings of the designated trade” means the installation, construction, maintenance and repair of power line electrical transmission and distribution systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of powerline technician: (a) installing, constructing, maintaining and repairing power line electrical transmission and distribution systems; (b) using test equipment and specialty tools required by the designated trade; (c) operating vehicles and equipment related to the designated trade; (d) operating mobile lifting devices used in power line and electric utility services to auger holes and to set utility poles and place associated equipment; (e) giving directions respecting and supervising the placement of overhead and underground transmission and distribution lines; (f) inspecting, testing, disassembling, assembling, framing, erecting and setting poles, anchors, towers and associated equipment; (g) loading and offloading equipment, materials and supplies in overhead and underground systems; (h) installing, sagging, deadending, connecting, splicing, terminating, inspecting, testing, maintaining, repairing and locating overhead and underground primary and secondary conductors and cables; (i) installing, testing and maintaining the following: (i) transformers in overhead and underground systems; (ii) voltage regulators in overhead and underground systems; (iii) capacitors and switching equipment; (iv) isolating and protective devices on overhead and underground systems; (v) street lighting equipment; (vi) traffic signal systems; (vii) related metering equipment; (viii) light rail transit and trolley systems; (ix) precast vaults, pads, bases and duct work; (j) performing live line maintenance techniques; (k) operating, testing and re‑fusing overhead and underground isolating and protective devices; (l) interpreting and applying regulations and standards related to power line electrical transmission and distribution systems. Classes of individuals 110 Only the following classes of individuals may perform a restricted activity within the designated trade of powerline technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Recreation Vehicle Service Technician Restricted activities 111 (1) In this section, (a) “recreation vehicle” means any type of live‑in recreation vehicle that is designed for travel, and includes the following: (i) travel trailers; (ii) truck campers; (iii) fifth wheel trailers; (iv) motor homes and conversions; (v) fold down camping trailers; (b) “undertakings of the designated trade” means (i) the diagnosis of problems relating to recreational vehicles, and (ii) the installation, service, maintenance, repair, removal, replacement and modification of parts, components, accessories, appliances and systems designed for recreational vehicles, but does not include the following: (iii) the service, maintenance, repair or overhaul of the engine or power train of a motor vehicle; (iv) the installation, removal or replacement of parts and components on the engine or power train of a motor vehicle; (v) the diagnosis of problems relating to the engine or power train of a motor vehicle. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of recreation vehicle service technician: (a) diagnosing problems relating to recreation vehicles; (b) installing, servicing, maintaining, repairing, removing, replacing and modifying parts, components, accessories, appliances and systems designed for recreation vehicles; (c) using hand tools, power tools, specialty tools and equipment while working on recreation vehicles; (d) using electrical, electronic and other measuring and testing devices while working on recreation vehicles; (e) installing, removing, modifying or repairing electrical wiring and components in recreation vehicles; (f) installing, removing, modifying or repairing hoses and piping in recreation vehicles; (g) diagnosing, installing, maintaining and servicing towing systems in recreation vehicles; (h) diagnosing, installing, maintaining and servicing chassis, frames, suspension and mechanical components and systems in recreation vehicles; (i) repairing, modifying or replacing materials used in or in relation to recreation vehicles; (j) diagnosing, maintaining, modifying and installing gas and liquid components and systems used in recreation vehicles. Classes of individuals 112 Only the following classes of individuals may perform a restricted activity within the designated trade of recreation vehicle service technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Refrigeration and Air Conditioning Mechanic Restricted activities 113 (1) In this section, (a) “refrigeration and air conditioning system” means any type of primary or secondary refrigeration and air conditioning system, other than the duct work and sheet metal items associated with the system, and includes the following: (i) piping; (ii) compressor assemblies; (iii) condenser and cooling tower assemblies; (iv) evaporator assemblies and defrost systems; (v) system controls and control valves; (vi) air handling, distribution equipment and make up air and exhaust systems; (vii) heat recovery and indoor air quality systems; (viii) circulating pump assemblies; (ix) geo‑thermal and heat pump systems; (x) packaged and central air conditioning systems; (xi) pre‑fabricated walk in coolers, freezers and environmental panels; (xii) system accessories and ancillary components; (xiii) monitoring and control and detection systems that are part of or used in respect of refrigeration and air conditioning systems; (xiv) commercial and industrial refrigeration process equipment and control systems; (xv) specialized food service equipment; (b) “undertakings of the designated trade” means the installation, maintenance, service, alteration, repair and decommission of refrigeration and air conditioning systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of refrigeration and air conditioning mechanic: (a) installing, maintaining and servicing refrigeration and air conditioning systems; (b) altering, repairing and decommissioning refrigeration and air conditioning systems; (c) removing refrigerants from refrigeration and air conditioning systems; (d) installing, removing, recycling, storing and disposing of primary and secondary refrigerants; (e) transporting, handling and using refrigerants and other dangerous goods; (f) using electrical and other measuring and testing devices in relation to refrigeration and air conditioning systems; (g) carrying out soldering, brazing, welding and various other pipe joining techniques on or in relation to refrigeration and air conditioning systems; (h) maintaining and making electrical repairs to existing equipment from the breaker or disconnect switch as follows: (i) changing controls, contactors, motors and compressors; (ii) repairing burnt or broken wires; (iii) making minor upgrades of controls to existing refrigeration and air conditioning systems; (i) maintaining and repairing refrigeration and air conditioning units, appliances and accessories designed for the utilization of natural or propane gas as a fuel for heating or cooling that do not exceed 400 000 BTU (117 kW) input; (j) using tools specific to the designated trade, hand tools and power tools while working on refrigeration and air conditioning systems. Classes of individuals 114 Only the following classes of individuals may perform a restricted activity within the designated trade of refrigeration and air conditioning mechanic: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Roofer Restricted activities 115 (1) In this section, (a) “roof” means any type of residential, commercial or industrial roof that is built up or shingled or that is coated with a plastic membrane, and includes the following: (i) roof decks; (ii) roof structures; (iii) foundations; (iv) control and expansion joints; (v) copings and parapets; (vi) eaves; (vii) curbs; (b) “undertakings of the designated trade” means the following: (i) the preparation, application, service, insulation and replacement of roofs; (ii) the damp‑proofing and waterproofing of roofs and coolers; (iii) the installation of roof tiles that are made of clay, concrete, steel, fiberglass, cement fibre or similar material; (iv) the installation of rigid pre‑formed sheet roofing systems that are made of metal, vinyl or fiberglass. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of roofer: (a) preparing, applying, servicing, insulating and replacing roofs; (b) damp‑proofing and waterproofing roofs and coolers; (c) installing on roofs tiles that are made from clay, concrete, steel, fibreglass, cement fibre or similar material; (d) installing rigid pre‑formed sheet roofing systems that are made of metal, vinyl or fiberglass; (e) removing existing roof; (f) preparing and repairing roof deck surfaces; (g) installing and repairing vapour barriers and insulation, whether flat or tapered; (h) applying conventional and inverted built‑up roofing systems hot and cold process materials; (i) installing single‑ply sheet membrane roofing systems; (j) applying shingles to new and existing buildings, including asphalt, fibreglass, metal, wood, SBS modified, slate and cement fibre shingles; (k) diagnosing and repairing any problem relating to roofs; (l) using all hand and power operated equipment used to carry out the restricted activities set out in this section; (m) working with roofing materials; (n) preparing, servicing and applying waterproofing materials; (o) interpreting blueprints and shop drawings; (p) laying out and developing projects according to blueprints and shop drawing specifications; (q) calculating roofing materials and quantities of roofing materials; (r) storing and handling roofing materials and equipment. Classes of individuals 116 Only the following classes of individuals may perform a restricted activity within the designated trade of roofer: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Sheet Metal Worker Restricted activities 117 (1) In this section, (a) “heating system” means a system for heating and circulating air inside a building using a gas fired appliance; (b) “sheet metal items” means the following: (i) square or round duct lines and fittings; (ii) sheet metal containers; (iii) sheet metal roofs, roof flashings and accessories; (iv) sheet metal lagging; (v) all other custom fabricated objects constructed from sheet metal; (c) “undertakings of the designated trade” means the following: (i) the lay out, preparation, fabrication, assembly and installation of sheet metal items; (ii) the fabrication, installation, service, maintenance and upgrade of (A) fume and dust exhaust systems for residential, commercial and industrial sites, (B) heating systems, ventilation systems and venting systems for residential, commercial and industrial sites, (C) air conditioning systems of up to 5 tons total capacity per system for residential sites, and (D) equipment associated with the undertakings referred to in paragraphs (A) to (C); (d) “ventilation system” means a system for exchanging air inside a building with fresh outside air and circulating air within a building; (e) “venting system” means a system for exhausting combustion gases to the outside of a building and supplying air for combustion by heating systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of sheet metal worker: (a) laying out, preparing, fabricating, assembling and installing sheet metal items; (b) fabricating, installing, servicing, maintaining and upgrading the following: (i) fume and dust exhaust systems for residential, commercial and industrial sites; (ii) heating systems, ventilation systems and venting systems for residential, commercial and industrial sites; (iii) air conditioning systems of up to 5 tons total capacity per system for residential sites; (iv) equipment associated with fabricating, installing, servicing, maintaining and upgrading any of the systems listed in subclauses (i) to (iii); (c) using sheet metal pattern development methods and standards; (d) using various types of sheet metal materials; (e) assembling and installing equipment, materials and system components on the job site; (f) laying out, preparing, assembling and installing venting systems and pre‑fabricated components of venting systems; (g) installing, maintaining and repairing the following: (i) furnaces; (ii) heat pumps; (iii) unit heaters; (iv) combination rooftop units; (v) make‑up air units; (vi) heat recovery and indoor air quality systems; (vii) heating systems; (viii) ventilation systems; (ix) air conditioning systems of up to 5 tons total capacity per system; (x) appliances; (xi) accessories to any item listed in subclauses (i) to (x) and equipment similar to any item listed in subclauses (i) to (x) or used for sheet metal work;

(h) carrying out the following servicing on electrical components of heating systems, ventilation systems and air conditioning systems, along with the associated connection and disconnection of de‑energized electrical supply circuits of the systems: (i) servicing or changing controls, contactors and motors; (ii) repairing burnt or broken wires; (iii) making minor upgrades of controls to existing heating systems, ventilation systems and air conditioning systems; (i) using sheet metal welding equipment in heat straightening, cutting and joining metals; (j) using sheet metal shop equipment, including rotary, bench and floor machines; (k) assembling, erecting, installing and removing material and personnel handling devices, scaffolds, ropes and slings; (l) using hand tools, power tools, transits, levels and explosive actuated tools; (m) using detailed drawings, blueprints and other specifications; (n) estimating, job planning, preparing and scheduling; (o) applying new innovative technological changes in the designated trade, including materials and methods of construction. Classes of individuals 118 Only the following classes of individuals may perform a restricted activity within the designated trade of sheet metal worker: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Sprinkler Systems Installer Restricted activities 119 (1) In this section, (a) “sprinkler system” means any kind of residential, commercial or industrial sprinkler system and includes the following: (i) automatic fire suppression systems; (ii) automatic detection suppression systems; (iii) stand pipe and hose systems; (iv) fire protection water supply systems, including underground mains; (v) fire pumps and controls; (vi) fire extinguishers; (vii) fire hydrants and related equipment; (viii) fire stopping materials; (ix) piping, controls and fittings that are part of or ancillary to a sprinkler system; (b) “undertakings of the designated trade” means the fabrication, installation, alteration, adjustment, maintenance and repair of sprinkler systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of sprinkler systems installer: (a) fabricating, installing, altering, adjusting, maintaining and repairing sprinkler systems, including the following: (i) wet sprinkler systems; (ii) dry sprinkler systems; (iii) preaction and deluge systems; (iv) foam systems; (v) CO2 and other gas extinguishing systems; (vi) dry chemical systems; (vii) exposure protection systems; (b) determining location, size and material required from prints and specifications; (c) compiling material breakdown and takeoff; (d) identifying and using tools and special equipment that are used to carry out the restricted activities set out in this section; (e) erecting and using steel scaffolding, power‑operated scaffolding and swing stages; (f) applying codes to installation, inspection and maintenance requirements; (g) rigging equipment and piping components; (h) installing and maintaining appliances, controls, equipment, piping and hangers; (i) examining, inspecting and testing sprinkler systems. Classes of individuals 120 Only the following classes of individuals may perform a restricted activity within the designated trade of sprinkler systems installer: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (d) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (e) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (f) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (g) any individual who is registered in a student work training program in the designated trade; (h) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (i) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (j) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (k) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (l) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (m) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Steamfitter‑Pipefitter Restricted activities 121 (1) In this section, (a) “piping system” means any type of commercial or industrial piping system and includes the following: (i) hot liquid systems; (ii) high and low pressure steam systems; (iii) boilers and controls for boilers; (iv) control and indicating devices systems; (v) heating and cooling systems; (vi) heat exchanger systems; (vii) process systems; (viii) power plant systems; (ix) compressed gas systems; (x) vacuum, pneumatic and hydraulic systems; (xi) fire protection systems other than sprinkler systems; (xii) flue gas systems; (xiii) water treatment systems; (xiv) fuel systems; (xv) medical gas systems; (b) “undertakings of the designated trade” means the fabrication, installation, alteration, maintenance and repair of piping systems. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of steamfitter‑pipefitter: (a) fabricating, installing, altering, maintaining and repairing piping systems; (b) determining location, size and material required; (c) producing fabrication and layout drawings from prints and specifications; (d) compiling material breakdown and takeoff; (e) identifying and using tools and special equipment that are used to carry out the restricted activities set out in this section; (f) applying codes to installation requirements; (g) rigging, hoisting and lifting equipment and piping components; (h) installing, maintaining, servicing and troubleshooting boilers and controls; (i) installing, maintaining and servicing heat exchange equipment and controls; (j) cutting, preparing, aligning and assembling piping; (k) installing, maintaining and servicing pumps, valves and related equipment; (l) installing, maintaining and servicing components in heating, ventilation and air conditioning systems; (m) fabricating and installing pipe supports, hangers and equipment supports. Classes of individuals 122 Only the following classes of individuals may perform a restricted activity within the designated trade of steamfitter‑pipefitter: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who holds an endorsement in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Transport Refrigeration Technician Restricted activities 123 (1) In this section, (a) “auxiliary power units” include mobile generator systems and other alternative power supplies, the main purpose of which is to support mobile refrigeration and heating equipment; (b) “mobile equipment” includes trucks, trailers and specialized shipping containers with heating and air conditioning systems; (c) “mobile refrigeration and heating equipment” means any type of primary or secondary refrigeration system used to supply optimal environmental conditions for transportation of goods by mobile equipment, including the following components: (i) piping; (ii) compressor assemblies; (iii) condenser assemblies; (iv) evaporator assemblies; (v) system controls and control valves; (vi) air handling and distribution equipment; (vii) humidifier assemblies; (viii) air cleaner assemblies; (ix) system accessories and ancillary components; (x) equipment used to monitor and control refrigeration systems and detect malfunctions in refrigeration systems; (xi) auxiliary heaters; (xii) mechanical generating systems; (xiii) electrical and hybrid power supply systems; (xiv) diesel engines and related systems; (d) “undertakings of the designated trade” means the installation, maintenance, service, alteration and repair of mobile refrigeration and heating equipment and auxiliary power units. (2) The following activities, when performed within undertakings of the designated trade, are restricted activities within the designated trade of transport refrigeration technician: (a) installing, maintaining, servicing, altering and repairing (i) mobile refrigeration and heating equipment, and (ii) auxiliary power units; (b) using hand tools, power tools and specialized tools and equipment while working on mobile refrigeration and heating equipment; (c) using mechanical, electrical, electronic and other measuring and testing devices in relation to mobile refrigeration and heating equipment; (d) carrying out soldering, brazing and welding on or in relation to mobile refrigeration and heating equipment; (e) maintaining and making electrical repairs to existing mobile refrigeration and heating equipment and auxiliary power units from the breaker or disconnect switch as follows: (i) repairing burnt, broken or damaged wires and connections; (ii) making upgrades to controls of existing mobile refrigeration and heating equipment; (f) installing, maintaining and repairing natural gas and propane gas auxiliary heating units as well as hybrid control systems; (g) installing, maintaining and repairing engines and compressors; (h) installing, removing, recycling, storing and disposing of primary and secondary refrigerants; (i) transporting, handling and using refrigerants and other dangerous goods related to mobile refrigeration and heating systems. Classes of individuals 124 Only the following classes of individuals may perform a restricted activity within the designated trade of transport refrigeration technician: (a) any individual who holds a trade certificate in the designated trade; (b) any individual who does not hold a trade certificate in the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the supervision of an individual who holds a trade certificate in the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (f) any individual who is registered in a student work training program in the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the designated trade if, during the time that the individual is registered in the program, the work of the individual in the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Water Well Driller — Earth Loop Technician Branch Restricted activities 125 (1) In this section, (a) “earth loop” means any part, assembly or accessory pertaining to ground source heat exchange systems comprised of piping that is placed into the earth in a series of closed loops and transports fluid for the purpose of heating and cooling residential homes or commercial buildings or both; (b) “undertakings of the branch of the designated trade” means the designing, drilling, construction, installation, grouting, servicing, reconditioning and decommissioning of earth loops. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the earth loop technician branch of the designated trade of water well driller: (a) drilling bore fields and holes and constructing horizontal trenches; (b) designing, drilling, constructing and installing earth loops; (c) grouting bore fields and holes; (d) servicing, reconditioning and decommissioning of earth loops; (e) completing earth loop records and reports as required by the Government of Alberta and the ground source heat exchange industry; (f) operating the tools of the designated trade; (g) operating and maintaining equipment and drilling systems for drilling earth loops; (h) heating and cutting metal using the appropriate equipment; (i) identifying and applying the standards and regulations governing the ground source heat exchange industry; (j) identifying and describing geological formations; (k) monitoring and managing natural gas in the drilling and completion of earth loop bore fields and holes; (l) monitoring groundwater. Classes of individuals 126 Only the following classes of individuals may perform a restricted activity within the earth loop technician branch of the designated trade of water well driller: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who does not hold a trade certificate in the branch of the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulatio n in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Water Well Driller — Water Well Driller Branch Restricted activities 127 (1) In this section, (a) “undertakings of the branch of the designated trade” means the following: (i) the designing, drilling, construction, development, servicing, disinfecting, sanitation, reconditioning and decommissioning of water wells; (ii) the repairing, servicing, installing and disinfecting of water well pumps and systems; (b) “water well” means a hole or shaft sunk into the earth by means of a mobile rotary, boring or cable tool drilling rig to provide access to a water source for residential, commercial or industrial purposes or any combination of those purposes. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the water well driller branch of the designated trade of water well driller: (a) designing, drilling, constructing, developing, servicing, disinfecting, sanitizing, reconditioning and decommissioning water wells; (b) repairing, servicing, installing and disinfecting water well pumps and systems; (c) completing a bore hole into a finished productive water well; (d) completing and grouting a bore hole; (e) completing water well records and reports as required by the Government of Alberta and the groundwater industry; (f) operating the tools of the designated trade; (g) operating and maintaining equipment and drilling systems for drilling water wells; (h) heating and cutting metal using the appropriate equipment; (i) connecting and installing electrical connections to water pumps; (j) identifying and applying the standards and regulations governing the groundwater industry; (k) identifying and describing geological formations; (l) exploring for groundwater; (m) recognizing groundwater flow; (n) interpreting chemical content of groundwater; (o) monitoring and managing natural gas in the drilling and completion of water wells; (p) monitoring groundwater. Classes of individuals 128 Only the following classes of individuals may perform a restricted activity within the water well driller branch of the designated trade of water well driller: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who does not hold a trade certificate in the branch of the designated trade but who, in the opinion of the individual’s employer, possesses the skills and knowledge in performing the restricted activity expected of an individual who holds a trade certificate in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Welder — Welder Branch Restricted activities 129 (1) In this section, (a) “component” means any object that consists of ferrous or non‑ferrous metal and includes the following objects that are made of or that consist of ferrous or non‑ferrous metal: (i) structures; (ii) pipe; (iii) vessels; (iv) containers; (b) “undertakings of the branch of the designated trade” means the fabrication, service, maintenance and repair of components. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the welder branch of the designated trade of welder: (a) fabricating components; (b) servicing, maintaining and repairing components; (c) setting up oxyfuel accessories using recommended installation procedures; (d) cutting, shaping and fitting steel using oxyfuel processes; (e) cleaning and inspecting cut surfaces; (f) fusion welding using manual oxyfuel processes; (g) brazing and braze welding using oxyfuel processes; (h) applying surfacing materials using oxyfuel processes; (i) joining metals using soldering processes; (j) setting up and welding using shielded metal arc, gas metal arc, flux core arc, submerged arc and gas tungsten arc welding processes; (k) cutting and gouging using electric arc welding processes; (l) welding and cutting using plasma arc processes; (m) setting up equipment and welding using resistance welding processes; (n) identifying metals and performing preparation and assembly tasks prior to welding; (o) performing supplementary and disassembly procedures; (p) using hand tools, power tools and shop equipment; (q) using new innovative technological changes in the designated trade with respect to (i) materials or method of construction, and (ii) the carrying out of the restricted activities set out in this section. Classes of individuals 130 Only the following classes of individuals may perform a restricted activity within the welder branch of the designated trade of welder: (a) any individual who holds a trade certificate in the branch of the designated trade; (b) any individual who holds an endorsement in the branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate or an endorsement in the branch of the designated trade; (e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. Welder — Wire Process Operator Branch Restricted activities 131 (1) In this section, (a) “component” means any object that consists of ferrous or non‑ferrous metal and includes the following objects that are made of or that consist of ferrous or non‑ferrous metal: (i) structures; (ii) pipe; (iii) vessels; (iv) containers; (b) “undertakings of the branch of the designated trade” means the fabrication, service, maintenance and repair of components using processes other than shielded metal arc and gas tungsten arc processes. (2) The following activities, when performed within undertakings of the branch of the designated trade, are restricted activities within the wire process operator branch of the designated trade of welder: (a) fabricating components using processes other than shielded metal arc and gas tungsten arc processes; (b) servicing, maintaining and repairing components using processes other than shielded metal arc and gas tungsten arc processes; (c) cutting steel using oxyfuel processes; (d) cleaning and inspecting cut surfaces; (e) setting up and welding using gas metal arc, flux core arc and submerged arc welding processes; (f) cutting and gouging using electric arc welding processes; (g) welding and cutting using plasma arc processes; (h) setting up equipment and welding using resistance welding processes; (i) identifying metals and performing preparation and assembly tasks prior to welding; (j) using new innovative technological changes in the designated trade with respect to (i) materials or method of construction, and (ii) the carrying out of the restricted activities set out in this section. Classes of individuals 132 Only the following classes of individuals may perform a restricted activity within the wire process operator branch of the designated trade of welder: (a) any individual who holds a trade certificate in the branch of the designated trade or the welder branch of the designated trade; (b) any individual who holds an endorsement in the welder branch of the designated trade; (c) any apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade or the welder branch of the designated trade; (d) any individual who has filed an application for issuance of an Alberta Journeyperson Certificate in the branch of the designated trade or the welder branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the supervision of an individual who holds a trade certificate in the branch of the designated trade;

(e) any individual who has filed an application for approval by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation of an apprenticeship education agreement in the branch of the designated trade or the welder branch of the designated trade if the application is subsisting and, during the time that the application is subsisting, the work of the individual in the branch of the designated trade is carried out under the same conditions as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (f) any individual who is registered in a student work training program in the branch of the designated trade or the welder branch of the designated trade; (g) any individual who is registered in an education or training program that is recognized by the Administrator under section 12(d)(iii) of this Regulation as a program that, on successful completion, will result in a document recognized by order of the Board under section 14(2)(c) of the Act as being the equivalent of an Alberta Journeyperson Certificate in the branch of the designated trade or the welder branch of the designated trade if, during the time that the individual is registered in the program, the work of the individual in the branch of the designated trade is carried out under a mentor and the same supervision and ratio requirements as those that apply to an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the branch of the designated trade; (h) any individual who is performing the restricted activity in accordance with an authorization issued by the Administrator under section 13 of this Regulation; (i) any individual who is performing the restricted activity in accordance with section 14(2) or (3) of this Regulation; (j) any individual who is performing the restricted activity in respect of any property that the individual (i) owns, (ii) has possession of or control over, and (iii) intends only for personal and not‑for‑profit use by the individual; (k) any individual who is performing the restricted activity in respect of a farming and ranching operation, as described in section 1.1(1) and (2) of the Occupational Health and Safety Code (AR 191/2021), if the individual (i) is not paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work, or (ii) is paid wages, as defined in the Employment Standards Code , for the performance of farming or ranching work and, in respect of the farming and ranching operation, is a person referred to in section 1(cc)(i)(B)(I), (II), (III) or (IV) of the Occupational Health and Safety Act ; (l) any individual who is performing a restricted activity within the branch of the designated trade that is the same as a restricted activity within another designated trade or branch of a designated trade and for which the same training is provided in both the branch of the designated trade and the other designated trade or branch of a designated trade if (i) the individual holds a trade certificate or, if applicable, an endorsement in the other designated trade or branch of a designated trade, or (ii) the individual (A) is an apprentice with an apprenticeship education agreement approved by the Registrar under the Apprenticeship Education and Industry Training Programs Regulation in the other designated trade or branch of a designated trade, and (B) has completed the training in respect of the restricted activity. AR 161/2022 Sched 2;121/2023;70/2024;70/2026