Home Heat Tanks Regulations

c t ENVIRONMENTAL PROTECTION ACT HOME HEAT TANKS REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to December 26, 2015. It is intended for information and reference purposes only. This document is not the official version of these regulations. The regulations and the amendments printed in the Royal Gazette should be consulted on the Prince Edward Island Government web site to determine the authoritative text of these regulations. For more information concerning the history of these regulations, please see the Table of Regulations on the Prince Edward Island Government web site (www.princeedwardisland.ca). If you find any errors or omissions in this consolidation, please contact: Legislative Counsel Office Tel: (902) 368-4292 Email: legislation@gov.pe.ca Environmental Protection Act Home Heat Tanks Regulations Section 1 c ENVIRONMENTAL PROTECTION ACT Chapter E-9 HOME HEAT TANKS REGULATIONS Pursuant to section 25 of the Environmental Protection Act R.S.P.E.I. 1988, Cap. E-9, Council made the following regulations: 1. Definitions (1) In these regulations (a) “Act” means the Environmental Protection Act R.S.P.E.I. 1988, Cap. E-9; (b) “alter” means to repair, replace, upgrade, move or remove any part of a home heat tank system; (c) “corrosion resistant” means constructed of (i) non-metallic material, or (ii) metallic material with an epoxy coated lining; (d) “CSA” means the Canadian Standards Association; (e) “Deputy Fire Marshall” means the person appointed as the Deputy Fire Marshall under clause 2(b) of the Fire Prevention Act R.S.P.E.I. 1988, Cap. F-11; (f) “double-bottom tank” means a primary tank that has (i) an additional bottom capable of being pressurized, and (ii) a means to monitor for leaks in the interstitial space between the two bottoms; (g) revoked by EC66/12; (h) “Fire Marshall” means the person appointed as the Fire Marshall under clause 2(c) of the Fire Prevention Act; (i) “Holland College” means Holland College as established by subsection 2(1) of the Holland College Act R.S.P.E.I. 1988, Cap. H-6; (j) “home heat tank” means an aboveground petroleum storage tank that (i) has a capacity of 2200 litres or less, (ii) is installed in a fixed location, and (iii) is connected or intended to be connected to oil burning equipment; (k) “home heat tank system” means (i) a home heat tank, or c t Updated December 26, 2015 Page 3 Section 1 Environmental Protection Act Home Heat Tanks Regulations (ii) where two or more home heat tanks are connected in a system that has a total capacity of 2200 litres or less, those home heat tanks together with the piping connecting those home heat tanks; (k.1) “Home Heat Tank Systems Technical Standards Handbook” means the Home Heat Tank Systems Technical Standards Handbook published by the Department and dated June, 2011, as amended from time to time; (l) “identification tag” means an identification tag in a form approved by the Minister that is intended to be permanently affixed to a home heat tank; (m) “inside tank” means a home heat tank that is installed inside a building; (n) revoked by EC66/12; (o) “installer’s licence” means a home heat tank installer’s licence issued under subsection 3(2); (p) “licensee” means a person who holds a valid installer’s licence; (q) “manufacturer’s label” means a label by which a home heat tank manufacturer indicates compliance with the appropriate tank fabrication, and recognized testing agency standards; (r) “oil burning equipment” means equipment, an appliance or a fixture that uses petroleum for the purpose of generating heat, and includes a furnace, water heater, range and stove; (r.1) “oil filter canister” means a canister containing an oil filter device that is designed to be connected to the petroleum supply line from a home heat tank system to oil burning equipment; (s) “outside tank” means a home heat tank that is not installed inside a building; (t) “owner” means the person who owns, controls or manages a home heat tank system; (u) “permanently affixed” means affixed in such a way that an identification tag cannot be removed without destroying or rendering the identification tag as unusable; (v) “petroleum” means a mixture of petroleum hydrocarbons in liquid form, with or without additives, that is used or can be used as a combustible fuel for heating purposes; (w) “prior regulations” means the Petroleum Storage Tanks Regulations (EC322/01) made under the Act; (x) “product line protector” means a device that provides protection from accidental breakage for the shut-off valve and fuel filter assembly of a home heat tank; (y) “ULC” means Underwriters Laboratory of Canada; (z) “vent pipe” means a pipe that is installed on a home heat tank to vent petroleum vapours to the atmosphere. Application (2) These regulations apply to home heat tanks and home heat tank systems. Aboveground tanks (3) For the purposes of these regulations, (a) an inside tank is aboveground if 100% of the volume of the inside tank is installed above the lowest level of the building in which the tank is installed; and (b) an outside tank is aboveground if 100% of the volume of the outside tank is installed above the ground surface, Page 4 Updated December 26, 2015 t c Environmental Protection Act Home Heat Tanks Regulations Section 2 whether or not the piping associated with such tank is aboveground or underground. (EC241/07; 66/12) LICENCES 2. Fees The fees for an application for, or renewal of, a licence under these regulations shall be made payable to the Minister of Finance, Energy and Municipal Affairs. (EC241/07; 66/12) 3. Application for an installer’s licence (1) A person who wishes to install, alter or inspect home heat tanks or home heat tank systems shall apply for a home heat tank installer’s licence by (a) submitting a completed application to the Minister on a form approved by the Minister; (b) providing such proof of the matters referred to in subsection (2) and such other information as the Minister may require; and (c) paying the application fee of $50. Licence, qualifications (2) The Minister may, on receipt of an application, issue a home heat tank installer’s licence to an applicant if the Minister is satisfied that the applicant (a) holds, in respect of the trade of Oil Heat System Technician, Sheet Metal Worker, Refrigeration and Air Conditioning Mechanic or Plumber, (i) a valid Certificate of Qualification issued under the Apprenticeship and Trades Qualification Act R.S.P.E.I. 1988, Cap. A-15.1, or (ii) a valid certificate with an Interprovincial Standards Red Seal Endorsement issued by another province or a territory under the Canadian Council of Directors of Apprenticeship Interprovincial Standards (Red Seal) Program; (b) has completed either (i) a home heat tank installer’s course offered at (A) Holland College, (B) a community college outside the province that the Minister considers to be equivalent to Holland College, (C) a private training school registered under the Private Training Schools Act R.S.P.E.I. 1988, Cap. P-20.1, or (D) a private training school outside the province that the Minister considers to be equivalent to a private training school referred to in paragraph (C), or (ii) an industry-based training program that the Minister considers to be equivalent to a home heat tank installer’s course referred to in subclause (i); (c) is professionally competent as demonstrated by (i) holding a current installer’s licence or its equivalent in another jurisdiction in Canada, or (ii) the successful completion by the applicant of such examination as may be established and administered, adopted or accepted by the Minister; (d) has professional knowledge and skills that are current; and c t Updated December 26, 2015 Page 5 Section 3 Environmental Protection Act Home Heat Tanks Regulations (e) holds insurance satisfactory to the Minister (i) with coverage during the period of the licence for the licensee’s liability for bodily injury and property damage, including damages arising, during the period of the coverage, from a contaminant being introduced into the environment in a sudden, unintended or unexpected occurrence, and (ii) that provides that coverage may not be cancelled except on thirty days’ written notice to the Minister. Transitional (3) An installer’s licence issued under the prior regulations that was valid immediately before the date these regulations came into force is deemed to be an installer’s licence issued under subsection (2). Renewal (4) The Minister may, on application, renew an installer’s licence issued under subsection (2) to a person who holds the qualifications required by that subsection. Term, commencement and expiry (5) A installer’s licence shall be issued or renewed for a term that (a) commences on the later of (i) February 1 in any year that the installer’s licence is issued or renewed, and (ii) the date in any year on which the installer’s licence is issued or renewed; and (b) expires on January 31 of the second year following the year in which the licence is issued or renewed. Transitional, deemed extension (5.1) Notwithstanding subsection (5) as it read immediately before the day this subsection comes into force, an installer’s licence that is in effect on that day is deemed to expire on April 10, 2012, unless sooner revoked. Application of subsection (5.1) (5.2) Subsection (5.1) does not apply to an installer’s licence described in that subsection if, before April 10, 2012, (a) the person who holds the installer’s licence submits to the Minister proof satisfactory to the Minister that the person holds insurance of the type required under clause 3(2)(e) for the period commencing April 10, 2012 and ending on January 31, 2014; and (b) the Minister finds the insurance held by the person for that period to be satisfactory. Transitional, deemed extension (5.3) Notwithstanding subsection (5) as it read immediately before the day this subsection comes into force, where the Minister under subsection (5.2) finds the insurance held by the person who holds an installer’s license described in subsection (5.1) to be satisfactory, the installer’s licence is deemed to expire on January 31, 2014, unless sooner revoked. Notice (5.4) The Minister shall, by personal service or ordinary mail, give written notice to the person who makes a submission to the Minister under subsection (5.2) of (a) the Minister’s decision under that subsection; and Page 6 Updated December 26, 2015 t c Environmental Protection Act Home Heat Tanks Regulations Section 4 (b) if relevant, of the deemed expiry date of the installer’s license under subsection (5.3). (EC241/07; 66/12) 4. Application for an inspector’s licence (1) to (5) Revoked by EC66/12. (EC241/07; 66/12) 5. Revocation of licence (1) Where, in the opinion of the Minister, a licensee has contravened the Act or these regulations the Minister may revoke the installer’s licence held by the licensee. Notice of revocation (2) The Minister shall give written notice of the revocation of a licence under subsection (1) to the licensee by (a) personal service; or (b) by registered mail to the last known address of the licensee as shown in the records of the Minister. Service (3) A notice sent by registered mail under clause (2)(b) shall be deemed to be served on the licensee (a) on the date the licensee actually receives the notice; or (b) 5 days after the date on which the notice was mailed, whichever is earlier. (EC241/07; 66/12) 6. Inspection (1) A licensee who installs or alters a home heat tank system shall, immediately after completing the installation or alteration, carry out a home heat tank system inspection. Inspection requirements (2) A licensee who carries out a home heat tank system inspection shall comply with the requirements set out in the Home Heat Tank Systems Technical Standards Handbook. (EC241/07; 66/12) 7. Compliance with standards, etc. (1) A licensee who installs, alters or inspects a home heat tank system shall ensure that the home heat tank system, as installed, (a) complies with the standards and requirements in effect on the date of the installation, as established in (i) the Home Heat Tank Systems Technical Standards Handbook, (ii) the Water Well Regulations (EC188/90), (iii) CSA standard CSA B139-15, Installation Code for Oil-Burning Equipment for Residential and Small Commercial Buildings, as amended, (iv) ULC standard CAN/ULC-S642-07, Compounds and Tapes for Threaded Pipe Joints, (v) National Fire Code of Canada 1995 Revised 2010, as amended, c t Updated December 26, 2015 Page 7 Section 8 Environmental Protection Act Home Heat Tanks Regulations (vi) ULC standard CAN/ULC-S602-14, Aboveground Steel Tanks for Fuel Oil and Lubricating Oil, as amended, (vii) ULC standard CAN/ULC-S601-14 (R2015), Shop Fabricated Steel Aboveground Tanks for Flammable and Combustible Liquids, as amended, (viii) ULC standard CAN/ULC-S670-14, Standard for Aboveground Non-metallic Tanks for Fuel Oil and Other Combustible Liquids, as amended, and (ix) any other direction issued by the Minister; and (b) bears the manufacturer’s label. Metallic tank, codes (2) A licensee who installs, alters or inspects a home heat tank shall ensure that the home heat tank complies with the standards and requirements in effect on the date the home heat tank was constructed, and established in the following codes: (a) ULC standard CAN/ULC-S677-14, Standard for Fire Tested Aboveground Tank Assemblies for Flammable and Combustible Liquids, as amended; (b) ULC standard ULC/ORD-142.21 1995 Used-Oil Systems, Aboveground Storage Tanks for Flammable and Combustible Liquids, as amended; (c) ULC standard ULC-S601-14 (R2015), Standard for Shop Fabricated Steel Aboveground Horizontal Tanks for Flammable and Combustible Liquids, as amended; (d) ULC standard CAN/ULC-S602-14, Aboveground Steel Tanks for Fuel Oil and Lubricating Oil, as amended; (e) ULC standard CAN/ULC-S653-06, Standard for Aboveground Steel Contained Tank Assemblies for Flammable and Combustible Liquids, as amended; (f) ULC Standard CAN/ULC-S670-14, Standard for Aboveground Non-metallic Tanks for Fuel Oil and Other Combustible Liquids, as amended. Outside tank (3) No person shall install an outside tank unless the tank is constructed of a non-metallic material. Inside tank (4) No person shall install an inside tank unless the tank is (a) constructed of a non-metallic material; or (b) a double-bottom tank with a bottom outlet. Non-metallic material (5) No person shall, on or after July 1, 2020, install an inside tank unless the tank is constructed of a non-metallic material. Repeal (6) Subsection (4) is repealed on July 1, 2020. (EC241/07; 66/12; 778/15) 8. Notification, reports, submitted to Minister Revoked by EC66/12. (EC241/07; 66/12) Page 8 Updated December 26, 2015 t c Environmental Protection Act Home Heat Tanks Regulations Section 9 9. ID tags issued to employer (1) The Minister shall, at the written request of (a) a self-employed licensee; or (b) an employer who employs licensees, issue identification tags to such licensee or employer. Refusal to issue tags (2) The Minister may refuse to issue identification tags to a self-employed licensee or an employer of a licensee, if the Minister believes that the licensee or employer, as the case may be, has not submitted inspection reports as required by section 8. Assignment of ID tags by employer (3) An employer who is issued tags under subsection (1), (a) shall assign the identification tags only to employees who hold a valid installer’s; (b) shall maintain a record of which identification tags are assigned to each employee; and (c) may re-assign any identification tag to another employee who holds a valid installer’s. Records of id tags (4) A record of identification tags kept under clause (3)(b) shall be (a) maintained by a licensee or employer for at least two years from the date they are issued by the Minister; and (b) made available to an environment officer on the request of such officer. Return of ID tags by licensee whose licence expires (5) Every person whose installer’s licence has expired and has not been renewed, or has been revoked, by the Minister shall return all unused identification tags to the Minister within 10 working days from the date of expiry or revocation. Employer returns tags (6) An employer who no longer employs licensees shall return all unused identification tags to the Minister within 10 working days of ceasing to employ licensees. Identification tag not valid (7) An identification tag is not valid (a) unless the identification tag is permanently affixed to the vent pipe of a home heat tank, by riveting or another manner approved by the Minister; (b) if the identification tag has expired; (c) if the identification tag and any part of the home heat tank to which the identification tag is affixed are removed from the home heat tank system to which the identification tag relates; or (d) if the home heat tank system to which the identification tag relates is moved from the location at which the home heat tank system was inspected. Expiry of identification tag (8) An identification tag expires on June 30 of the expiry year, if any, stamped on the identification tag. (EC241/07; 66/12) c t Updated December 26, 2015 Page 9 Section 10 Environmental Protection Act Home Heat Tanks Regulations 10. Notice to Minister Where an identification tag is affixed to a home heat tank, and a licensee finds that the home heat tank or any part of the home heat tank system to which the identification tag relates does not meet the requirements of these regulations, the licensee shall, within one working day after making the finding, give written notice of the finding to the Minister. (EC241/07; 66/12) 11. Sale transfer of ID tags No person shall, except in accordance with subsection 9(3), (a) give or transfer an identification tag to another person; (b) sell an identification tag; or (c) alter, re-use, remove or attempt to alter, remove or re-use an identification tag that has been permanently affixed to a home heat tank system. (EC241/07) 12. Licence required to install (1) Subject to subsection (2), no person shall install, alter or remove any part of a home heat tank system unless the person holds an installer’s licence. Exception (2) An owner may install a product line protector or a fuel gauge protector on or near a home heat tank. (EC241/07) 12.1 Affixing identification tag (1) No person shall affix an identification tag to a home heat tank unless the person is a licensee. Idem (2) No licensee shall affix an identification tag to a home heat tank except in accordance with the Home Heat Tank Systems Technical Standards Handbook. (EC66/12) 13. Sale of home heat tanks (1) No person shall sell, or offer to sell, a home heat tank to any other person unless the other person holds a valid installer’s licence. Exception (2) Subsection (1) does not apply to a wholesaler who sells home heat tanks to a retailer for the purpose of resale. (EC241/07) 13.1 Sale of oil filter canister No person shall sell, or offer to sell, an oil filter canister unless (a) the person purchasing the oil filter canister is a licensee; and (b) the oil filter canister (i) is corrosion resistant, (ii) bears a manufacturer’s label confirming that the oil filter canister is corrosion resistant, if the oil filter canister is constructed of metallic material, and (iii) has an ethylene propylene diene M-class rubber gasket. (EC66/12) Page 10 Updated December 26, 2015 t c Environmental Protection Act Home Heat Tanks Regulations Section 14 14. Identification tag required (1) No person shall deliver petroleum to a home heat tank system unless (a) an identification tag is permanently affixed to the vent pipe of a home heat tank within the home heat tank system; and (b) the person has no reason to believe that the identification tag referred to in clause (a) is not valid, has been altered or was not issued by the Minister. End outlet or bottom outlet connection (2) Subject to subsection (4), no person shall deliver petroleum to an outside home heat tank system that has an end outlet or bottom outlet connection to oil burning equipment unless (a) a shut-off valve or fuel filter assembly is installed directly under the home heat tank system; or (b) the shut-off valve for the home heat tank system is equipped with a product line protector. Wooden tank stand (3) Subject to subsection (4), no person shall deliver petroleum to an outside home heat tank system that is supported by a wooden tank stand unless (a) the posts and saddle of the tank stand are constructed of pressure-treated wood that is 10.16 cm x 10.16 cm or 4 inches x 4 inches, or greater; (b) the cross pieces of the tank stand are constructed of pressure- treated wood that is 5.08 cm x 15.24 cm or 2 inches x 6 inches, or greater; and (c) the posts, saddle and cross pieces of the tank stand are bolted together using a nut and washer system. Exception (4) Where, immediately before the coming into force of this section, an outside home heat tank system is in use and (a) an identification tag is permanently affixed to the vent pipe of a home heat tank within the home heat tank system; and (b) there is no reason to believe that the identification tag is not valid, has been altered or was not issued by the Minister, subsections (2) and (3) do not apply in respect of the home heat tank system until the earlier of (c) the expiry of the identification tag; and (d) the removal of the tag under section 18. Notice to owner and Minister (5) Where a person attempting to deliver petroleum to a home heat tank system finds that the home heat tank system does not meet the requirements of this section, the person shall (a) give written notice to the owner of the home heat tank system, as soon as possible, that (i) the home heat tank system does not meet the requirements of this section, and (ii) the person is prohibited by these regulations from delivering petroleum to the home heat tank system; (b) where the person is employed by a petroleum supplier, notify the petroleum supplier, as soon as possible, of the person’s finding; and c t Updated December 26, 2015 Page 11 Section 14 Environmental Protection Act Home Heat Tanks Regulations (c) within one working day after the attempted delivery, give written notice of the person’s finding to the Minister. Duty of petroleum supplier (6) A petroleum supplier who receives a notification under clause (5)(b) shall ensure that written notice is given to the owner of the home heat tank system and the Minister in accordance with clauses (5)(a) and (c). (EC241/07; 740/07; 66/12) 14.1 Duty to check interstice monitoring system (1) A person who delivers petroleum to an outside double-bottom tank shall check the interstice monitoring system of the tank. Leak (2) Where a person referred to in subsection (1) finds that the interstice monitoring system of a double-bottom tank indicates a leak into the interstitial space, the person shall (a) complete the delivery of petroleum at the time of discovering the leak; (b) give written notice of the leak, as soon as possible, to the owner of the tank; (c) where the person is employed by a petroleum supplier, notify the petroleum supplier, as soon as possible, of the leak; and (d) within one working day after discovering the leak, give written notice of the leak to the Minister. Duty of petroleum supplier (3) A petroleum supplier who receives a notification under clause (2)(c) shall ensure that written notice is given to the owner of the double-bottom tank and the Minister in accordance with clauses (2)(b) and (d). (EC66/12) 14.2 Duty to check interstice monitoring system A person who conducts an annual oil-burning equipment maintenance inspection as required in CSA standard CSA B-139-15, Installation Code for Oil-Burning Equipment for Residential and Small Commercial Buildings, as amended, in respect of an inside double-bottom tank shall (a) check the interstice monitoring system of the tank; and (b) where the person finds that the interstice monitoring system of the tank indicates a leak into the interstitial space, give written notice of the leak, within one working day after the date of the maintenance inspection, to the owner of the tank and to the Minister. (EC66/12; 778/15) 14.3 Removal of identification tag The Minister shall, within seven days after receipt of notification of a leak into the interstitial space of a double-bottom tank under clause 14.1(2)(c) or 14.2(b), direct an environment officer to remove the identification tag affixed to the tank. (EC66/12) 14.4 Corrosion resistant oil filter canister Every person who conducts an annual oil-burning equipment maintenance inspection as required in CSA standard CSA B-139-15, Installation Code for Oil-Burning Equipment for Page 12 Updated December 26, 2015 t c Environmental Protection Act Home Heat Tanks Regulations Section 15 Residential and Small Commercial Buildings, as amended, in respect of a bottom outlet home heat tank shall (a) determine whether a corrosion resistant oil filter canister is connected to the petroleum supply line to the oil burning equipment; and (b) where a corrosion resistant oil filter canister is not connected to the petroleum supply line to the oil burning equipment, install a corrosion resistant oil filter. (EC66/12; 778/15) 15. Leaking tank (1) Every person who has reason to believe that petroleum is leaking or has leaked from a home heat tank system shall immediately (a) notify the owner of the home heat tank system; and (b) report the leak by telephoning the Canadian Coast Guard at 1-800-565-1633. Duty of owner (2) Upon receiving a notification under subsection (1), the owner shall immediately cause the system to be taken out of service until the home heat tank system is replaced or repaired in accordance with these regulations. (EC241/07) 16. Double-bottom metallic tank The owner of a double-bottom tank shall (a) ensure that the tank has an operational leak detecting device; and (b) immediately notify the Department if such device indicates that there is a petroleum leak within the interstitial space. (EC241/07; 66/12) 17. Access by environment officer At an environment officer’s request, the owner of a home heat tank system, and the owner or person in possession of the property on which the home heat tank system is located, shall permit access by the environment officer to the home heat tank system. (EC241/07) 18. Non-compliant home heat tank system (1) Where, in the opinion of an environment officer, a home heat tank system does not comply with these regulations, the environment officer may remove, or request an installer to remove, the identification tag and submit the identification tag to the Minister. Notice to owner (2) The Minister shall send written notification of the removal of the identification tag to the owner of the home heat tank system not later than the next working day following the day that the identification tag is received by the Minister. (EC241/07) 19. Expiry of identification tag Where an identification tag affixed to a home heat tank expires, the owner of the home heat tank system to which the identification tag relates shall arrange for a licensee to, before the end of the expiry year stamped on the identification tag, (a) replace the home heat tank system with a home heat tank system that meets the requirements of these regulations; c t Updated December 26, 2015 Page 13 Section 20 Environmental Protection Act Home Heat Tanks Regulations (b) replace any component of the home heat tank system necessary to ensure that the home heat tank system meets the requirements of these regulations; or (c) remove the home heat tank system in accordance with section 20. (EC241/07; 66/12) 20. Removal of tank (1) Where a home heat tank system is no longer in use, the owner of the home heat tank system shall arrange for a licensee to (a) ensure that all petroleum is removed from the home heat tank system; (b) disconnect all exposed piping or tubing from the home heat tank system; and (c) remove the fill and vent pipes and remove the home heat tank system from its location. Removal of fill and vent pipes (2) Where a home heat tank system is relocated, the owner of the home heat tank system shall arrange for a licensee to remove any fill and vent pipes that are no longer in use. Inaccessible home heat tank system (3) An environment officer may, in writing, waive the requirements of clause (1)(b) or (c) in respect of a home heat tank system, or a part of a home heat tank system, where (a) the home heat tank system is located inside a building or structure; and (b) an environment officer determines that the home heat tank system or part of the home heat tank system is inaccessible. Idem (4) Where an environment officer determines that a home heat tank system or part of a home heat tank system is inaccessible under clause (3)(b), the owner of the home heat tank system shall arrange for a licensee to: (a) ensure that all petroleum is removed from the home heat tank system; and (b) in respect of each home heat tank within the home heat tank system, (i) shut off the outlet valve, remove the filter, and plug or cap the outlet valve, and (ii) plug or cap appropriate openings, including the supply or return outlets or inlets, except for the vent pipe. (EC241/07; 66/12) 21. No water or sludge transfer from old tank Where a home heat tank is replaced by a licensee, the licensee performing the replacement shall ensure that no water or sludge contamination is transferred from the home heat tank system to the new tank. (EC241/07) 22. Forms Revoked by EC66/12. (EC241/07; 66/12) Page 14 Updated December 26, 2015 t c Environmental Protection Act Home Heat Tanks Regulations SCHEDULE SCHEDULE SCHEDULE A – FORMS Revoked by EC66/12. (EC241/07; 66/12) SCHEDULE B CONSTRUCTION STANDARDS FOR THE INSTALLATION OF ABOVEGROUND HOME HEAT TANK SYSTEMS Revoked by EC66/12. (EC241/07; 66/12) SCHEDULE C STANDARD FOR THE INSPECTION AND TAGGING OF HOME HEAT TANK SYSTEMS ON PEI WITH A TOTAL CAPACITY OF 2,200 LITRES OR LESS FOR HOME HEAT TANKS INSTALLED PRIOR TO MARCH 2004 Revoked by EC66/12. (EC241/07; 66/12) Schedule D MANDATORY REPLACEMENT YEARS FOR HOME HEAT TANKS (calculated from the year of manufacture) Revoked by EC66/12. (EC241/07; 66/12) c t Updated December 26, 2015 Page 15