AI-assisted research summary: The regulation classifies the listed goods under CN code 9021 10 90, and allows non-conforming binding tariff information to be relied on for three months after the regulation takes effect.
14.11.2014 | EN | Official Journal of the European Union | L 329/6 ---|---|---|--- * * * COMMISSION IMPLEMENTING REGULATION (EU) No 1213/2014 of 11 November 2014 concerning the classification of certain goods in the Combined Nomenclature THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (1), and in particular Article 9(1)(a) thereof, Whereas: (1) | In order to ensure uniform application of the Combined Nomenclature annexed to Regulation (EEC) No 2658/87, it is necessary to adopt measures concerning the classification of the goods referred to in the Annex to this Regulation. ---|--- (2) | Regulation (EEC) No 2658/87 has laid down the general rules for the interpretation of the Combined Nomenclature. Those rules apply also to any other nomenclature which is wholly or partly based on it or which adds any additional subdivision to it and which is established by specific provisions of the Union, with a view to the application of tariff and other measures relating to trade in goods. ---|--- (3) | Pursuant to those general rules, the goods described in column (1) of the table set out in the Annex should be classified under the CN code indicated in column (2), by virtue of the reasons set out in column (3) of that table. ---|--- (4) | It is appropriate to provide that binding tariff information issued in respect of the goods concerned by this Regulation which does not conform to this Regulation may, for a certain period, continue to be invoked by the holder in accordance with Article 12(6) of Council Regulation (EEC) No 2913/92 (2). That period should be set at three months. ---|--- (5) | The measures provided for in this Regulation are in accordance with the opinion of the Customs Code Committee, ---|--- HAS ADOPTED THIS REGULATION: Article 1 The goods described in column (1) of the table set out in the Annex shall be classified within the Combined Nomenclature under the CN code indicated in column (2) of that table. Article 2 Binding tariff information which does not conform to this Regulation may continue to be invoked in accordance with Article 12(6) of Regulation (EEC) No 2913/92 for a period of three months from the date of entry into force of this Regulation. Article 3 This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 11 November 2014. For the Commission, On behalf of the President, Heinz ZOUREK Director-General for Taxation and Customs Union * * * (1) OJ L 256, 7.9.1987, p. 1. (2) Council Regulation (EEC) No 2913/92 of 12 October 1992 establishing the Community Customs Code (OJ L 302, 19.10.1992, p. 1). * * * ANNEX Description of the goods | Classification (CN-code) | Reasons ---|---|--- (1) | (2) | (3) A cannulated, cylindrical, threaded product made of extra hard titanium alloy, of a length of between 20 to 56 mm. The product has a cannulated shank with an outer diameter of 4 mm and a head with a hexagonal drive. The shank is wholly threaded in 2 mm increments. The product corresponds to the ISO/TC 150 standards for implant screws and is presented for use in the field of trauma surgery for setting fractures. It is to be installed in the body using specific tools and by means of a guide wire, which is to be inserted in the cannulated shaft and which allows precise placement through a small incision in the body. At importation, it is presented in a sterilised packing. The product is marked with a number and therefore traceable throughout production and distribution. | 9021 10 90 | Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature, and by the wording of CN codes 9021 , 9021 10 and 9021 10 90 . Due to its objective characteristics, namely the presence of the cannulated shaft, the product does not entirely correspond to a screw of base metal. Consequently, it cannot be considered a part of general use (screw) as referred to in note 2 to Section XV. Therefore, classification under heading 8108 is excluded. The product is therefore to be classified under CN code 9021 10 90 as splints and other fracture appliances. * * *