COMMISSION IMPLEMENTING DECISION (EU) 2023/910

4.5.2023 | EN | Official Journal of the European Union | L 116/22 ---|---|---|--- * * * COMMISSION IMPLEMENTING DECISION (EU) 2023/910 of 3 May 2023 amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for corrugated bitumen tiles or sheets and other construction products (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (1), and in particular Article 22 thereof, Whereas: (1) | In accordance with Regulation (EU) No 305/2011, Technical Assessment Bodies are to use methods and criteria provided in European Assessment Documents, the references of which have been published in the Official Journal of the European Union, for assessing performance of construction products covered by those documents in relation to their essential characteristics. ---|--- (2) | In accordance with Article 19 of Regulation (EU) No 305/2011, following several requests by manufacturers for European Technical Assessments, the organisation of Technical Assessment Bodies has drawn up and adopted 25 European Assessment Documents. ---|--- (3) | The European Assessment Documents that have been drawn up and adopted by the organisation of Technical Assessment Bodies relate to the following construction products: | — | corrugated bitumen tiles and sheets; ---|--- — | liquid applied bridge deck waterproofing kits; ---|--- — | impact sound insulation mat with additional function of rainwater drainage and protection of external waterproofing layers; ---|--- — | pot bearings with special internal sealing for increased action effects; ---|--- — | kit for system stove - chimney consisting of chimney kit with clay/ceramic flue liner and integrated stove unit; ---|--- — | kits consisting of chimney flue liner, made of glass fibres, mineral and organic substances, additional components and ancillaries (superseding technical specification ‘EAD 060012-00-0802’); ---|--- — | construction product for penetration of walls and floors by components for conveying products of combustion; ---|--- — | bonded glazing kits and bonding sealants; ---|--- — | fluoraluminate rapid setting cement; ---|--- — | kit for reinforced concrete members with high strength reinforcing steel but limited tensile utilisation; ---|--- — | aggregate concrete masonry units with specific moisture conversion factor Fm; ---|--- — | building blocks made from bricks and cellular glass core; ---|--- — | thermally-insulating and loadbearing units made of cellular glass; ---|--- — | waterless odour trap for floor drains; ---|--- — | low bitumen mass shingles, laminated or not, with mineral or synthetic reinforcement; ---|--- — | polymer macro fibres reinforced with alkali resistant glass fibre for the use in concrete; ---|--- — | calcium carbonate filler aggregate with additional characteristics; ---|--- — | special mirrors; ---|--- — | joint sealing profile made of ethylene propylene diene monomer for the sealing of joints in tubbing constructions; ---|--- — | metal injection anchors for use in masonry (superseding technical specification ‘EAD 330076-00-0604’); ---|--- — | cast-in anchor bolts (superseding technical specification ‘EAD 330924-00-0601’); ---|--- — | wedge lock washers for structural bolting assemblies; ---|--- — | connector for strengthening of existing concrete structures by concrete overlay; ---|--- — | plastic chamber systems for underground network access applications installed below manhole tops; ---|--- — | kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of steel sheet with an intumescent coating or lining) and accessories (superseding technical specification ‘EAD 350003-00-1109’). ---|--- (4) | The European Assessment Documents that have been drawn up and adopted by the organisation of Technical Assessment Bodies satisfy the demands to be met in relation to the basic requirements for construction works set out in Annex I to Regulation (EU) No 305/2011. It is therefore appropriate to publish the references to those European Assessment Documents in the Official Journal of the European Union. ---|--- (5) | The list of references to European Assessment Documents for construction products is published pursuant to Commission Implementing Decision (EU) 2019/450 (2). For reasons of clarity, references to new European Assessment Documents should be added to that list. ---|--- (6) | Implementing Decision (EU) 2019/450 should therefore be amended accordingly. ---|--- (7) | In order to enable the use of the European Assessment Documents as early as possible, this Decision should enter into force on the day of its publication, ---|--- HAS ADOPTED THIS DECISION: Article 1 The Annex to Implementing Decision (EU) 2019/450 is amended in accordance with the Annex to this Decision. Article 2 This Decision shall enter into force on the day of its publication in the Official Journal of the European Union. Done at Brussels, 3 May 2023. For the Commission The President Ursula VON DER LEYEN * * * (1) OJ L 88, 4.4.2011, p. 5. (2) Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (OJ L 77, 20.3.2019, p. 78). * * * ANNEX In the Annex, the following rows are inserted in sequential order following the order of the reference numbers: ‘030016-00-0402 | Corrugated bitumen tiles and sheets’ ---|--- ‘030675-00-0107 | Liquid applied bridge deck waterproofing kits’ ‘040708-00-0402 | Impact sound insulation mat with additional function of rainwater drainage and protection of external waterproofing layers’ ‘050003-00-0301 | Pot bearings with special internal sealing for increased action effects’ ‘060009-00-0802 | Kit for system stove - chimney consisting of chimney kit with clay/ceramic flue liner and integrated stove unit’ ‘060012-01-0802 | Kits consisting of chimney flue liner, made of glass fibres, mineral and organic substances, additional components and ancillaries (superseding technical specification ‘EAD 060012-00-0802’)’ ‘060014-00-0802 | Construction product for penetration of walls and floors by components for conveying products of combustion’ ‘090010-00-0404 | Bonded glazing kits and bonding sealants’ ‘150036-00-0301 | Fluoraluminate rapid setting cement’ ‘160011-00-0301 | Kit for reinforced concrete members with high strength reinforcing steel but limited tensile utilisation’ ‘170006-00-0305 | Aggregate concrete masonry units with specific moisture conversion factor Fm’ ‘170012-00-0404 | Building blocks made from bricks and cellular glass core’ ‘170018-00-0305 | Thermally-insulating and loadbearing units made of cellular glass’ ‘180020-00-0704 | Waterless odour trap for floor drains’ ‘220020-00-0402 | Low bitumen mass shingles, laminated or not, with mineral or synthetic reinforcement’ ‘260024-00-0301 | Polymer macro fibres reinforced with alkali resistant glass fibre for the use in concrete’ ‘260048-00-0301 | Calcium carbonate filler aggregate with additional characteristics’ ‘300007-00-0404 | Special mirrors’ ‘320014-00-0605 | Joint sealing profile made of ethylene propylene diene monomer for the sealing of joints in tubbing constructions’ ‘330076-01-0604 | Metal injection anchors for use in masonry (superseding technical specification ‘EAD 330076-00-0604’)’ ‘330924-01-0601 | Cast-in anchor bolts (superseding technical specification ‘EAD 330924-00-0601’)’ ‘331565-00-0602 | Wedge lock washers for structural bolting assemblies’ ‘332347-00-0601 | Connector for strengthening of existing concrete structures by concrete overlay’ ‘340225-00-1109 | Plastic chamber systems for underground network access applications installed below manhole tops’ ‘350003-01-1109 | Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of steel sheet with an intumescent coating or lining) and accessories (superseding technical specification ‘EAD 350003-00-1109’)’ * * *