COMMISSION REGULATION (EC) No 1493/2007

18.12.2007 | EN | Official Journal of the European Union | L 332/7 ---|---|---|--- * * * COMMISSION REGULATION (EC) No 1493/2007 of 17 December 2007 establishing, pursuant to Regulation (EC) No 842/2006 of the European Parliament and of the Council, the format for the report to be submitted by producers, importers and exporters of certain fluorinated greenhouse gases THE COMMISSION OF THE EUROPEAN COMMUNITIES, Having regard to the Treaty establishing the European Community, Having regard to Regulation (EC) No 842/2006 of the European Parliament and of the Council of 17 May 2006 on certain fluorinated greenhouse gases (1), and in particular Article 6(2) thereof; Whereas: (1) | The data to be submitted by the importers and producers should include estimates of quantities of fluorinated greenhouse gases expected to be used in the main applications, including the quantities expected to be used as feedstock, in order to provide additional information for the Commission and the Member States with the objective of acquiring emission data for the relevant sectors. ---|--- (2) | Producers purchase and sell fluorinated greenhouse gases from and to other producers for commercial reasons and in these cases only the purchasing producer can report on the quantities of those substances expected to be used in the main applications. ---|--- (3) | Stakeholders have been consulted on the format of the report and their experience in reporting under Regulation (EC) No 2037/2000 of the European Parliament and of the Council of 29 June 2000 on substances that deplete the ozone layer (2) has been taken into account. ---|--- (4) | The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 18(1) of Regulation (EC) No 2037/2000, ---|--- HAS ADOPTED THIS REGULATION: Article 1 The format of the report referred to in Article 6(1) of Regulation (EC) No 842/2006 is set out in the Annex to this Regulation. Article 2 This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 17 December 2007. For the Commission Stavros DIMAS Member of the Commission * * * (1) OJ L 161, 14.6.2006, p. 1. (2) OJ L 244, 29.9.2000, p. 1. Regulation as last amended by Commission Decision 2007/540/EC (OJ L 198, 31.7.2007, p. 35). * * * ANNEX REPORTING FORM FOR PRODUCERS, IMPORTERS AND EXPORTERS OF FLUORINATED GREENHOUSE GASES PART 1 Text of image INTRODUCTION Article 6 of Regulation (EC) No 842/2006 on certain fluorinated greenhouse gases requires that producers, importers, and exporters of fluorinated greenhouse gases report certain activities to the European Commission annually, beginning in 2008 (for activities occurring during 2007). The following form is to be completed by producers, importers, and exporters in the European Community who produce, import, and/or export more than one metric tonne of fluorinated greenhouse gases, or preparations containing fluorinated greenhouse gases, per annum. Quantities imported or exported shall include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Reported imports and exports of fluorinated greenhouse gases should include only those quantities imported from or exported to countries outside the Community. Similarly, Regulation (EC) No 842/2006 does not require importers to report on quantities purchased from Community producers or distributors, or on stockpiled quantities originally obtained from Community producers or distributors. Companies that produce and capture more than one tonne of fluorinated greenhouse gases as a by-product of other chemical production (e.g., production of HFC-23 from the manufacture of HCFC-22) are responsible for completing this form to account for captured fluorinated greenhouse gases; by- products that are emitted and not captured do not need to be reported in this form. CONFIDENTIALITY All information provided in this report shall be considered strictly confidential. No company-specific information shall be disclosed to the public; all company data shall be aggregated into summary reports before being made available to the public. Any concerns regarding confidentiality can be addressed to the Commission or to the entity designated by the Commission. INSTRUCTIONS Complete all applicable parts of this form to account for activities occurring during the previous calendar year (i.e., activities conducted in 2007 shall be reported and submitted in 2008, no later than 31 March). For your reference, definitions that may be helpful for completing the forms and a listing of the regulated fluorinated greenhouse gases with corresponding CAS numbers are provided in Part 2. Note that reporting is normally done at the company level (not the facility level). Submission Once completed, this report must be submitted by 31 March of the year following the year for which the report applies. The report shall be submitted to the Commission or to the entity designated by the Commission and to the competent authority in your Member State. PART 2 Text of image Definitions Fluorinated greenhouse gases: hydrofluorocarbons (HFCs), perfluorocarbons (PFCs) and sulphur hexafluoride (SF6) as listed in Annex I of Regulation (EC) No 842/2006 and preparations containing those substances, but excluding substances controlled under Regulation (EC) No 2037/2000 on substances that deplete the ozone layer. Preparation (industry often refers to preparations as blends): A mixture composed of two or more substances at least one of which is a fluorinated greenhouse gas, except where the total global warming potential of the preparation is less than 150. The total global warming potential of the preparation shall be determined in accordance with Part 2 of Annex I of Regulation (EC) No 842/2006 on certain fluorinated greenhouse gases. Placing on the market: For the purposes of these reporting forms, placing on the market means the supplying of or making available to a third party within the Community for the first time, against payment or free of charge, bulk quantities of fluorinated greenhouse gases, and includes import into the customs territory of the Community excluding those contained in equipment. Community co-producer: A producer of fluorinated greenhouse gases in the Community with whom another producer may conduct transactions (i.e., sales and purchases of fluorinated greenhouse gases). Feedstock: Any substance that undergoes chemical transformation in a process by which the chemical is entirely converted from its original composition and whose emissions are insignificant. Reclamation: The reprocessing of a recovered fluorinated greenhouse gas in order to meet a specified standard of performance. Recycling: The reuse of a recovered fluorinated greenhouse gas following a basic cleaning process. Destruction: The process by which all or most of a fluorinated greenhouse gas is permanently transformed or decomposed into one or more stable substances which are not fluorinated greenhouse gases. Note: Production of a fluorinated greenhouse gas preparation refers to the production of the preparation constituents, not to the blending process Reporting on production of fluorinated greenhouse gas by-product This form should not be used to report emissions of fluorinated greenhouse gas by-products that result from the manufacture of other chemicals (e.g., emissions of HFC-23 from the manufacture of HCFC-22); do not report on by- product fluorinated greenhouse gas production that is emitted directly to the atmosphere. However, companies that produce fluorinated greenhouse gases as a by-product of other chemical production and capture the by-product fluorinated greenhouse gases produced are responsible for completing this form to account for the captured by-product fluorinated greenhouse gases, which are considered as new production. Text of image Fluorinated greenhouse gases covered by Regulation (EC) No 842/2006 The table below lists the regulated fluorinated greenhouse gases and their corresponding Chemical Abstract Service (CAS) numbers. For the Combined Nomenclature (CN8) of regulated fluorinated greenhouse gases, refer to the current regulation, published no later than 31 October of the year before the year to which it applies, available at: http://europa.eu.int/eur- lex/lex/en/index.htm Regulated fluorinated greenhouse gases Chemical formula CAS No Sulphur hexafluoride SF6 2551-62-4 Hydrofluorocarbons (HFCs): HFC-23 CHF3 75-46-7 HFC-32 CH2F2 75-10-5 HFC-41 CH3F 593-53-3 HFC-43-10mee C5H2F10 138495-42-8 HFC-125 C2HF5 354-33-6 HFC-134 C2H2F4 359-35-3 HFC-134a CH2FCF3 811-97-2 HFC-152a C2H4F2 75-37-6 HFC-143 C2H3F3 430-66-0 HFC-143a C2H3F3 420-46-2 HFC-227ea C3HF7 431-89-0 HFC-236cb CH2FCF2CF3 677-56-5 HFC-236ea CHF2CHFCF3 431-63-0 HFC-236fa C3H2F6 690-39-1 HFC-245ca C3H3F5 679-86-7 HFC-245fa CHF2CH2CF3 460-73-1 HFC-365mfc CF3CH2CF2CH3 406-58-6 Perfluorocarbons (PFCs): Perfluoromethane CF4 75-73-0 Perfluoroethane C2F6 76-16-4 Perfluoropropane C3F8 76-19-7 Perfluorobutane C4F10 355-25-9 Perfluoropentane C5F12 678-26-2 Perfluorohexane C6F14 355-42-0 Perfluorocyclobutane c-C4F8 115-25-3 PFC preparations or HFC preparations Variable Variable PART 3 Text of image Company contact information Company name: Date of Submission: Company address: Transaction year (Year to which this report applies): Postal code: Country: Contact person: Phone No: Fax No: Email address: I certify that I am the authorised representative for this company and have personally examined and am familiar with the information submitted in this and all attached documents. To the best of my knowledge, all information submitted is true, accurate, and complete. Fluorinated greenhouse gas transaction(s) Reporting is required for any entity that has produced, imported, and/or exported more than one metric tonne of fluorinated greenhouse gases, or preparations containing fluorinated greenhouse gases, per annum. Select the fluorinated greenhouse gas transaction type(s) conducted during this reporting period. For fluorinated greenhouse gas production and/or import, also indicate fluorinated greenhouse gas type(s) produced/imported. Production HFCs PFCs SF6 Import HFCs/HFC preparations PFCs/PFC preparations SF6 Export Based on the fluorinated greenhouse gas types and transactions types indicated above, complete all relevant reporting forms attached. PART 4 Text of image Reporting HFC production and import data Five forms are available for reporting HFC production and import data, as described below. Determine which forms apply to your company and complete as appropriate. Producer and Importer Form 1: HFCs This form should be used to report on the production and/or import of HFCs, including those used to produce preparations. Constituents of HFC preparations that were produced or imported as a substance and blended or imported as a preparation and re-blended should also be reported on this form. Only the most common HFCs are included on this form. Note: If your company imported or purchased preparations that you did not re-blend, report those substances on Form 3. If your company imported or produced HFCs or HFC preparations that are not listed on this form, proceed to Form 2. Co-Producer Form 1 (only for producers) Use this form to itemise co-producer transactions of the common HFCs. Ensure that the totals are the same as those reported on Producer and Importer Form 1. Producer and Importer Form 2: Other HFCs This form should be used to report on other HFCs not listed on Form 1. Constituents of HFC preparations produced or imported as a substance and blended or imported as a preparation and re-blended by your company should also be reported on this form. Note: If your company imported or purchased preparations that you did not re-blend, report those substances on Form 3. Co-Producer Form 2 (only for producers) Use this form to itemize co-producer transactions of other HFCs not listed on Co-Producer Form 1. Ensure that the totals are the same as those reported on Producer and Importer Form 2. Importer Form 3: HFC preparations (only for importers) This form should be used to report on imports of HFC preparations that your company did not re-blend. Note: If your company imported HFCs for use in preparations, report those substances on Form 1 and/or Form 2. If your company imported HFC preparations and re-blended them, report those substances on Form 1 and/or Form 2. Text of image Producer and Importer Form 1: HFCs Complete the table as appropriate to account for all transactions (in metric tonnes) of HFCs for this reporting period. Producers of HFC preparations should use this form to report on each preparation constituent. (Refer to the introductory information of Part 4 for more complete instructions.) For HFCs not listed in this table, proceed to Form 2. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ‘Unknown’, provide further explanation in the space below this table. Refer to Part 2 for definitions of terms. Transactions/(metric tonnes) HFC-32 HFC-125 HFC-134a HFC-143a HFC-152a HFC-227ea HFC-245fa HFC-365mfc HFC-43-10mee A Total new production from your facility/ies B Amount imported into the Community C Amount exported for sale outside the Community D Other amounts collected for reclamation or destruction from within the Community Transactions for producers only E Purchases from Community co-producers F Sales to Community co-producers G Amount purchased from other Community sources Stockpiles held during reporting year (a) H Stocks held at 1 January I Stocks held at 31 December Reclamation, destruction, and feedstock use J Amount reclaimed by your company K Amount destroyed by your company (on-site) L Amount destroyed on your behalf (off-site within the Community) M amount used as a feedstock by your company Net amount available for sale in the Community N Calculated total (A+B-C+D+E-F+G+H-I-K-L-M) Intended applications of amounts placed on Community market for the first time (best estimates) (b) O Refrigeration and air-conditioning P Fire protection Q Aerosols R Solvents S Foams T Feedstock U Other or unknown (c) V Total amount placed on the Community market (b) (O+P+Q+R+S+T+U) W Total sold (C+F+N) (a) Importers should only report on imported quantities held in stocks, i.e. not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source. (b) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row V should equal row N; for producers, row V should equal row N minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years. (c) Identify other application(s) in the space below. If intended application is unknown, explain why. Text of image Description of ‘Other’ and/or explanation of ‘Unknown’ Intended Application(s). Specify fluorinated greenhouse gas type, if intended application of more than one fluorinated greenhouse gas is marked as ‘Other’ or ‘Unknown’. Co-producer Form 1: HFCs Complete the table to account for all co-producer transactions (in metric tonnes) of HFCs for this reporting period. For HFCs purchased or sold as constituents of preparations, report on each HFC component of the preparation separately. Refer to the introductory information of Part 4 for more complete instructions, and to Part 2 for definitions of terms. Company name/(metric tonnes) HFC-32 HFC-125 HFC-134a HFC-143a HFC-152a HFC-227ea HFC-245fa HFC-365mfc HFC-43-10mee Purchases from Community co-producers 1 2 3 4 5 6 7 8 9 Total Sales to Community co-producers 1 2 3 4 5 6 7 8 9 Total Text of image Producer and Importer Form 2: Other HFCs Complete the table as appropriate to account for all transactions (in metric tonnes) of HFCs for this reporting period. Producers of preparations should use this form to report on each preparation constituent. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ’Unknown’, provide further explanation in the space below this table. This table should not be used to report emissions of HFC-23 from the manufacture of HCFC-22. Refer to the introductory information of Part 4 for more complete instructions, and to Part 2 for definitions of terms. Transactions/(metric tonnes) HFC-23 (a) HFC-41 HFC-134 HFC-143 HFC-236cb HFC-236ea HFC-236fa HFC-245ca Other HFCs (Specify) Name Name A Total new production from your facility/ies B Amount imported into the Community C Amount exported for sale outside the Community D Other amounts collected for reclamation or destruction from within the Community Transactions for producers only E Purchases from Community co-producers F Sales to Community co-producers G Amount purchased from other Community sources Stockpiles held during reporting year (b) H Stocks held at 1 January I Stocks held at 31 December Reclamation, destruction, and feedstock use J Amount reclaimed by your company K Amount destroyed by your company (on-site) L Amount destroyed on your behalf (off-site within the Community) M Amount used as a feedstock by your company Text of image Net amount available for sale in the Community N Calculated total (A+B-C+D+E-F+G+H-I-K-L-M) Intended applications of amounts placed on Community market for the first time (best estimates) (c) O Refrigeration and air-conditioning P Fire protection Q Aerosols R Solvents S Foams T Feedstock U Other or unknown (d) V Total amount placed on the Community market (c) (O+P+Q+R+S+T+U) W Total sold (C+F+N) (a) This form should not be used to report emissions of HFC-23 from the manufacture of HCFC-22. (b) Importers should only report on imported quantities held in stocks, i.e., not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source. (c) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row V should equal row N; for producers, row V should equal row N minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years. (d) Identify other application(s) in the space below. If intended application is unknown, explain why. Description of ‘Other’ and/or explanation of ‘Unknown’ Intended Application(s). Specify fluorinated greenhouse gas type, if intended application of more than one fluorinated greenhouse gas is marked as ‘Other’ or ‘Unknown’. Text of image Co-Producer Form 2: Other HFCs Complete the table to account for all co-producer transactions (in metric tonnes) of HFCs for this reporting period. For HFCs purchased or sold as constituents of preparations, report on each HFC component of the preparation separately. Refer to the introductory information of Part 4 for more complete instructions, and to Part 2 for definitions of terms. Company Name/(metric tonnes) HFC-23 (*) HFC-41 HFC-134 HFC-143 HFC-236cb HFC-236ea HFC-236fa HFC-245ca Other HFCs (Specify) Name Name Purchases from Community co-producers 1 2 3 4 5 6 7 8 9 Total Sales to Community co-producers 1 2 3 4 5 6 7 8 9 Total Text of image Importer Form 3: HFC preparations* * Not including preparations re-blended by your company Complete the table as appropriate to account for all transactions (in metric tonnes) of HFC preparations for this reporting period. Do not use this form to report on preparations that you produced or re-blended. If the types of HFC preparations imported by your company are not listed in the table below, use the blank columns to identify and report on additional preparation types (and be sure to indicate composition). For preparations that also contain PFCs, report quantities on either the PFC Producer and Importer form or this form; do not duplicate information. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre- charged equipment). Importers that also purchase from Community producers or distributors are not responsible for reporting those quantities. Refer to the introductory information of Part 4 for more complete instructions, and to Part 2 for definitions of terms. Transactions/(metric tonnes) R-404a R-407c R-410a R-507 Other HFC preparations (specify name and composition) (a) Name Name A Amount imported into the Community B Amount exported for sale outside the Community C Other amounts collected for reclamation or destruction from within the Community Stockpiles held during reporting year (b) D Stocks held at 1 January E Stocks held at 31 December Reclamation, destruction, and feedstock use F Amount reclaimed by your company G Amount destroyed by your company (on-site) H Amount destroyed on your behalf (off-site within the Community) I Amount used as a feedstock by your company Net amount available for sale in the Community J Calculated Total (A-B+C+D+E-E-F-G-H) Intended applications of amounts placed on Community market for the first time (best estimates) K Refrigeration and air-conditioning L Fire protection M Aerosols N Solvents O Foams P Feedstock Q Other or unknown (c) R Total amount placed on the Community market (d) (K+L+M+N+O+P+Q) S Total Sold (B+J) (a) Indicate the preparation composition for each HFC preparation added to the table in the space below this table. For preparations that also contain PFCs, report quantities on either the PFC Producer and Importer form or this form; do not duplicate information. (b) Importers should only report on imported quantities held in stocks, i.e., not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source. (c) Identify other application(s) in the space below this table. If intended application is unknown, explain why. (d) Total in row R should equal total in row J. Preparation composition for each HFC preparation added to the table (e.g., R-404a: 44 % HFC-125, 4 % HFC-134a, 52 % HFC-143a). Description of ‘Other’ and/or explanation of ‘Unknown’ Intended Application(s). Specify fluorinated greenhouse gas type, if intended application of more than one fluorinated greenhouse gas is marked as ‘Other’ or ‘Unknown’. PART 5 Text of image Producer and Importer Form: SF6 Complete the table as appropriate to account for all transactions (in metric tonnes) of SF6 for this reporting period. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ‘Unknown’, provide further explanation in the space below this table. Refer to Part 2 for definitions of terms. Transactions/(metric tonnes) Sulphur Hexafluoride (SF6) A Total new production from your facility/ies B Amount imported into the Community C Amount exported for sale outside the Community D Other amounts collected for reclamation or destruction from within the Community Transactions for producers only E Purchases from Community co-producers F Sales to Community co-producers G Amount purchased from other Community sources Stockpiles held during reporting year (a) H Stocks held at 1 January I Stocks held at 31 December Reclamation and destruction J Amount reclaimed by your company K Amount destroyed by your company (on-site) L Amount destroyed on your behalf (off-site within the Community) Net amount available for sale in the Community M Calculated total (A+B–C+D+E–F+G+H-I-K-L) Intended applications of amounts placed on Community market for the first time (best estimates) (b) N Electrical equipment O Magnesium die casting operations P Semiconductor manufacture Q Other or unknown (c) R Total amount placed on the Community market (b) (N+O+P+Q) S Total Sold (C+F+M) (a) Importers should only report on imported quantities held in stocks, i.e., not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source. (b) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row R should equal row M; for producers, row R should equal row M minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years. (c) Identify other application(s) in the space below this table. If intended application is unknown, explain why. Description of ‘Other’ and/or explanation of ‘Unknown’ intended application(s). Text of image Co-Producer Form: SF6 Complete the table to account for all co-producer transactions (in metric tonnes) of SF6 for this reporting period. Refer to Part 2 for definitions of terms. Company name/(metric tonnes) Sulphur hexafluoride (SF6) Purchases from Community co-producers 1 2 3 4 5 6 7 Total Sales to Community co-producers 1 2 3 4 5 6 7 Total PART 6 Text of image Producer and Importer Form: PFCs Complete the table to account for all transactions (in metric tonnes) of PFCs for this reporting period. If the types of PFCs/PFC preparations produced/imported by your company are not listed in the table below, use the blank columns to identify and report on additional types (and be sure to indicate composition of preparations). For PFC preparations that your company produced, report on each PFC constituent individually. Report by preparation type only if you imported the preparation and did not re-preparation it. For preparations that also contain HFCs, report quantities on either the HFC Producer and Importer form or this form; do not duplicate information. Quantities imported or exported should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Importers that also purchase from Community producers or distributors, or stockpile quantities purchased from Community producers or distributors, are not responsible for reporting those amounts. If the intended application is ‘Other’ or ‘Unknown’, provide further explanation in the space below this table. Transactions/(metric tonnes) Perfluoromethane (CF4) Perfluoroethane (C2F6) Perfluoropropane (C3F8) Perfluorobutane (C4F10) Perfluoropentane (C5F12) Perfluorohexane (C6F14) Perfluorocyclobutane (c–C4F8) Other PFC/PFC preparations (a) (specify name and composition) (b) Name Name A Total new production from your facility/ies B Amount imported into the Community C Amount exported for sale outside the Community D Other amounts collected for reclamation or destruction from within the Community Transactions for producers only E Purchases from Community co-producers F Sales to Community co-producers G Amount purchased from other Community Sources Stockpiles held during reporting year (c) H Stocks held at 1 January I Stocks held at 31 December Reclamation and destruction J Amount reclaimed by your company K Amount destroyed by your company (on-site) L Amount destroyed by your company (off-site within the Community) Net amount available for sale in the Community M Calculated total (A+B-C+D+E-F+G+H-I-K-L) Text of image Intended applications of amounts placed on Community market for the first time (best estimates) (d) N Solvents O Semiconductor manufacture P Other or unknown (e) Q Total amount placed on the Community market (d) (N+O+P) R Total sold (C+F+M) (a) Only report on preparation types if your company did not create or re- blend the preparation; for preparations that were produced, report on each PFC constituent. (b) If reporting on PFC preparations, indicate the preparation composition for each preparation added to the table in the space below. For preparations that also contain HFCs, report quantities on either the HFC Producer and Importer form or this form. (c) Importers should only report on imported quantities held in stocks, i.e., not on stockpiled quantities originally obtained from Community producers or distributors (best estimates where appropriate). Producers should report all stockpiled quantities regardless of source. (d) Total amount placed on the Community market does not include any quantities previously held by Community importers and/or distributors. Therefore, for importers, row Q should equal row M; for producers, row Q should equal row M minus any quantities sold on the Community market that were previously purchased from Community importers/distributors in this reporting year or in previous years. (e) Identify other application(s) in the space below this table. If intended application is unknown, explain why. Producer and Importer Form: PFCs (Continued) Preparation composition for each PFC preparation added to the table (e.g., R-508a: 61 % Perfluoroethane, 39 % HFC-23). Description of ‘Other’ and/or explanation of ‘Unknown’ Intended Application(s). Specify fluorinated greenhouse gas type, if intended application of more than one fluorinated greenhouse gas is marked as ‘Other’ or ‘Unknown’. Text of image Co-Producer Form: PFCs Complete the table to account for all co-producer transactions (in metric tonnes) of PFCs for this reporting period. For PFCs purchased or sold as constituents of preparations, report on each PFC component of the preparation separately. Refer to Part 2 for definitions of terms. Company Name/(metric tonnes) Perfluoromethane (CF4) Perfluoroethane (C2F6) Perfluoropropane (C3F8) Perfluorobutane (C4F10) Perfluoropentane (C5F12) Perfluorohexane (C6F14) Perfluorocyclobutane (c–C4F8) Other PFCs (Specify) Name Name Purchases from Community co-producers 1 2 3 4 5 6 7 8 Total Sales to Community co-producers 1 2 3 4 5 6 7 8 Total PART 7 Text of image Exporter Form (all fluorinated greenhouse gas types) Complete sections 1 and 2 to account for all quantities of fluorinated greenhouse gases exported outside of the Community during the calendar year for which this form is being submitted. Use the blank rows to report on fluorinated greenhouse gases not listed, including any preparations. For preparations that contain both HFC and PFC components, report quantities as HFC preparations or PFC preparations; do not duplicate information. Quantities should include bulk shipments, including those shipped with equipment for the purpose of charging that equipment, but not quantities contained in equipment (i.e., pre-charged equipment). Refer to Part 2 for definitions of terms. Section 1. Export totals (metric tonnes) Section 2. Total amount exported for recycling, reclamation and/or destruction (metric tonnes) Fluorinated greenhouse gas type Annual total exported from the European Community Recycling Reclamation Destruction SF6 SF6 HFCs HFC-23 HFC-32 HFC-41 HFC-43-10mee HFC-125 HFC-134 HFC-134a HFC-152a HFC-143 HFC-143a HFC-227ea HFC-236cb HFC-236ea HFC-236fa HFC-245ca HFC-245fa HFC-365mfc Other: Other: HFC preparations* R-404a R-407c R-410a R-507 Other: Other: PFCs/PFC preparations Perfluoromethane Perfluoroethane Perfluoropropane Perfluorobutane Perfluoropentane Perfluorohexane Perfluorocyclobutane Other: Other: (*) Indicate the preparation composition for each preparation added to the table in the space below. Indicate the preparation composition for each preparation added to the table (e.g., R-404a: 44 % HFC-125, 4 % HFC-134a, 52 % HFC-143a). If you indicated the components of these preparations on a previous form (i.e., HFC Producer and Importer), you do not need to restate them here. * * *