Owners of premises used for certain listed processes must give the Authority a written notice about the existence of the premises, using the particulars and information required by Schedule 2.
Air Pollution Control (Specified Processes) (Specification of Required Particulars and Information) Order 1994(Cap. 311, section 19(1))(Enacting provision omitted—E.R. 1 of 2023)[26 August 1994](Format changes—E.R. 1 of 2023) 1. Notice of existing premises used for specified processes The owner of premises used for the conduct of any of the specified processes listed in Schedule 1 shall give to the Authority a written notice, containing the particulars and information specified in the form set out in Schedule 2, of the existence of the premises. 2. (Omitted as spent—E.R. 1 of 2023) Schedule 1 [s. 1]Specified Processes 1. Organic Chemical Works2. Zinc Galvanising Works3. Rendering Works4. Non-ferrous Metallurgical Works5. Glass Works Schedule 2 [s. 1]Form Air Pollution Control Ordinance (Chapter 311) NOTIFICATION OF THE EXISTENCE OF PREMISES USED FOR THE CONDUCTOF A SPECIFIED PROCESS PURSUANT TO SECTION 19(1) To: The Authority 1. I/We* the undersigned, being the owner/owners* specified in paragraph 2 of the undermentioned premises, hereby give notice that the premises described in paragraph 3 are used for the conduct of the process specified in paragraph 4 and declare that the particulars and information furnished hereunder are correct. This notification consists of . pages, with associated drawing (. sheets). Signature: Name: Date: 2. Details of Owner(s) Name(s) of Owner(s)(Surname first) Status(e.g. lessee, occupier) Correspondence Address Telephone Number Identity Card/Certificate ofIncorporation* Number English Chinese 3. Premises where the Specified Process is Conducted Name of Premises Address TelephoneNumber English Chinese Contact Person in thePremises (Surname first) Title or Position Correspondence Address TelephoneNumber English Chinese BusinessRegistration No. Certificate ofIncorporation No. No. of Employeesin the Premises Area of thePremises (m2) LandStatus Name(s) of Land Owner(s) Address TelephoneNumber English Chinese 4. Nature of Work Specified Process referred in Schedule 1 to the Ordinance Brief Descriptionof Process Raw materials withPercentage Composition Products withPercentage Composition Raw Materials Consumption Rates (tonnes) Hourly Normal Product Production Rates (tonnes) Hourly Normal Maximum Maximum Daily Daily Monthly Monthly Annual Annual Installed/Processing* Capacity Total Storage Capacity of the Tanks used to storeOrganic Liquids (For Organic Chemical Works Only) Operating Schedule Normal Operating Hours From To Operating Hours per Day Operating Days per Year 5. Particulars of the Emission Points and Associated Equipment A. Emission Point where Air Pollutant is Emitted Emission Point No. Discharge Exit or Chimney Height (m above ground) Cross-section of DischargeExit or Chimney Width (m) Length (m) Diameter (m) B. Associated Equipment from which the Air Pollutant is Generated Type of Equipment Equipment No. Date of Installation Dimensions of Equipment Width (m) Length (m) Height (m) Diameter (m) Mode of Operation (Continuous/Batch) Installed/Processing* Capacity For Batch Process Duration of each Batch (h) No. of Batches per Day For Tanks Used toStore Organic Liquids,including Liquid Fuels Type of Organic Liquid Stored Tank Storage Capacity (m3) Fuel Using Equipment Type of Fuel Using Equipment Fuel to be Used Type Ash Content (%) Sulphur Content (%) Other Specifications Fuel Consumption Rate(kg/h) Maximum Normal Air Pollution ControlEquipment Incorporated Type Pollutant to be Controlled Designed Efficiency (%) Operating Schedule Operating Hours per Day Operating Days per Month 6. Drawings (1) Please provide— (a) schematic diagrams of process flow showing the flow of materials, including raw materials, materials in process of manufacture, manufactured materials, by-products and waste materials; and (b) a block plan showing the locations of all emission points in the premises with consistent reference numbers. (2) All emission points and processes/equipment, including air pollution control equipment, associated with each emission point, must be identified and labelled with consistent reference numbers. * Delete whichever is inapplicable.(L.N. 212 of 1996)