Cap. 311 sub. leg. G

Air Pollution Control (Specified Processes) (Specification of Required Particulars and Information) Order 1993(L.N. 478 of 1994)(Cap. 311, section 19(1))(Enacting provision omitted—E.R. 1 of 2023)[6 August 1993](Format changes—E.R. 1 of 2023) 1. Notice of existing premises used for specified processes Notice of the existence of premises used for the conduct of any of the specified processes listed in Schedule 1, containing the particulars and information specified in the form set out in Schedule 2, shall be given in writing by the owner of the premises to the Authority, in the manner specified in that form. 2. (Omitted as spent—E.R. 1 of 2023) Schedule 1 [s. 1]Specified Processes 1. Aluminium Works 2. Cement Works 3. Ceramic Works 4. Copper Works 5. Gas Works 6. Petrochemical Works 7. Sulphuric Acid Works 8. Tar and Bitumen Works 9. Lead Works 10. Asbestos Works 11. Chemical Incineration Works 12. Hydrochloric Acid Works 13. Hydrogen Cyanide Works 14. Sulphide Works 15. Pathological Waste Incinerators 16. Petroleum Works Schedule 2 [s. 1]Form Air Pollution Control Ordinance (Chapter 311) NOTIFICATION OF THE EXISTENCE OF PREMISES USED FOR THE CONDUCTOF A SPECIFIED PROCESS PURSUANT TO SECTION 19(1) To: The Authority 1. I/We* the undersigned, being the owner/owners* specified in paragraph 2 of the undermentioned premises, hereby give notice that the premises described in paragraph 3 are used for the conduct of the process specified in paragraph 4 and declare that the particulars and information furnished hereunder are correct. This notification consists of . pages, with associated drawing (. sheets). Signature: Name: Date: 2. Details of Owner(s) Name(s) of Owner(s)(Surname First) Status(e.g. lessee, occupier) Correspondence Address TelephoneNumber Identity Card/Certificate ofIncorporation* Number English Chinese 3. Premises where the Specified Process is Conducted Name of Premises Address TelephoneNumber English Chinese Contact Person in thePremises (Surname First) Title or Position Correspondence Address TelephoneNumber English Chinese BusinessRegistration No. Certificate ofIncorporation No. No. of Employeesin the Premises Area of thePremises (m2) LandStatus Name(s) of Land Owner(s) Address TelephoneNumber English Chinese 4. Nature of Work Specified Process referred in Schedule 1 to the Ordinance Brief Descriptionof Process Raw materials withPercentage Composition Products withPercentage Composition Raw Materials Consumption Rates (tonnes) Hourly Normal Product Production Rates (tonnes) Hourly Normal Maximum Maximum Daily Daily Monthly Monthly Annual Annual Installed/Processing* Capacity Total Silo Capacity (For Cement Works only) Operating Schedule Normal Operating Hours From To Operating Hours per Day Operating Days per Year 5. Fuel Using/processing Equipment Emission Point No. Discharge Exit or Chimney Height (m above ground) Cross-section of DischargeExit or Chimney Width (m) Length (m) Diameter(m) Equipment Servingthe Emission Point Type of Equipment Equipment No. Date of Installation Dimensionsof Equipment Width (m) Length (m) Height (m) Diameter (m) Mode of Operation (Continuous/Batch) Installed/Processing* Capacity For Batch Process Duration of each Batch (h) No. of Batches per Day For Fuel Using Equipment Type of Fuel Using Equipment Date of Installation Fuel to be Used Type Ash Content (%) Sulphur Content (%) Other Specifications Fuel Consumption Rate(kg/h) Maximum Normal Air Pollution Control Equipment Type Pollutant to be Controlled Designed Efficiency (%) Operating Schedule Operating Hours per Day Operating Days per Month 6. Drawings Please provide schematic diagrams of process flow showing the flow of materials, including raw materials in process of manufacture, manufactured materials, by-products and waste materials. All emission points and processes/equipment, including air pollution control equipment, associated with each emission point, must be identified and labelled with consistent reference numbers. * Delete whichever is inapplicable.(L.N. 212 of 1996; E.R. 1 of 2023)