The issue of the coins listed in the Schedule is authorized.
Coinage (Commemorative Coins) Order 1996(Cap. 454, section 2)(Enacting provision omitted—E.R. 5 of 2020)[12 July 1996](Format changes—E.R. 5 of 2020) 1. Authorization of issue of coins The issue of the coins, the particulars of which are specified in the Schedule, is authorized. Schedule [s. 1] Denomination and Design of Coin Composition Standard Weight Remedy Allowance Grains Grammes Hong Kong Ten Dollar Piece bearing on the reverse side the design shown in Figure 1(a) and on the obverse side the design shown in Figure 1(b) Bimetal (Outer annulus of cupro-nickel, inner core of nickel-brass) 169.753 11.00 One part in 815 parts Hong Kong Five Dollar Piece bearing on the reverse side the design shown in Figure 2(a) and on the obverse side the design shown in Figure 2(b) Cupro-nickel (84% copper, 16% nickel) 208.333 13.50 One part in 205 parts Hong Kong Two Dollar Piece bearing on the reverse side the design shown in Figure 3(a) and on the obverse side the design shown in Figure 3(b) Cupro-nickel (84% copper, 16% nickel) 129.784 8.41 One part in 180 parts Hong Kong One Dollar Piece bearing on the reverse side the design shown in Figure 4(a) and on the obverse side the design shown in Figure 4(b) Cupro-nickel (84% copper, 16% nickel) 109.568 7.10 One part in 630 parts Hong Kong Fifty Cent Piece bearing on the reverse side the design shown in Figure 5(a) and on the obverse side the design shown in Figure 5(b) Brass plated steel 75.926 4.92 One part in 495 parts Hong Kong Twenty Cent Piece bearing on the reverse side the design shown in Figure 6(a) and on the obverse side the design shown in Figure 6(b) Nickel-brass (70% copper, 24.5% zinc, 5.5% nickel) 39.969 2.59 One part in 125 parts Hong Kong Ten Cent Piece bearing on the reverse side the design shown in Figure 7(a) and on the obverse side the design shown in Figure 7(b) Brass plated steel 28.549 1.85 One part in 495 parts Designs Figure 1(a) Figure 1(b) Figure 2(a) Figure 2(b) Figure 3(a) Figure 3(b) Figure 4(a) Figure 4(b) Figure 5(a) Figure 5(b) Figure 6(a) Figure 6(b) Figure 7(a) Figure 7(b)