Measurement Units and Measurement Standards Act

10. Board of National Metrology Institute and its composition

11. Term of office of members of Board

12. Disqualification as member of Board

13. Conditions of appointment of members of Board

14. Meetings of Board

15. Quorum and decisions of Board

16. Committees of Board

17. Consultative forum CHAPTER 6 EXECUTIVE MANAGEMENT

18. Appointment of Chief Executive Officer

19. Employment contract and performance agreement

20. Appointment of staff 21. Services of non-employees

22. Delegation CHAPTER 7 FINANCIAL MANAGEMENT 23. Funds and investments 24. Financial year and accounting CHAPTER 8 GENERAL PROVISIONS

20. The Chief Executive Officer, after consulting the Board, may— (a) appoint staff to assist the National Metrology Institute in carrying out its functions; and (b) determine the remuneration, allowances, benefits and other terms and conditions of appointment of members of staff taking into account the Public Service Act, 1994 (Proclamation No. 103 of 1994). Services of non-employees

21. The National Metrology Institute may enter into a contract with any person other than an employee to perform any of its functions for and on behalf of the National Metrology Institute. Delegation 22. (1) The Board may delegate any of its functions to the Chief Executive Officer in accordance with this section. (2) The Chief Executive Officer may delegate functions entrusted to the Chief Executive Officer under this Act to— (a) any other person with appropriate knowledge and experience who is under the control of the Chief Executive Officer; or (b) any other person, after consulting the Board. (3) A delegation under subsection (1) or (2) must be in writing and— (a) may be subject to any conditions or restrictions determined by the Board or the Chief Executive Officer; (b) does not prevent the exercise of any power by the Board or the Chief Executive Officer; and (c) may be withdrawn or amended by the Board or the Chief Executive Officer. CHAPTER 7 FINANCIAL MANAGEMENT Funds and investments 23. (1) The funds of the National Metrology Institute consist of— (a) money that is appropriated by Parliament for that purpose; (b) income derived by the National Metrology Institute from its services or products; Act No. 18,2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 (c) income derived by the National Metrology Institute from its investments; and (d) money received from any other source. (2) The National Metrology Institute may invest any of its funds not immediately required— (a) subject to any investment policy that may be prescribed in terms of section 7(4) of the Public Finance Management Act; and (b) in such manner as may be approved by the Minister. Financial year and accounting

28. Transitional provisions 29. Short title and commencement Act No. 18,2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT,.200$ SCHEDULE CHAPTER 1 INTERPRETATION Definitions

26. The Minister may make regulations regarding any ancillary or incidental administrative or procedural matter that it is necessary or expedient to prescribe for the proper implementation or administration of this Act. Repeal of laws

27. Subject to section 28, the laws referred to in the second column of the Schedule are hereby repealed to the extent indicated in the third column of the Schedule. Transitional provisions 28. (1) For the purposes of this section "effective date" means the date on which the National Metrology Institute is established as a juristic person. (2) As from the effective date— (a) all rights, obligations, assets and liabilities acquired or incurred by the CSIR National Metrology Laboratory vest in the National Metrology Institute; (b) all employees of the CSIR National Metrology Laboratory are transferred to the National Metrology Institute as if section 197 of the Labour Relations Act, 1995 (Act No. 66 of 1995), applies; (c) all notices, designations and certificates issued in terms of the Measuring Units and National Measuring Standards Act, 1973 (Act No. 76 of 1973), must be regarded as having been issued in terms of this Act; and Act No. 18,2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 (d) all regulations made in terms of the Measuring Units and National Measuring Standards Act, 1973 (Act No. 76 of 1973), must be regarded as having been made in terms of this Act. Short title and commencement

29. This Act is called the Measurement Units and Measurement Standards Act, 2006, and comes into operation on a date to be fixed by the President by proclamation in the Gazette. Act No. 18, 2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 SCHEDULE (Section 27) No. and Year of Law Short Title Extent of Repeal Act No. 76 of 1973 Measuring Units and National The whole Measuring Standards Act, 1973 Act No. 46 of 1988 Scientific Research Council Section 4(3) Act, 1988 Act No. 24 of 1998 Measuring Units and National Measuring Standards Amend ment Act, 1998 The whole

1. In this Act, unless the context indicates otherwise— "Board" means the Board appointed in terms of section 10; "CIPM" means the International Committee of Weights and Measures (Comite International des Poids et Mesures) established under the Metre Convention; "CIPM Mutual Recognition Arrangement" means an arrangement signed by member states under the Metre Convention for the mutual recognition of national measurement standards and calibration and measurement certificates issued by National Metrology Institutes; "CSIR" means the Council for Scientific and Industrial Research described in section 1 of the Scientific Research Act, 1988 (Act No. 46 of 1988); "Metre Convention" (Convention du Metre), means the diplomatic treaty which gives authority to the General Conference on Weights and Measures (Conference Gendrale des Poids et Mesures (CGPM)), the CIPM and the International Bureau of Weights and Measures (Bureau International des Poids et Mesures (BIPM)) to act in matters of world metrology, particularly concerning the demand for measure ment standards of ever increasing accuracy, range and diversity, and the need to demonstrate equivalence between national measurement standards; "Minister" means the Minister of Trade and Industry; "national measurement standard" means a measurement standard designated in terms of section 5 as a national measurement standard; "national reference measurement" means a reference measurement designated in terms of section 6 as a national reference measurement; "National Metrology Institute" means the National Metrology Institute of South Africa established by section 8; "Public Finance Management Act" means the Public Finance Management Act, 1999 (Act No. 1 of 1999); "quantity" means the property of a phenomenon, body or substance to which a magnitude can be assigned; "SI" means the recommended practical system of units of measurement as accepted under the Metre Convention and known as the International System of Units (Systeme International d'Unite's); "this Act" includes any regulations made in terms of section 27; "traceable" means traceable in terms of sections 5(3) and 6; "uncertainty of measurement" means a parameter associated with the result of a measurement, that characterises the dispersion of the values that could reasonably be attributed to the measurement; "unit" means a measurement unit published by the Minister in terms of section 2; "use", in relation to a unit, means the expression of the magnitude of any quantity by means of a unit. Act No. 18, 2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 CHAPTER 2 NATIONAL MEASUREMENT UNITS Units

2. The units in the Republic and the symbols of those units and the rules relating to the use of units and their symbols must be— (a) the units, the appropriate symbols and the rules of the SI as published by the Minister in the Gazette; and (b) such other units, such other symbols of those units and such rules relating to the use of those units and their symbols as the Minister may publish in the Gazette. Prohibition of expression of magnitude of quantities and designation of units 3. (1) The Minister may by notice in the Gazette prohibit— (a) (b) the expression, in the circumstances or for the purposes of or in connection with the matters and in respect of the goods or things specified in the notice, of the magnitude of quantities by means of any unit other than a unit so specified; the designation, in the circumstances or for the purposes of or in connection with the matters and in respect of the goods or things specified in the notice, of any unit so specified by means of any symbol other than a symbol so specified. (2) A notice contemplated in subsection (1) may be expressed to apply to a specified area only and may make provision for the granting of exemptions from any of its provisions. Equivalent of certain units

4. The Minister may by notice in the Gazette determine the equivalent of any unit, expressed in any other unit of the same quantity, and any equivalent so determined must for all purposes be regarded to be the equivalent of the unit in question. CHAPTER 3 NATIONAL MEASUREMENT STANDARDS National measurement standards 5. (1) The Minister may by notice in the Gazette designate any measurement standard described in the notice as a national measurement standard. (2) The value of a national measurement standard in relation to the SI units must— (a) be the value as determined by the National Metrology Institute; (b) be regarded as the most accurate value of that national measurement standard; and (c) have stated uncertainties of measurement. (3) A measurement standard which is not a national measurement standard must— (a) for the purposes of measurement for any legal purpose, be traceable to one or more national measurement standards; (b) be so traceable that the measurement standard is related to one or more national measurement standards as contemplated in paragraph (a) through an unbroken chain of comparisons— stating appropriate uncertainties of measurement; and (i) (ii) carried out by a calibration laboratory accredited by the South African National Accreditation System (SANAS) or an accredita tion body enabled in terms of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act in that specific area of metrology. Act No. 18, 2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 (4) For the purposes of this section "calibration laboratory" means a body that performs a set of operations that establish, under specified conditions, the relationship between values of quantities indicated by a measuring instrument or measuring system, or values represented by a material measure or reference material, and corresponding values realised by standards, whatever their uncertainty. National reference measurements

6. A reference measurement or analysis performed for any legal purpose by the National Metrology Institute— (a) stating uncertainties of measurement; and (b) traceable to— (i) one or more national measurement standards; or (ii) certified reference materials traceable to national measurement standards recognised under the CIPM Mutual Recognition Arrange ment; or internationally agreed references recognised through the CIPM, (iii) must be regarded as the true value. Certificates 7. (1) The National Metrology Institute may issue a certificate stating the outcome of a measurement or analysis regarding any matter mentioned in section 5(2) or (3) and section 6. (2) The certificate referred to in subsection (1) must be signed by a person in the employ of the National Metrology Institute determined by the Board. (3) The Board may authorise a person in the employ of the National Metrology Institute to certify a copy of a certificate contemplated in subsection (1) to be a true copy in the manner determined by the Board. (4) In any criminal proceedings a document which purports to be a certificate issued and signed in accordance with subsections (1) and (2) or a copy of such certificate certified in accordance with subsection (3) must upon its production be regarded as evidence of the facts contained therein. CHAPTER 4 ESTABLISHMENT OF NATIONAL METROLOGY INSTITUTE Establishment of National Metrology Institute 8. (1) The National Metrology Institute of South Africa is hereby established. (2) The establishment of the National Metrology Institute does not affect the validity of any action taken by the CSIR National Metrology Laboratory prior to the commencement of this Act. (3) The National Metrology Institute— is a juristic person; and (a) (b) must exercise its functions in accordance with this Act. (4) The Public Finance Management Act applies to the National Metrology Institute. Functions of National Metrology Institute 9. (1) The National Metrology Institute must— (a) maintain the units described in section (2)(a) for South Africa in accordance with units defined by the CIPM and advise the Minister on other units described in section (2)(b); (b) keep and maintain all national measurement standards; Act No. 18, 2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 (c) arrange for an appropriate periodic comparison of the national measurement standards with the corresponding national measurement standards or refer ences recognised as such and ensure their correction, if necessary; (d) certify reference materials and arrange for a comparison of the related procedures and primary methods with the corresponding other national procedures and primary methods and ensure their correction, if necessary; (e) ensure compliance with and validation in terms of the stipulations of the CIPM Mutual Recognition Arrangement and must effect the inclusion of the Republic's calibration and measurement capabilities in this arrangement; and (f) co-ordinate and manage international, regional and bilateral interaction with other national metrology institutes and bodies affiliated to the CIPM and interact with such institutes and bodies. (2) The National Metrology Institute may— (a) acquire or dispose of any right in or to property, but ownership in immovable property may be acquired or disposed of only with the consent of the Minister; (b) open and operate banking accounts in the name of the National Metrology Institute; insure the National Metrology Institute against— (c) (i) any loss, damage or risk; (ii) any liability it may incur in the application of this Act; (d) perform legal acts, including acts in association with or on behalf of any other person or organ of state; (e) subject to subsection (3), conclude agreements with organs of state and other persons; and institute or defend any legal action. (f) (3) An agreement concluded in terms of subsection (2)(e) may not conflict with any international requirement binding on the National Metrology Institute. (4) The National Metrology Institute may— (a) keep and maintain the equipment necessary for bringing national measure ment standards into being, certify reference materials and see to the procedures connected thereto; (b) establish and maintain the necessary expertise and competence according to internationally acceptable standards; (c) establish confidence in the accuracy of the national measurement standards by suitable and documented verification processes and by keeping the applicable records of the results; (d) upgrade the existing measurement standards or develop such new measure ment standards and reference material certification procedures in line with the requirements of commerce and industry; (e) disseminate traceability, measurement expertise or services to South African commerce and industry by means of calibration, measurement or analysis, certified reference materials or appropriate technology and skills transfer; (f) maintain close links with the CIPM and associated activities of the Metre Convention; (g) participate and represent South Africa regionally and internationally with reference to traceability and measurement issues; (h) nominate an institute with specific competence to represent the National Metrology Institute in a specific field of metrology where the National Metrology Institute does not have sufficient competence to do so; subcontract a part of its calibration, measurement or certified reference material certification activities to another laboratory with which it collabo rates; and (i) Act No. 18, 2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 (j) establish technical advisory forums to facilitate dissemination of international best practice and gather input from commerce and industry. CHAPTER 5 BOARD OF NATIONAL METROLOGY INSTITUTE Board of National Metrology Institute and its composition 10. (1) The Board of the National Metrology Institute consists of— (a) not less than seven and not more than 12 members appointed by the Minister; the Chief Executive Officer appointed in terms of section 18 by virtue of his (b) or her office; (c) not more than two senior managers of the National Metrology Institute ll appointed by the Minister as executive members of the Board. (2) When appointing the members of the Board contemplated in subsection (l)(a), the Minister must ensure that those members— (a) are broadly representative of the demographics of the country including with regard to gender and disability; and 1: (b) have sufficient knowledge, experience or qualifications relating to the functions of the National Metrology Institute. (3) The chairperson of the Board must be selected by the members contemplated in subsection (l)(a) from amongst their number at the first meeting of the newly appointed Board and the selection must be approved by the Minister. 2( Term of office of members of Board 11. (1) Non-executive members of the Board hold office for a period not exceeding five years and are eligible for re-appointment for one further term only. (2) A person appointed to fill a vacancy holds office for the remaining portion of the term of the vacating member. (3) A member may resign by giving at least one month's written notice. 2! Disqualification of members of Board 12. (1) A person may not be appointed or continue to serve as a member of the Board if that person— is an unrehabilitated insolvent; (a) (b) has at any time been convicted of an offence involving dishonesty; (c) has, as a result of improper conduct, been removed from an office of trust; or (d) has been declared by a court to be mentally ill or unfit. 3( (2) A member of the Board must vacate his or her office if the member is absent from three consecutive meetings of the Board without the prior leave of the chairperson. 3: (3) The Minister may, at any time, after consulting the Board, terminate the term of office of any member of the Board if there are good reasons for doing so. Conditions of appointment of members of Board 13. (1) The conditions of appointment of members of the Board who are not employed by an organ of state are determined by the Minister. 4( (2) The conditions of appointment may include remuneration and allowances payable to the members of the Board as determined by the Minister after consultation with the Minister of Finance. Act No. 18,2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 (3) Members who are employed by an organ of state are not entitled to remuneration and allowances but must be reimbursed by the National Metrology Institute for out of pocket expenses. (4) Non-executive members of the Board are appointed part time. Meetings of Board 14. (1) The Board must meet at least four times a year. (2) The first meeting of the Board is held at the time and place determined by the Minister. (3) The chairperson of the Board decides when and where the Board will meet, but a majority of Board members may request the chairperson in writing to convene a meeting at a time set out in the request. (4) If the chairperson is absent from a meeting, the Board may elect another member to preside at that meeting. Quorum and decisions of Board 15. (1) The majority of the members of the Board constitute a quorum for a meeting of the Board. (2) Decisions of the Board require the supporting vote of a majority of the members present at the meeting. (3) The Board must keep minutes of its proceedings and decisions. (4) The Board may, by resolution, make rules to further regulate its proceedings. Committees of Board 16. (1) The Board may form committees to enable it to perform its functions. (2) The Board must determine the composition, rules and procedures of committees established in terms of this section. (3) The Board may from time to time dissolve or reconstitute a committee. Consultative forum 17. (1) The Board must establish a consultative forum with representatives of organisations who have an interest in the matters contemplated in sections 2, 5 and 6. (2) The forum must advise the Board on— (a) matters in respect of which the National Metrology Institute could play a role; (b) any other matter on which the Board requests advice. (3) The Board must adopt a constitution and, if necessary, rules for the forum. CHAPTER 6 EXECUTIVE MANAGEMENT Appointment of Chief Executive Officer 18. (1) The Board, after consulting the Minister, must appoint a suitably qualified person as Chief Executive Officer. (2) The Chief Executive Officer is an employee of the National Metrology Institute and is accountable to the Board. (3) The Chief Executive Officer is responsible for the efficient management of the National Metrology Institute and must perform any function delegated to him or her by the Board. (4) The Chief Executive Officer holds office for an agreed term not exceeding five years and may be reappointed upon the expiry of that term of office. Act No. 18, 2006 MEASUREMENT UNITS AND MEASUREMENT STANDARDS ACT, 2006 (5) If the Chief Executive Officer is unable to fulfil his or her functions, the Board may appoint an acting Chief Executive Officer to exercise the powers and perform the functions of the Chief Executive Officer. Employment contract and performance agreement 19. (1) The employment contract of the Chief Executive Officer must be in writing and must incorporate in an appropriate form the provisions of section 57 of the Public Finance Management Act. (2) The Board and the Chief Executive Officer must conclude a performance agreement for the Chief Executive Officer. (3) The performance agreement must include— (a) measurable performance objectives and targets that must be met, and the time frames within which those performance objectives and targets must be met; (b) standards and procedures for evaluating performance and intervals for evaluation; and (c) the consequences of substandard performance. Appointment of staff

24. The financial year of the National Metrology Institute is from 1 April in any year to 31 March in the following year, except that the first financial year of the National Metrology Institute begins on the date that this Act comes into operation, and ends on 31 March next following that date. CHAPTER 8 GENERAL PROVISIONS Offences 25. (1) Any person who knowingly— (a) makes or assist in making a report, return, notice or any other document to be sent to any other person, as required by this Act, that contains an untrue statement of a material fact; or (b) omits to state a material fact on any of the documents referred to in paragraph (a) that will be sent to any other person, as required by this Act; or (c) misrepresents data or the symbol of the National Metrology Institute, is guilty of an offence. (2) A person convicted of an offence under this section is liable to a fine or to imprisonment for a period not exceeding 24 months or to both a fine and such imprisonment. Regulations