THE VALUE ADDED TAX (EXEMPTION)

1. This Order may be cited as the Value Added Tax (Exemption) (Upgrading of Kabingo – Kasulu- Manyovu ( 260.6 Km) Road to Bitumen Standard) (Lot 3: Mvugwe – Nduta Junction section (59.35 km) (Tanzania National Stecol Corporation) Order, 2020 and shall be deemed to have come into operation on the 23rd day of July, 2020. (TANROADS)) Roads (M/S

2.-(1) Subject to the conditions specified in paragraph 3 of this Order, and any other conditions as may be specified by the Commissioner, the whole of the Value Added Tax payable on the goods or services specified in the Schedule to this Order, imported or locally purchased prior to clearance through customs by or on behalf of Tanzania National Roads (TANROADS) by M/S Stecol Corporation to be used solely in the project of Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road to Bitumen Standard, (Lot 3: Mvugwe – Nduta Junction section (59.35 km) is hereby exempt. (2) For avoidance of doubt, the goods imported or locally purchased, whether directly by a Government entity or through a contractor shall remain the property of the Government of Tanzania. 1 Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) Conditions

3. The exemption granted under this Order shall cease to have effect and the Value Added Tax shall become due and be payable as if this exemption had not been made if the said goods or services are used for other purposes or sold or disposed of in any way to another person not entitled to enjoy similar privileges as are conferred under this Order. Expiry

4. This Order shall expire on the 20th day of February, 2023. 2 Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) _______ SCHEDULE _______ (Made under paragraph 2(1)) GOODS AND SERVICES S/N ITEM DESCRIPTION QUANTITY (QTY) UNIT OF MEASURE D1 Double Cabin Pick up Delux /Standard 3 unit D2 Electric welding rod 2,000 kg D3 Nail D4 Drilling road D5 Drilling bits 1,800 kg 300 No 120 No D6 Gamalin disinfection 25,000 L D7 Galvanized iron wire 11,000 kg D8 water proofing paint 8,000 L D9 Gabion boxes 3,000 m2 D10 Plastic warning tape 8,000 m D11 Ladder D12 Road studs 100 mm x 100 mm ROADTEC, K-Lite or similar 10 No 8,200 No D13 Information signs at Bus Stations 20 No D14 Type W warning signs 230 No D15 Type R regulatory signs 190 No D17 Additional road sign plate 30 No D18 Route Direction Signs 80 m2 3 PLACE OF PURCHASE ITEMS OF (Local or Imported) Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) D19 Thermoplastic road-marking paint 150,000 kg D20 Reflection bead 120,000 kg D21 Oxygen D22 Acetylene gas D23 Timber 1,800 m3 2,000 kg 1,000 m3 D24 Waterproof cover 25,000 m2 D25 Bitumen 4,550 T D26 MC-30 cut-back bitumen 718,200 L D27 Cement 42.5 D28 Cement 32.5 8,200 T 23,000 T D29 High Yield Stress Steel Reinforcement 1,500 T D30 D31 D32 D33 D34 D35 250x250x46mm thick laminated elastomeric bearings 450x450x210mm thick elastomeric bearings bearings 50mm dia galvanised steel handrail pipe with 12mm thick plate 100x100x12mm thick shaped steel plate handrail with 125x75x8mm RHS support posts @ 2000mm c/c, with 1no. 50mm & 4no. 40mm diameter CHS balustrade of ARMCO flex beam with 124x75x8mm rectangula hollow section (RHS) 50 No. 32 No. 300 m 300 No. 300 m 300 m D36 6No. 150mm diameter service pipes 1,000 m D37 D38 D39 D40 Geotextile filter fabric to wall ( as terram 280g/m2 Bituminous water-proofing paint tobacks

2.8m long 75mm diameter Class C PVC drainpipeto deck slab at both kerbs

2.0m long 75mm diameter Class C PVC drainpipe to deck slab at both kerbs 1,500 m3 3,000 m2 80 No. 90 No. 4 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) D41 D42 300x300x6mm plate welded to 1400mm long, 32mm diameter . 32 No. 600mm long 25mm diameter galvanised steel bolts properly grouted 150 No. D43 75x75x8mm Equal Angle edge 240 m D44 25mm mastic joint filler 50 L D45 Polysulphide sealant self leveling 30 L D46 25mm thick styroform 60 m2 D47 Zinc bromide paint 100 L D48 25mm Thick Elastomeric Compresion Seal D49 5No. plate girders 10 No. 1016x305x487kg/m UB for deck girders 52 m 230 t 80 t 1No. 1460x308.5x40mm thick plate and 2No. 1460x125x40mm thick plate 2 t D50 D51 D52 1No. 1460x308.5x40mm thick plate and 2No. 1460x125x40mm thick plate 2 t D53 1No. 1010x500x40mm thick plate and 2No. 1010x200x40mm thick plate 1 t D54 1No. 1010x600x40mm thick plate and 2No. 1010x240x40mm thick plate 1 t D55 1425x660x40mm splice plates both 1 t 102x51x10.4kg/m equal angle shear connectors at 300mm D56 6 t D57 400x100x58.9kg/m channel bracing 9 t D58 240x20mm web stiffeners plate 2 t D59 240x20mm web stiffeners plate 9 t D60 150x20mm web stiffeners plate 9 t 5 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) D61 M30 HSFG bolts at splices 3,800 No D62 M24 bolts at cross bracings 544 No D63 Steel pipes D64 Scaffold D65 uPVC Pipe 100 2,000 m 500 t 4,000 m D66 uPVC Fittings 400 set D67 Highway guardrail 30,000 m D68 Guardrail Reflector 5,000 no D69 Guardrail End units: 280 no D70 D71 D72 D73 D74 D75 D76 D77 D78 IT05 coated aluminum sheets 4000 M2 Iron sheets Paints Gypsum board Tiles Aluminium windows Hardwood Doors Concrete blocks Lights 3000 M 1000 L 2500 M2 2500 M2 500 M2 100 no 6000 M2 no 150 6 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) D79 D80 D81 D82 D83 PE Water Tank (SIMTANK) Water Booster Pumps PPR pipes PPR pipe fittings valves E Survey Equipment and accessaries no no 20 20 4000 m no no 200 50 E1 Electronic calculators 5 no. E2 Complete set of GNSS RTK system (Base and two rover receivers) 2 no. E3 Hand GPS 6 no. E4 Level Instrument 10 no. E5 Automatic level 2 no. E6 Digital level 2 no. E7 Metal Leveling Staves 5m (Telescopic). 20 no. E8 Metal Pocket Ruler. 25 no. E9 Optical Square. 5 no. 7 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) E10 Steel Tape 5m-100m 60 no. E11 Measuring Tape 50m-100m 40 no. E12 Surveying Umbrella. 10 no. E13 Theodolite J6E 10 no. E14 Total Station 2 no. E15 Surveying Software QIFEI 4 no. E16 Foot Plate 20 no. E17 Hand Book Theodolite 50 no. E18 Hand Book Level Instrument 50 no. E19 Walkie-Talkie 10 no. E20 Walkie-Talkie Relay Station 4 no. G Prefab-House, Funiture, Office Equipment G1 Prefabricated Building 2,500 m2 G2 Reams of a4 Photocopy Paper 100 box G3 Reams of a3 Photocopy Paper 100 box G4 G5 4 Plate Electric Cooker With Oven and Grill 3 no. Water dispenser with hot cold functions 5 no. G6 Lap Top Computers 3 no. G7 Photocopier With Consumables 4 no. 8 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) G8 Server G9 Scanner 4 no. 2 no. G10 Desk Top Computer 4 no. G11 Digital Camera 2 no. G12 Colour Printer With Comsumables G13 Laserjet Printer With Comsumables 4 no. 2 no. G14 Projector 2 no. G15 UPS (Uninterruptible Power Supply) 7 no. G16 Internet Cable 500 m G17 Exchange board 6 no. G18 Router/modem G19 Security camera G20 Television 15 no. 20 no. 3 no. G21 Microwave oven 3 no. G22 Refrigerator/Freezer 3 no. G23 Water Treatment Machine and Accessories WT-3000 10 no. G24 Air Conditioner 10 no. G25 Washing Machine 3 no. G26 Safe box 2 no. G27 Electrical Water Heater 10 no. G28 Solar Water Heater & Accessories 10 no. G29 Electrical Fan 10 no. G30 Furniture( Table) 20 no. G31 Furniture( Desk) 20 no. 9 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) G32 Furniture( Shelf) 5 no. G33 Storage shelves 9 no. G34 Furniture(Chairs) no. 300 G35 Furniture( Sofa ) 13 no. G36 Steel filing cabinets 10 no. G37 Steel general purpose lockable cabinets with shelves 10 no. G38 Steel drawing cabinets 3 no. G39 Filing trays no. 15 G40 Facsimile transmitting machine 1 no. G41 Labor Protection(Gun Boots) 700 no. G42 Labor Protection(Uniforms) G43 Reflective Road safety vest 1000 no. 1000 no. G44 Digital flatbed scanner 1 no. G45 Electronic calculators 5 no. G46 Twin hot plates 1 no. G47 Microwave Oven combi Sage or similar Turntable 2 no. G48 Paper Shredder 3 no. G49 Anti-Virus Software 20 no. G50 Cad Drawing Software 2 no. G51 Micro-Software Office 5 no. G52 Auto Civil 3d Software 2 no. G53 G54 G55 Hand wash basin Washroom (WC) suites Mirrors no no no 5 5 10 10 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) G56 G57 G58 G59 G65 G66 Stainless shower tray and its shower closure(shower cubical) complete with shower mixer connecting accessories Towel rail Soap dispenser Toilet tissue holder Curtains Lamps G67 Plotter G68 Paper shredder no no no no no no 10 10 10 10 20 40 1 no. 3 no. J J1 J2 J3 J4 J5 J6 J7 J8 J9 Laboratory for The Engineer Desks, Minimum 1.8 m x 0.9 m, with Lockable Single Chest of Drawers 2 no. Table with Smooth Flat Top, Minimum

1.8 m x 0.9 m 2 no. Table Lamps 4 no. Swivel Type Desk Chairs 4 no. Visitors Chairs 4 no. Waste Paper Baskets 2 no. Filing Trays 4 no. Wall Boards 2.4 x 1.2 m 2 no. Steel Cupboard with Shelves 2 no. J10 Steel Filing Cabinet with 4 Lockable Drawers 2 no. J11 Shelves, 2 m Long 4 no. J12 Air Conditioner, 12,000 Btu/Hr 4 no. J13 Portable Fan J14 Work Benches J15 Curing Tanks 2 no. 6 no. 2 no. 11 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J16 Stools, 1 m High 8 no. J17 Stools, 0.4 m High 8 no. Compaction Compaction Mould, 1 Litre Capacity, Complete with Base Plate And Extension Collar 101.6 Mm Internal Diameter×116.43 Mm High 4 No. Compaction Hammer, 2.49 Kg, Drop Regulated To 304.8 Mm 4 No. Compaction Hammer,4.536kg, Drop Regulated To 457.2 Mm 4 No. Electric Vibrating "Kango" Hammer Fitted with Steel Tamper (BS 1377) with Support Frame 3 No. Straight Edge, 300 Mm Long, with Handles 18 No. Steel Tamper (BS 1377) Compatible with The Kango Hammer 6 No. Compaction Mould, 152.4mm Dia×

116.43mm High, Complete with Base Plate And Extension Collar 9 No. J18 J19 J20 J21 J22 J23 J24 J25 Galvanized Metal Tray,1.0m×0.5m×75mm Deep 18 No. J26 75mm Brush 9 No. J27 Semi Automatic Balance, 25 Kg Capacity, Accurate To 1 g, Including Weights 9 No. J28 20 Mm BS Sieve, 300 Mm Diameter 3 No. J29 Set of French Curves 6 No. J30 Stop Clock 9 No. 12 Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J31 Organic Content Complete 2 No. Density(Sand Replacement Method BS 1377) J32 Metal Containers, 450 Mm Diameter 24 No. J33 Stainless Steel Tray,305 Mm Diameter 12 No. J34 J35 Metal Tray with 150 ,, Diameter Hole In The Centre, 300 Mm× 300 Mm Square Or Equivalent Area,40 Mm Deep 12 No. Metal Tray with 200 Mm Dameter Hole In The Centre, 500 Mm× 500 Mm Square Or Equivalent Area, 50 Mm Deep 12 No. J36 Steel Pegs for Fixing Tray In Position 200 No. J37 J38 J39 Sand Pouring Cylinder,150 Mm Diameter 12 No. Cold Steel Chisel, 20 Mm Dia.×300 Mm Long 24 No. Cold Steel Chisel, 10 Mm Dia.×250 Long 24 No. J40

1.5kg Hammer 36 No. J41 Scoop for Removing Excavated Material From Density Hole,250 Mm Long Handles. 36 No. J42 100 Mm Soft Brush 12 No. J43 50 Mm Soft Brush 24 No. J44 J45 Calibrating Can, 150 Mm Dia.×150 Mm Deep 12 No. Calibrating Can, 200 Mm Dia.×250 Mm Deep 12 No. 13 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J46 Plastic Container Jars Neck 125 Mm Diameter And 4 Litre Capacity 3 No. Local/ Imported Density Test (Nuclear Density Method:Aashto t238) J47 Nuclear Moisture - Density Gauge( Troxler 3411b Or Similar Approved) 4 No. J48 Hole Forming Device for The Troxler 12 No. J49 Guide for The Hole Forming Device 12 No. J50 Rapid Density Set Complete Incl. Speedy Moisture Tester. 4 No. Local/ Imported Local/ Imported Local/ Imported Local/ Imported CBR ( BS 1377) J51 Automatic Cbr 300 Mm To 457 Mm, Rammer Weight 2.5 Kg And 4.5 Kg, 50 Mm Diameter Automatic Count Selectors 3 No. Local/ Imported J52 J53 J54 Central Extractor, Complete with 20 Kn Hydraulic Jack And Adaptor for Cbr Projector for 100 Mm And 150 Mm 3 No. Local/ Imported Cbr Mould, 127 Mm High ×152.4 Mm Dia. Complete with Perforated Base Plate And Extension Collar, 50.8 Mm High 200 No. Local/ Imported Perforated Swell Plate, 150 Mm Dia, with An Adjustable Centre Post of Rust-Proof Metal Provided with Lock- Out 200 No. J55 2kg Annular Surcharge Weight 200 No. J56 Solid Base Plate Cbr Mould 200 No. J57 Static Compaction Plug 12 No. 14 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J58 50 Mm. 70 Mm, 100 Mm Distance Piece 6 No. J59 Disc Lifting Handle 6 No. J60 Static Compaction Press, 50 Mm Tonnes Capacity, with An Adjustable Daylight Between Plates From 530mm To 250 Mm, Hydraulic Or Mechanical Operation, Hand-Operated 3 No. J61 Set of Guards for Item 43 Above 3 No. J62 Cbr Load Frame (Electric And Hand- Operated), with 50 Kn Proving Ring And Complete with All Accessories. 3 No. J63 Stabilising Bar for Ltem 45 Above. 3 No. J64 J65 Proving Ring; As In Ltem 45 Above But 28 Kn Capacity 3 No. Proving Ring; As In Ltem 45 Above But 10 Kn Capacity 3 No. J66 Penetration Gauge, 0- 25mm 6 No. J67 Cbr Piston Including Bracket 3 No. J68 J69 J70 Swell Measurement Tripod, Complete with Gauge Calibrated In 0.01 Mm Divisions 6 No. Soaking Tank Sufficient for 100 Cbr Moulds. 3 No. Tamping Steel Bar, 13 Mm Diameter, 300 Mm Long 3 No. Specified Gravity of Aggregates( BS 812) Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported J71 Wire Mesh Basket with Apertures Not Greater Than 6.5 Mm And The Basket To Be Large Enough To Take 2.5 Kg of Aggregate. 3 No. Local/ Imported 15 Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J72 Stout Water Tight Container In Which The Basket Above Can Be Freely Suspended Under Water 3 No. J73 Soft Absorbent Cloth (Tea Towel) 60 No. J74 Shallow Tray of Area Not Less Than

0.065m2 6 No. J75 An Airtight Container of Simiar Capacity To The Basket In Ltem 55 Above 3 No. J76 Pycnometer of 1 Lire Capacity 12 No. J77 Hairdrier(Electric) 2 No. J78 a Semi-Automatic 5 Kg Weighing Balance Accurate To 0.1 g of Size And Type To Permit The Basket Containing The Sample To Be Suspended In Water (To Be Supplied Weights) 3 No. Flakiness Index ( BS 812) J79 Thickness Gauge 6 No. Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Sieve Analysis ( BS 1377) Set of BS Sieves, 300 Mm Diameter, In Size 75 Mm , 63 Mm, 50 Mm, 37.5 Mm , 28 Mm, 20 Mm, 14 Mm, 10 Mm,

6.3 Mm , 5 Mm And 4 Mm Plus Lid And Receiver. 8 No. Local/ Imported Set of BS Sieves, 200 Mm Diameter , In Sizes 2 Mm, 1 Mm, 0.6 Mm, 0.5 Mm, 0.425 Mm, 0.300 Mm, 0.150 Mm And 0.075 Mm Plus Lid And Receiver. 8 No. J82 Electric Sieve Shaker 8 No. J83 BS Sieve,200 Mm Diameter, Size

0.425 Mm And 0.075 Mm 6 No. 16 Local/ Imported Local/ Imported Local/ Imported J80 J81 Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J84 J85 J86 1m×1m×75 Mm Deep Galvanised Metal Tray 60 No. Riffle Box with 50 Mm Slots( BS 1377) 6 No. Riffle Box with 10 Mm Slots( BS 1377) 3 No. J87 Specimen Mould Assembly 18 No. J88 Specimen Extractor 3 No. J89 Core Cutter Complete 3 No. J90 Marshall Compactor Complete 3 No. J91 Marshall Testing Machine Complete, Including Flow Meter 3 No. J92 Electric Mixer with Isomantle 3 No. J93 Water Bath 3 No. J94 200 Mm × 200 Mm × 50mm Deep Steel Baking Trays 30 No. J95 Pots Suitable for Heating Bitumen 30 No. J96 Spatulas 15 No. Dial Thermometers 10 To 210 Deg.c 15 No. J98 Gloves for Handing Hot Material 60 Pairs J99 Rubber Gloves To Remove Specimens From Water Bath 60 Pairs J100 Flat Bottomed Scoop 6 No. J101 Ladle for Placing Mixture In Moulds 6 No. Percentage Refusal Density Test Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported 17 Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) 6 Set Local/ Imported J102 Vibratory Hammer a Minium Power Consumption of 75w Operating At 50 Or 60 Hz Complete with Shanks, Tampers, 8 Moulds And 9 Base Plates Maximum s.g. of Bitunmous Paving Mixtures(ASTM D2041) Balance of Sufficient Capacity And Sensitivity To Enable Maximum Specific Gravity of Samples of Uncompacted Paving Mixtures To Be Calculated To At Least Four Significantfigures.It Shall Be Equipped with a Suitable Suspension Apparatus To Permit Weighingof The Samples While Suspended Centre of The Pan J103 3 NO. J104 Vacuum Pump 3 No. J105 Glass Or Metal Container of At Least 1000ml Capacity It Shall Be Sufficiently Strong To Withstand a Partial Vacuum.It Shall Have a Over Fitted with a Rubber Gasket And a Hose Conection.Fine Wire Mesh Shall Cover The Hose Opening To Provent Loss of Fines. Quantitative Extraction of Bitumen ASTM D2127 And ASTM D95 3 No. J106 Water Bath for Use with Bowl Suitable for Immersing The Bowl And Apparatus for Suspending The Bowl From The Centre of The Scale Pan. 3 No. J107 Oven Capable of Maintaining Temparature At 100 To 104 Deg.c 3 No. J108 Flat Pan 300 Mm×200mm×25mm Deep . 3 No. J109 Balance Capaity 5000 g Accurate To

0.2g 3 No. 18 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J110 Balance Capacity 15000 g Accurate t o

1.0 g 3 No. Balance Capaity 5000 g Accurate To

1.0g 8 No. J112 Small Mouth Graduate 1000 Ml Capacity 9 No. J113 Ignition Dish 125 Mm Capacity 6 No. J114 Desiccator 3 No. J115 Analytical Balance 3 No. J116 Centrifuge To Astm e2172 3 No. J117 Filter Rings for Centrifuge 1,500 No. J118 Reflux Condenser To Astm e95 12 No. J119 Trichloethylene Reagent Grade 1,500 Itr J120 Extractor Fan 3 No. Recovery of Bitumen From Solution J121 Centrifuge To Aashto t170 3 No. J122 Centrifuge Tubes 60 No. J123 Distillation Assembly To Aasthto t170 3 No. J124 Water Jacketed Condenser 3 No. J125 Astm Low Distillation Thermometer with Range -2 To 300 Deg. c 6 No. J126 Gas Flow Meter 3 No. J127 Corks Drilled As Aashto t170 60 No. J128 Separator Funnel 125 Ml Capacity 3 No. J129 Supply of Carbon Dioxide 300 Kg. Miscellaneous Laboratory Reagents J130 Flexing Tubing 150 m 19 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J131 Sodium Hexamataphosphate 30 Kg. J132 Sand for Density Test 500 Kg. J133 Calcium Carbide 30 Kg. J134 Sodium Sulphate(Anhydrous Salt) 60 Kg. J135 Sodium Hydroxide(Reagent Grade) 3 Kg. J136 Sulphuric Acid (Concentrated) 2 Itr Miscellaneous Laboratory Equipment J137 Rolling Straight Edge 3 No. J138 Wheel Barrow 18 No. J139 Dustpan Brush 12 No. J140 Shovel 30 No. J141 Pick Axe with Handle 18 No. J142 Metal Scoop.Large(150 Mm Wide) 12 No. J143 Metal Scoop. Medium (100 Mm Wide) 18 No. J144 Garden Trowel 12 No. J145 Steel Tray 0.3m×0.3m×0.01m Deep 60 No. J146 3.5 Kg Hammer 6 No. J147 7 Kg Hammer 6 No. J148 Rubber Mallet (1 Kg ) 12 No. J149 Cold Steel Chisel 18 No. J150 1.0 Metre Straight Edge 9 No. J151 Oven,Electric Thermostatically Controlled To Any Temperature From 10° To 150℃ ,0.225m3 Main Capacity Including Dial Thermometer Range 10°-160℃(BS 1377) 12 No. J152 As Ltem 214 Above But Gas 6 No. J153 Single Plate Electric Cooker 6 No. 20 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J154 3 Metre Straight Edge Including Calibratded Wedges 3 No. J155 J156 J157 Moisture Content Tin,75mm Diameter,Cadmium Plated Or Aluminium with Lids Liquid Limit Device,Complete with 2 Grooving Tools To BS 1377, And Gauge Cone Pentrometer with Test Gauge,Automatic Controller,Penetration Test Cup,Metal Straight Edge And Spare Cone 500 No. 6 No. 12 No. J158 500mm×500mm×10mm Glass Plate(BS 1377) 12 No. J159 Steel Rod 75mm Long ×3.2mm Diameter 6 No. J160 Palette Knife 200 Mm Long Blade 18 No. J161 Palette Knife 100 Mm Long Blade 18 No. J162 BS Sieve 300 Mm Diameter,37.5 Mm 3 No. J163 BS Sieve 300 Mm Diameter,20 Mm 3 No. J164 BS Sieve 300 Mm Diameter,5 Mm 3 No. J165 BS Sieve 300 Mm Diameter,0.6 Mm 3 No. J166 BS Sieve 300 Mm Diameter,0.425 Mm 6 No. J167 BS Sieve 300 Mm Diameter,0.3 Mm 3 No. J168 BS Sieve 300 Mm Diameter,0.075 Mm 12 No. J169 Lid And Receiver for The Each of The Above Seives 3 Set. J170 BS Sieve Brush 3 No. J171 Measuring Cylinder Set,25ml,100ml,500ml,1000ml,2000ml 9 Set. J172 Glass Jar Capacity 5 Litres with Lid 60 No. 21 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J173 200mm×200mm×20mm Cadmium Plated Or Aluminium Tin 150 No. J174 Electronic Balance Capacity 1000 g Accurate To 0.01 g 6 No. J175 Electronic Top-Pan Balance 2500 g Capacity, Sensitive To 0.01g 4 No. J176 Balance 2000 g Capacity Accurate To

0.1g (Manual) Including Weights 8 No. J177 Balance 50 Kg Capacity Accurate To 10 g Including Weights 8 No. J178 Still for Producing Distilled Water 3 No. J179 Polythene Or Glass 20 Litres Storage Vessels with Tap At The Bottom 3 No. J180 Stiff Broom 12 No. J181 Vernier Calipers,150 Mm 3 No. J182 Vernier Calipers,250 Mm 3 No. J183 Pestel And Mortar 3 No. J184 Linear Shrinkage Mould(BS 1377) 30 No. J185 Average Least Dimension Gauge 3 No. J186 Lockable Tool Box Containing:1 Pair "Molegrips",2×150 Mm Screw Driver,2×200 Mm Screw Driver,2×300 Mm Screw Driver,2×200 Mm Screw Driver,2×300 Mm Screw Driver,(1 Standard And 1 Phillips Head of Each )Adjustable Spanners 200 Mm And 300 Mm , 1 Pair Roundnose 4 No. J187 Plastic Or Metal Bucket Including Lid, 10 Litres Capacity 30 No. J188 Polythene Wash Bottle (500 Ml) 18 No. J189 20 Litre Capacity Jerricans Complete with Lid for Storage of Water 60 No. J190 a4 Size Clipboard 30 No. 22 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J191 Thermometer ,Range-50℃ To 150℃, Glass(BS 593) 12 No. J192 Laboratory Thermometer , Range 0° To +250℃ (BS 593) 6 No. J193 Maximum/Minimun Thermomter (BS b692) 3 No. J194 Rain Guage 9 No. J195 Portable Dial Thermometer + 50℃ -+ 250 ℃ Accurate To ±3% with 0.75 m Long Stem 6 No. J196 Pocket Dial Gauge Thermometer + 50℃ To + 250 ℃ Accurate To ±3% with 0.1 m Long Stem 12 No. J197 Hot Plate 200 Mm Diameter with Simmerstat Heat Control Unit 6 No. J198 5 Litres Capacity Steel Storage Containers with Leak And Dust Proof Lids for Storage of Bitumen Samples 300 No. J199 450 Mm Diameter × 150 Mm Deep Karais 36 No. Concrete:Slump And Cube Manufacture J200 Slump Cone,Tamping Rod And Base Board 6 Set J201 Concrete Cube Mould, 150 Mm × 150 Mm 150mm 90 No. J202 Soaking Tank for Cubes(Capacity 50 No.) 3 No. J203 Tamping Steel Bar, 13 Mm Diameter ,300 Mm Long 9 No. Concrete:Cube Compression Testing 23 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J204 Concrete Compression Machine To BS ,1610 Grade a, Electric/Manually- Operated with 300 Mm Gauge,Rectangular Plattens ,1650 Kn Capacity. 4 No. J205 Safety Guard for Equipment In Ltem 189 Above. 4 No. J206 50 mm Distance Spacer for Ltem 189 Above. 8 No. J207 70 mm Distance Spacer for Ltem 189 Above. 8 No. J208 100 mm Distance Spacer for Ltem 189 Above. 8 No. J209 Mechanical Load Pacer 4 No. Aggregates And Chippings Sand Equivalent Equipment To Aashto t176 Including a Graduated Plastic Cylinder,Rubber Stopper,Irrigation Tube,Weighted Fill Assembly Siphon Assembly, 85 Ml Tinned Box ( 57 Mm Dia. ),Wide Mouth Funnel (100 Mm Dia.),Stop Clock,Mechanical Shaker And 10 Litr J210 4 Set J211 Beaker 250 Ml 6 No. J212 Thermometer, 0℃ To + 50℃ 6 No. J213 Thermometer, 0℃ To + 250℃ 6 No. J214 Reagent Grade Silica Gel,500 g Container 60 No. J215 Aggregate Crushing Value Apparatus ,130 Mm Nominal Diameter ,Including Plunger And Base Plate 4 No. J216 Tamping Rod And Metal Measure for Above (BS 812) 4 Set J217 Transverse Distribution of Spray Test for Bitumen Distributor ( Depot Tray Test To BS 1707) Equipment 4 Set 24 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J218 Steel Tray 20 Mm Deep × 0.1㎡ (for Measuring Bitumen Spray Quantity ) 15 No. J219 Purpose Made Detachable Handle 1.5 m Long To Enable The Above Trays To Be Picked Up 6 No. J220 Parraffin Wax J221 Gas 150 kg 4,800 kg J222 Gunny Sack 7,200 No. J223 Plastic Bag 900 Mm × 450 Mm × 1000 Gauge 12,000 No. J224 Plastic Bag 450 Mm × 300 Mm × 1000 Gauge 6,000 No. J225 Filter Paper 150 Mm Dia. Watman No. 5 ( Boxes of 100) 300 No. J226 Filter Paper 400 Mm Dia. Watman No. 5 ( Boxes of 101) 60 No. J227 Filter Paper 100 Mm Dia. Watman No. 5 ( Boxes of 100) 60 No. J228 Trichloroethylene ( 205 Litre Drum ) 6 No. J229 Cotton Waste ( Or Drying Cloths ) 300 kg J230 Filter Paper 270 Mm Dia. with 33 Mm Dia. Hole In Centre ,Watman No. 5 ( Boxes of 100) 45 No. J231 Filter Paper 400 Mm Dia. Watman No. 54 ( Boxes of 100) 30 No. J232 Gas Cylinder Compatible with Stove Supplied Under Ltem 27 300 No. J233 Set of Laboratory Cleaning And Washing Up Equipment. 3 No. J234 Set of Curtains for All Windows for The office And Laboratory 3 No. 25 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) Preconditioning of Bitumen Samples Prior to Mixing or Testing J234 Heating oven 1 No. J235 Aluminum foil, metal lids 1 No. J236 Sample Containers 5 No. Density of Bituminous Binders J237 Balance accurate to 0.01grams 1 No. J238 Standardized pycnometers 1 No. J239 Water bath J240 Thermometer 1 No. 1 No. Flash and Fire Point by Cleveland Open Cup J241 Cleveland Open Cup apparatus 1 No. J242 Square shield 1 No. J243 Thermometer ASTM11C 1 No. J244 Barometer 1 No. Density and Water Absorption of Aggregates Retrieved on a 4.75 mm Sieve J245 Heating oven 1 No. Density and Water Absorption of Aggregates Passing the 4.75 mm Sieve J246 Pycnometer 1 No. J247 Vacuum type dessicator 1 No. J248 Vacuum Pump J249 Metal mould J250 Metal tamper 1 No. 1 No. 1 No. Indirect Tensile Strength Test 26 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J251 Typically marshall type test apparatus 1 No. J252 An indirecet tensile stress loading frame 1 No. Determination of Binder Content and Aggregate Grading by Extraction J253 Extraction apparatus 1 No. J254 Electric hot plate 1 No. J255 Centrifuge with approx.3500 rotations per minute 1 No. J256 Centrifuge cylinders 1 No. J257 Steel Rod 75mm Long ×3.2mm Diameter 1 No. J258 Large flat pan 1 No. J259 Heat insulated gloves 5 No. J260 Solvent Proof goves 5 No. In situ Density and Moisture content of bituminous layers in-place by nuclear methods. J261 Nucleus density instrument 1 no. Standard practice for accelerated aging of asphalt binder using a Pressure Aging Vessel (PAV) J262 Pressure Aging Vessel (PAV) 1 no. Standard test method for determining the rheological properties of asphalt binder using a Dynamic Shear Rheometer (DSR) J263 Dynamic Shear Rheometer (DSR) 1 no. Standard test method for viscosity determination of asphalt binder using Rotational Viscometer 27 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) J264 Rotational Viscometer 1 no. Standard method for preparing and determining the density of hot mix asphalt (HMA) specimens by means of the Superpave Gyratory Compactor J265 Superpave Gyratory Compactor 1 no. Flash and Fire Points by Cleveland Open Cup (more common for asphalt cement used in HMA) J266 Flash points test machine 1 no. J267 Fire points test machine 1 no. Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA) J268 Asphalt Pavement Analyzer (APA) 1 no. Viscosity of Asphalts by Vacuum Capillary Viscometer J269 Vacuum Capillary Viscometer 1 no. I I1 I4 I5 I7 I8 Services Vehicle Insurance Transportation Internet Services for construction of the ENGINEER'S ACCOMMODATION and OFFICES Services for HIV/AIDS, STIs, STDs AND CHILD ABUSE,SEXUAL HARRASMENT PREVENTION AND AWARENESS PROGRAMS AND TRAINING 28 Contract Contract Contract Contract Contract 1 3 1 1 1 Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local/ Imported Local Local Local Local Local Local Value Added Tax (Exemption) (Upgrading Of Kabingo – Kasulu- Manyovu (260.6 Km) Road To Bitumen Standard, Lot 3: Mvugwe – Nduta Junction (59.35 Km) (Tanzania National Roads (Tanroads)) (M/S Stecol Corporation) GN. NO. 789 (Contd.) I9 I10 I11 Services for ROAD SAFETY IMPROVEMENT, TRAINING AND AWARENESS PROGRAMS Services for STONE PITCHING, RIPRAP AND GABIONS Services for BRIDGE PILLING WORKS I12 Services for ELECTRICAL WORKS I13 Servicesk for DRILLING BOREHOLE WORKS I14 Services for STREET LIGHT I15 Maintanence for Equipment&Vehicles Contract Contract Contract Contract Contract Contract Contract 1 3 1 1 1 1 1 Local Local Local Local Local Local Local Dodoma, PHILIP I. MPANGO 11th sept,2020 Minister of Finance and Planning 29