Louisiana restricts mercury-added products from being sold, used, or distributed for promotion if they exceed specified mercury-content limits, with exemptions and a written exemption process for manufacturers.
§2576. Exemptions and phase outs A. No mercury-added product shall be offered for final sale or use or distributed for promotional purposes in Louisiana if the mercury content of the product exceeds: (1) 1 gram (1,000 milligrams) for mercury-added fabricated products or 250 parts per million (ppm) for mercury-added formulated products, on and after July 1, 2008. (2) 100 milligrams for mercury-added fabricated products or 50 parts per million (ppm) for mercury-added formulated products, effective July 1, 2010. (3) 10 milligrams for mercury-added fabricated products or 10 parts per million (ppm) for mercury-added formulated products, effective July 1, 2012. B. For a product that contains one or more mercury-added products as a component, this Section is applicable to each component part or parts and not to the entire product. C. For a product that contains more than one mercury-added product as a component, the phase out limits specified in Subsection A of this Section shall apply to each component and not the sum of the mercury in all of the components. For a newly manufactured automobile containing mercury-added displays and lighting, the phase out limits would apply to each component separately, and not the combined total of mercury in all of the components. D. Fluorescent lamps shall be exempt from the requirements of Subsection A of this Section. On and after July 1, 2014, the mercury content of fluorescent bulbs must either not exceed 10 milligrams or the manufacturer must comply with the exemption requirements pursuant to Subsection F of this Section. E. A mercury-added product shall be exempt from the limits on total mercury content set forth in Subsection A of this Section, if the level of mercury or mercury compounds contained in the product are required in order to comply with federal or state health, safety, or homeland security requirements. In order to claim exemption under this Section the manufacturer must notify, in writing, the Department of Environmental Quality and provide the legal justification for the claim of exemption. F. The department shall promulgate regulations that provide for manufacturers to apply for exemptions from this Subsection. Such rules shall provide that manufacturers of a mercury-added product may apply to the Louisiana Department of Environmental Quality for an exemption from the limits on total mercury content set forth in Subsection A of this Section for a product or category of products. Applications for exemptions must document the basis for the requested exemption or renewal of exemption; describe how the manufacturer will ensure that a system exists for the proper collection, transportation, and processing of the products at the end of their useful life; and document the readiness of all necessary parties to perform as intended in the planned system. The Department of Environmental Quality may grant with modifications or conditions an exemption for a product or category of products if it finds that a system exists for the proper collection, transportation, and processing of the mercury-added product. Such a system may include direct return of a waste product to the manufacturer or an industry or trade group that supports a collection and recycling system, or other similar private and public sector efforts and it considers each of the following criteria: (1) Use of the product is beneficial to the environment or protective of public health or protective of public safety. (2) There is no technically feasible alternative to the use of mercury in the product. (3) There is no comparable non-mercury-added product available at reasonable cost. G. Prior to issuing an exemption the Department of Environmental Quality shall consult with neighboring states and regional organizations to promote consistency. The state shall avoid to the extent feasible inconsistencies in the implementation of this Section. Upon reapplication by the manufacturer and findings by the Department of Environmental Quality of continued eligibility under the criteria of this Subsection and of compliance by the manufacturer with the conditions of its original approval, an exemption may be renewed one or more times and each renewal may be for a period of no longer than two years. Acts 2006, No. 126, §1, eff. June 2, 2006.